Aironet 1562D - Access Point CISCO - Free user manual and instructions
Find the device manual for free Aironet 1562D CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Wireless Access Point |
| Model | Aironet 1562D |
| Brand | Cisco |
| Dimensions (W x D x H) | 23.5 x 23.5 x 5.1 cm (9.25 x 9.25 x 2.0 in) |
| Weight | 1.2 kg (2.65 lbs) |
| Power Supply | 802.3at PoE+ or 12V DC adapter (sold separately) |
| Power Consumption | 25.5W (max) |
| Wireless Standards | 802.11a/b/g/n/ac Wave 2 |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Maximum Data Rate | 1.73 Gbps (5 GHz) + 800 Mbps (2.4 GHz) |
| Antenna Type | Integrated dual-band omni-directional |
| Mounting | Pole or wall mount (bracket included) |
| Operating Temperature | -40°C to 55°C (-40°F to 131°F) |
| Ingress Protection | IP67 |
| Management | Web GUI, CLI, Cisco Prime, DNA Center |
| Security | WPA2, WPA3, 802.1X, MAC filtering |
| Cleaning | Wipe with a dry cloth; avoid liquids |
| Spare Parts | Power supply, mounting kit, antennas (if separable) |
| Warranty | Limited lifetime hardware warranty |
Frequently Asked Questions - Aironet 1562D CISCO
How do I reset the Cisco Aironet 1562D to factory defaults?
Press and hold the Reset button (located on the device) for at least 10 seconds using a paperclip. The device will reboot with factory settings.
What is the default IP address and login credentials?
The default IP is 10.0.0.1. Default username is Cisco and password is Cisco (case-sensitive).
Can I power the access point via PoE?
Yes, it supports 802.3at PoE+ (Power over Ethernet). Ensure your switch provides sufficient power (25.5W).
How do I mount the Aironet 1562D outdoors?
Use the included mounting bracket to attach to a pole or wall. Ensure the device is oriented with the LEDs facing down for optimal weather protection.
What is the maximum number of clients supported?
Up to 200 clients per radio, depending on traffic and environment.
How do I configure the access point for the first time?
Connect via Ethernet to the management port, set your PC IP to 10.0.0.x, open a browser to 10.0.0.1, and follow the setup wizard.
Does the device support mesh networking?
Yes, it can operate in mesh mode using Cisco's Flexible Radio Assignment (FRA) technology.
What should I do if the power LED does not light up?
Check PoE source or DC adapter. Verify Ethernet cable is intact and switch port is delivering power. If using DC, ensure adapter is 12V/2A minimum.
How do I update the firmware?
Download the latest firmware from Cisco.com. Log into the web GUI, go to Administration > File Management, upload the image, and reboot.
Is the access point compatible with Cisco DNA Center?
Yes, the 1562D is fully supported by Cisco DNA Center for centralized management and analytics.
User questions about Aironet 1562D CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual Aironet 1562D - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Aironet 1562D by CISCO.
USER MANUAL Aironet 1562D CISCO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CISCO
Model : Aironet 1562D
Category : Access Point