Klout - Receiver Linn - Free user manual and instructions
Find the device manual for free Klout Linn in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Power Amplifier |
| Brand | Linn |
| Model | Klout |
| Power Output | 100W per channel into 8 ohms |
| Frequency Response | 10 Hz – 50 kHz ±0.1 dB |
| Total Harmonic Distortion | < 0.01% |
| Input Impedance | 10 kΩ (balanced), 47 kΩ (unbalanced) |
| Input Connectors | 1 x XLR balanced, 1 x RCA unbalanced |
| Output Connectors | 2 pairs of binding posts |
| Amplifier Class | Class AB |
| Dimensions (W x H x D) | 432 mm x 80 mm x 330 mm |
| Weight | 10.5 kg |
| Power Consumption | 350W maximum |
| Standby Power Consumption | < 1 W |
| Protection Features | Overload, short-circuit, thermal protection |
| Cooling | Convection cooling via heatsinks |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquids or solvents. |
| Safety Precautions | Disconnect power before cleaning. Keep away from moisture. |
| Country of Origin | United Kingdom (Scotland) |
| Spare Parts Availability | Contact authorized Linn dealers or service centers |
Frequently Asked Questions - Klout Linn
What is the power output of the Linn Klout?
The Linn Klout delivers 100 watts per channel into 8 ohms, with high current capability for low impedance loads.
Can I use the Klout in bridged mode?
No, the Klout is not designed for bridged operation. It is a stereo amplifier intended for two-channel use.
What type of inputs does the Klout have?
It features both balanced XLR and unbalanced RCA inputs, selectable via internal jumpers.
Is the Klout compatible with bi-wiring?
Yes, the Klout has two pairs of binding posts per channel, allowing bi-wiring or bi-amping configurations.
Does the Klout have a remote trigger?
No, the Klout does not include a remote trigger input. It requires manual power switching via the rear rocker switch.
What is the recommended speaker impedance?
The amplifier is stable into loads from 4 ohms to 16 ohms. For 4 ohm loads, ensure adequate ventilation.
How do I clean the Klout?
Turn off and unplug the unit, then gently wipe the surface with a soft, dry cloth. Do not use any cleaning agents.
Can I stack other components on top of the Klout?
It is not recommended to block the heatsinks. Provide at least 10 cm clearance above and below for proper ventilation.
What is the warranty period for the Linn Klout?
Linn typically offers a 5-year warranty for original owners. Check with your dealer for specific terms.
Where can I purchase spare parts?
Spare parts are available through authorized Linn dealers or the official Linn service network.
User questions about Klout Linn
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Klout - Linn and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Klout by Linn.
USER MANUAL Klout Linn
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Linn
Model : Klout
Category : Receiver