Newland

NLS-HR1580-BT - Barcode Reader Newland - Free user manual and instructions

Find the device manual for free NLS-HR1580-BT Newland in PDF.

📄 231 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Newland NLS-HR1580-BT - page 13
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Barcode Reader
Brand Newland
Model NLS-HR1580-BT
Dimensions (approx.) 170 x 70 x 100 mm
Weight (approx.) 200 g
Power Supply Rechargeable lithium-ion battery (1800 mAh) via USB
Interface Bluetooth, USB
Scanning Technology Image-based (CMOS) for 1D/2D barcodes
Reading Distance Up to 30 cm
Scan Angle ±60° horizontal, ±40° vertical
Main Features High-speed scanning, Bluetooth transmission, data storage, hands-free mode
Indicators LED (good read), buzzer
Maintenance Clean with soft, dry cloth; avoid liquids
Safety Class 1 laser product (safe for eyes)
Spare Parts Battery, charging cable, manual
Repairability Battery replaceable (unscrew back cover); other repairs by service center
Operating Temperature 0°C to 45°C
Storage Temperature -20°C to 60°C
Humidity 5% to 95% non-condensing
Drop Resistance 1.5 m onto concrete

Frequently Asked Questions - NLS-HR1580-BT Newland

How do I pair the NLS-HR1580-BT with my device?
Turn on the scanner, enable Bluetooth on your device, and select 'NLS-HR1580-BT' from the list. For detailed steps, refer to the Bluetooth pairing section in the manual.
What barcode types does it support?
It supports most common 1D (UPC, EAN, Code 39, etc.) and 2D (QR, Data Matrix, PDF417, etc.) barcodes.
How to charge the scanner?
Use the USB cable to connect the scanner to a computer or USB power adapter. The LED will indicate charging status. A full charge takes about 3 hours.
My scanner is not reading barcodes. What should I do?
Ensure the scanner is powered on and properly paired. Clean the window with a soft cloth. Check that the barcode is not damaged. If the problem persists, perform a factory reset.
How to perform a factory reset?
Press and hold the trigger button for 10 seconds until you hear two beeps. Release the button; the scanner will reset to default settings.
Can I use it without Bluetooth via USB?
Yes, you can connect the scanner to a computer via USB and use it as a wired barcode reader. The USB also provides power.
What is the battery life?
The battery lasts approximately 8 hours of continuous use. Standby time is up to 30 days.
Is it waterproof or dustproof?
It has an IP42 rating, meaning it is protected from solid objects >1mm and water spray at 15° angle. Do not immerse in water.
How to clean the scanner?
Turn off the scanner and gently wipe the housing and window with a soft, lint-free cloth. Do not use solvents or abrasive cleaners.
Where can I download the user manual?
The manual is available for free download from notice-facile.com. You can also request a translated version via email.

User questions about NLS-HR1580-BT Newland

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Barcode Reader in PDF format for free! Find your manual NLS-HR1580-BT - Newland and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NLS-HR1580-BT by Newland.

USER MANUAL NLS-HR1580-BT Newland

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Newland

Model : NLS-HR1580-BT

Category : Barcode Reader