CPM 2800 MKII - Receiver Chord - Free user manual and instructions
Find the device manual for free CPM 2800 MKII Chord in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Integrated Amplifier/Receiver |
| Model | CPM 2800 MKII |
| Brand | Chord Electronics |
| Dimensions (W x H x D) | 17.4 x 5.9 x 15.7 inches (442 x 150 x 399 mm) |
| Weight | 38.5 lbs (17.5 kg) |
| Power Output | 200 W per channel into 8 ohms |
| Frequency Range | FM: 87.5 – 108 MHz, AM: 530 – 1710 kHz |
| Input Sensitivity | Line: 0.3 mV, Phono MM: 3 mV |
| Signal-to-Noise Ratio | > 80 dB (stereo) |
| Total Harmonic Distortion | < 0.08% |
| Power Consumption | 800 W maximum |
| Connectivity | 5 analog inputs, 2 tape loops, 2 speaker outputs, headphone output |
| Functions | FM/AM tuner, volume/balance/bass/treble controls, loudness, mono/stereo |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents or abrasives. |
| Safety | Do not expose to moisture. Disconnect power before cleaning. |
| Spare Parts Availability | Contact Chord Electronics for service and replacement parts. |
| Repairability | Serviceable by qualified technicians. User-replaceable fuses. |
| Warranty | 2 years limited warranty (check local regulations) |
Frequently Asked Questions - CPM 2800 MKII Chord
How do I clean the CPM 2800 MKII?
Disconnect the power and use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasives.
Can I use the receiver with a subwoofer?
The CPM 2800 MKII does not have a dedicated subwoofer output. You can connect a subwoofer with high-level inputs in parallel with the main speakers.
Why is there no sound from one speaker?
Check the speaker connections and ensure the balance control is centered. Also verify that the source input is working and the speaker selector is set correctly.
How do I tune FM stations?
Press the TUNER button to select FM, then use the TUNING knob or up/down buttons to search for stations. You can also manually enter a frequency using the remote.
What is the recommended speaker impedance?
The receiver is designed for speakers with an impedance of 4 to 16 ohms. Use speakers with at least 90 dB sensitivity for best performance.
Does the receiver have Bluetooth?
No, the CPM 2800 MKII does not include built-in Bluetooth. You can add an external Bluetooth adapter via the analog input.
How do I reset the receiver?
Turn off the unit, wait 30 seconds, and turn it back on. For a factory reset, press and hold the POWER button for 5 seconds until the display flashes.
The remote control is not working. What should I do?
Replace the AAA batteries and ensure there are no obstructions between the remote and the receiver. Point the remote directly at the infrared sensor.
Can I bi-wire speakers with this receiver?
Yes, the CPM 2800 MKII has two sets of speaker terminals for each channel, allowing bi-wiring if your speakers support it.
How do I set the clock?
Press and hold the CLOCK button on the remote, then use the numeric keypad to enter the time (24-hour format). Press CLOCK again to confirm.
User questions about CPM 2800 MKII Chord
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CPM 2800 MKII - Chord and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CPM 2800 MKII by Chord.
USER MANUAL CPM 2800 MKII Chord
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chord
Model : CPM 2800 MKII
Category : Receiver