HYSG150-2 - Grinder HYUNDAI - Free user manual and instructions
Find the device manual for free HYSG150-2 HYUNDAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Angle Grinder |
| Brand | Hyundai |
| Model | HYSG150-2 |
| Disc Diameter | 150 mm |
| Rated Power | 850 W |
| No-Load Speed | 11000 rpm |
| Voltage | 220-240 V ~ 50/60 Hz |
| Weight | 2.3 kg |
| Spindle Thread | M14 |
| Protection Class | II (Double Insulation) |
| Lock-On Switch | Yes |
| Spindle Lock | Yes |
| Soft Start | No |
| Variable Speed | No |
| Handle Type | Side handle (optional) |
| Included Accessories | Grinding disc, side handle, wrench, guard |
| Maintenance | Regular cleaning of ventilation slots, carbon brush replacement when worn |
| Security Features | Protection guard, lock-off switch, anti-restart protection |
| Warranty | 2 years |
Frequently Asked Questions - HYSG150-2 HYUNDAI
How do I change the grinding disc on my Hyundai HYSG150-2?
First, unplug the grinder. Press the spindle lock to hold the shaft, then use the wrench to loosen the flange nut. Remove the old disc, place the new one, and tighten the nut securely. Ensure the disc is rated for the tool's speed.
What safety precautions should I take when using the angle grinder?
Always wear safety goggles, gloves, and hearing protection. Ensure the guard is in place. Do not use damaged discs. Keep the cord away from the cutting area. Never operate without proper training.
Can I use the HYSG150-2 for cutting metal?
Yes, with the appropriate cutting disc. The tool is suitable for cutting and grinding metal. Ensure you use a disc rated for the speed and size (150 mm). Apply light pressure and let the tool do the work.
What is the maximum disc speed for this grinder?
The no-load speed is 11000 rpm. Always use discs with a maximum permissible speed equal to or higher than this value.
How do I clean and maintain my grinder?
After use, unplug and blow out dust from ventilation slots with compressed air. Check carbon brushes every 50 hours of use and replace if worn. Keep the tool dry and store in a clean place.
My grinder stops during use. What could be the cause?
Possible causes: overload (tool may have thermal protection), damaged power cord, worn brushes, or a faulty switch. Let the tool cool down and check for blockages. If persists, contact a service center.
Is the side handle necessary?
Yes, always use the side handle to maintain control and reduce vibration. It can be mounted on either side for comfort.
Can I use this grinder for polishing?
Yes, with a polishing pad attachment. Ensure the pad is suitable for the spindle thread (M14). Reduce speed if possible (note: this model is fixed speed, so use discs rated for 11000 rpm).
What type of disc should I use for masonry?
Use a diamond cutting disc or abrasive disc specifically for masonry. Always check the disc's maximum rpm rating. Do not use a wood cutting disc on masonry.
Where can I find replacement parts for the HYSG150-2?
Replacement parts such as brushes, flanges, and guards are available from Hyundai authorized service centers. Check the manual for part numbers or contact Hyundai support.
User questions about HYSG150-2 HYUNDAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual HYSG150-2 - HYUNDAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HYSG150-2 by HYUNDAI.
USER MANUAL HYSG150-2 HYUNDAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HYUNDAI
Model : HYSG150-2
Category : Grinder