Akurate 2200 - Receiver Linn - Free user manual and instructions
Find the device manual for free Akurate 2200 Linn in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Integrated Amplifier / Receiver |
| Brand | Linn |
| Model | Akurate 2200 |
| Power Output | 2 x 100 W (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Total Harmonic Distortion | < 0.01% |
| Input Sensitivity | 200 mV (line) |
| Input Impedance | 47 kΩ |
| Audio Inputs | 4x RCA line, 1x XLR balanced, 1x Phono (MM) |
| Audio Outputs | 1x Pre-out, 1x Headphone (6.35mm) |
| Speaker Outputs | 2 pairs binding posts (bi-wire capable) |
| Power Consumption | 500 W (max), < 1 W (standby) |
| Dimensions (W x H x D) | 440 x 100 x 350 mm |
| Weight | 12 kg |
| Finish | Silver or Black anodized aluminum |
| Remote Control | Linn Handheld Remote (included) |
| Power Supply | 100-240 V AC, 50/60 Hz, internal toroidal transformer |
| Protection Features | Overcurrent, overvoltage, thermal, and short circuit protection |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents or abrasive cleaners. |
| Repairability | Serviceable by authorized Linn technicians only; modular design |
| Environmental Operating Temp | 5°C to 35°C |
Frequently Asked Questions - Akurate 2200 Linn
How do I connect my Linn Akurate 2200 to speakers?
Use high-quality speaker cables. Connect the positive terminal of the amplifier to the positive terminal of the speaker, and negative to negative. The Akurate 2200 supports bi-wiring if your speakers have separate terminals.
Can I use the Akurate 2200 with a turntable?
Yes, it has a built-in phono stage for moving magnet (MM) cartridges. Connect your turntable to the Phono input.
What is the standby power consumption?
The standby power consumption is less than 1 watt, making it energy efficient.
How do I update the firmware?
Firmware updates are performed by a Linn dealer or via a USB connection (if applicable). Refer to the user manual for specific instructions.
Does the Akurate 2200 have a headphone output?
Yes, it has a 6.35mm headphone jack located on the front panel. It uses a dedicated headphone amplifier circuit.
What is the recommended cleaning method?
Use a soft, lint-free cloth slightly dampened with water or mild detergent. Avoid harsh chemicals, alcohol, or abrasive materials.
Can I use the Akurate 2200 in a multi-room system?
Yes, it can be integrated into a Linn multi-room system via Exakt or standard analog connections. Consult a Linn specialist for configuration.
What warranty does the Akurate 2200 have?
Linn offers a 5-year warranty for the original purchaser, covering manufacturing defects. Proof of purchase is required.
How do I reset the amplifier to factory settings?
To reset, turn off the unit, then press and hold the 'Power' button for 10 seconds until the LED flashes. Release and turn on again.
Is the Akurate 2200 compatible with high-impedance headphones?
The headphone output is designed to drive most headphones, including high-impedance models (up to 600 ohms), with sufficient power.
User questions about Akurate 2200 Linn
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Akurate 2200 - Linn and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Akurate 2200 by Linn.
USER MANUAL Akurate 2200 Linn
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Linn
Model : Akurate 2200
Category : Receiver