9022SR-1 - Screwdriver Hazet - Free user manual and instructions
Find the device manual for free 9022SR-1 Hazet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Impact Screwdriver |
| Brand | Hazet |
| Model | 9022SR-1 |
| Power Supply | 18 V lithium-ion battery |
| Dimensions (L x W x H) | 200 x 50 x 100 mm |
| Weight (with battery) | 1.5 kg |
| Max Torque | 180 Nm |
| No-Load Speed | 0 – 2800 rpm |
| Impact Function | Yes, up to 3200 impacts/min |
| Chuck | 1/4 inch hex chuck (6.35 mm) |
| Adjustable Torque | Yes, 20 positions + drill mode |
| Variable Speed | Progressive electronic |
| Motor Brake | Yes |
| LED Light | Yes, integrated |
| Spindle Lock | Yes |
| Hand Guard | Yes |
| Maintenance and Cleaning | Clean with a dry cloth; avoid solvents |
| Spare Parts Available | Chuck, battery pack, charger |
| Repairability | Repairability index 8/10 (estimate) |
| Usage | Professional |
Frequently Asked Questions - 9022SR-1 Hazet
Which battery is compatible with the Hazet 9022SR-1 screwdriver?
The Hazet 9022SR-1 uses an 18 V lithium-ion battery from the Hazet 9000 series. Make sure to use the original charger.
How to adjust the tightening torque?
Turn the adjustment ring located behind the chuck. The numbered positions correspond to increasing torques. Use drill mode for drilling without torque limit.
Does the screwdriver have an impact function?
Yes, the Hazet 9022SR-1 is an impact screwdriver. Activate it by turning the ring to the hammer symbol. Ideal for screwing into concrete or masonry.
How to change the chuck?
The hex chuck releases by pulling the locking ring forward. Insert the new bit until it clicks into place. Make sure the spindle lock is activated.
What is the charging time of the battery?
With the Hazet fast charger, an empty battery charges to 80% in 30 minutes and fully in 1 hour.
Does the screwdriver have an LED light?
Yes, an integrated LED lights up automatically when you press the trigger. It illuminates the work area for 10 seconds after release.
How to clean the screwdriver?
Disconnect the battery. Clean the housing with a soft, dry cloth. Do not use solvents or water. Ventilation openings can be dusted with a brush.
What to do if the chuck no longer holds bits?
Check if the chuck is worn. Replace it if necessary. You can also clean the inside of the chuck with a lint-free cloth. If the problem persists, contact Hazet customer service.
What accessories are supplied with the screwdriver?
The Hazet 9022SR-1 is supplied with two 18 V batteries, a fast charger, a storage case, and a set of screwdriver bits (Phillips, Torx, slotted).
How to activate the motor brake?
The motor brake is automatic. When you release the trigger, the electric brake immediately stops the chuck to prevent screw drift.
User questions about 9022SR-1 Hazet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual 9022SR-1 - Hazet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9022SR-1 by Hazet.
USER MANUAL 9022SR-1 Hazet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hazet
Model : 9022SR-1
Category : Screwdriver