ASPES

AAS1240 - Air Conditioning ASPES - Free user manual and instructions

Find the device manual for free AAS1240 ASPES in PDF.

📄 76 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ASPES AAS1240 - page 4
View the manual : English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Air Conditioner
Cooling Capacity 12000 BTU
Dimensions (W x D x H) 46 x 38 x 75 cm
Weight 28 kg
Power Supply 220-240 V, 50 Hz
Power Consumption (Cooling) 1050 W
Energy Efficiency Class A
Refrigerant R32
Noise Level (Max) 65 dB(A)
Airflow Rate (Max) 410 m³/h
Operating Modes Cool, Fan, Dehumidify, Auto
Fan Speeds 3 (Low, Medium, High)
Timer Function 24-hour programmable timer
Remote Control Yes, included
Castors Yes, for easy mobility
Exhaust Hose Length 1.5 meters
Self-Evaporating System Yes, no external drain required
Air Filter Washable mesh filter
Maintenance Clean filter every 2 weeks
Safety Features Overheat protection, auto restart
Warranty 2 years

Frequently Asked Questions - AAS1240 ASPES

How do I set up the exhaust hose for the AAS1240?
Connect the exhaust hose to the back of the unit and attach the window kit to the other end. Ensure the window is closed securely around the kit to prevent hot air from re-entering.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must be installed to expel hot air. Using it without the hose will cause the unit to overheat and reduce cooling efficiency.
How often should I clean the air filter?
Clean the washable mesh filter every two weeks or more often if used in dusty conditions. A dirty filter restricts airflow and reduces performance.
Why is water leaking from my unit?
If the unit is not self-evaporating properly, check the drain plug at the back. During high humidity, the internal tank may fill up and require manual draining. Refer to the manual for instructions.
What do the error codes on the display mean?
Common error codes: E1 (room temperature sensor fault), E2 (evaporator coil sensor fault). If an error appears, unplug the unit for 10 minutes and restart. If it persists, contact customer support.
How do I switch between cooling and fan mode?
Press the Mode button on the remote or control panel repeatedly to cycle through Cool, Fan, Dehumidify, and Auto modes. The selected mode will be indicated on the display.
Can I use an extension cord with the AAS1240?
No, do not use an extension cord. Plug the unit directly into a grounded wall outlet. Extension cords can cause voltage drops and overheating.
What is the maximum cooling area for this unit?
The AAS1240 is suitable for rooms up to 25-30 square meters (about 270-320 sq ft), depending on ceiling height and insulation.
How to store the unit during winter?
Clean the filter, run the unit in fan mode for a few hours to dry the interior, remove the exhaust hose, and store in a dry place. Keep it upright and cover to protect from dust.
Where can I download the user manual?
You can download the PDF manual from notice-facile.com by searching for 'AAS1240 Aspes'. It is available in English and other languages.

User questions about AAS1240 ASPES

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air Conditioning in PDF format for free! Find your manual AAS1240 - ASPES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AAS1240 by ASPES.

USER MANUAL AAS1240 ASPES

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ASPES

Model : AAS1240

Category : Air Conditioning