Aironet 1532E - Access Point CISCO - Free user manual and instructions
Find the device manual for free Aironet 1532E CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Access Point |
| Brand | Cisco |
| Model | Aironet 1532E |
| Dimensions (H x W x D) | 11.2 x 8.7 x 3.1 in (284 x 221 x 79 mm) |
| Weight | 4.4 lb (2.0 kg) |
| Power Input | 802.3af PoE or 12V DC |
| Power Consumption | 12.95 W (PoE) / 10 W (DC) |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Max Data Rate | 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) |
| Antenna Connectors | 2 x RP-TNC (internal antennas included) |
| Ethernet Ports | 1 x 10/100/1000 BASE-T (PoE In) |
| Security Features | WPA2, WPA3, 802.1X, MAC filtering, rogue detection |
| Mounting | Pole, wall, or ceiling mount (hardware included) |
| Operating Temperature | -40°F to 131°F (-40°C to 55°C) |
| Ingress Protection | IP66 |
| Management | Web GUI, CLI, SNMP, Cisco Wireless LAN Controller |
| LED Indicators | Power, Ethernet, Radio, PoE status |
| Included Accessories | Mounting bracket, power injector (optional), documentation |
| Maintenance | Keep clean and dry; no user-serviceable parts inside |
Frequently Asked Questions - Aironet 1532E CISCO
How do I reset the Cisco Aironet 1532E to factory defaults?
Press and hold the Reset button on the back panel for at least 10 seconds until the LEDs flash. The device will reboot with factory settings.
Can I use this access point indoors?
The Aironet 1532E is designed for outdoor use with an IP66 rating. It can be used indoors but may have better performance outdoors.
What power options are available?
It supports 802.3af Power over Ethernet (PoE) or an optional 12V DC power adapter. PoE is recommended for easier installation.
How do I connect to the access point for initial setup?
Connect a computer to the Ethernet port, set a static IP in the 10.0.0.x range, then access the web GUI at 10.0.0.1 using default credentials (admin/admin).
What wireless security modes are supported?
The device supports WPA2-PSK, WPA3-PSK, WPA2-Enterprise (802.1X), and guest access with captive portal.
Can I mount it on a wall?
Yes, the included mounting bracket allows pole, wall, or ceiling mounting. Use the wall mount option with appropriate screws.
How do I update the firmware?
Download the latest firmware from Cisco's website, then upload it via the web GUI under Administration > Firmware Upgrade. Do not power off during update.
What is the maximum number of clients supported?
The access point can handle up to 200 concurrent clients under typical conditions, though performance depends on traffic.
Does it support mesh networking?
Yes, the Aironet 1532E can operate in mesh mode when configured with a Cisco Wireless LAN Controller.
How do I troubleshoot intermittent connectivity?
Check for RF interference from other devices, ensure the antennas are properly connected, and verify the PoE power supply is adequate.
User questions about Aironet 1532E CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual Aironet 1532E - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Aironet 1532E by CISCO.
USER MANUAL Aironet 1532E CISCO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CISCO
Model : Aironet 1532E
Category : Access Point