Dave - Receiver Chord - Free user manual and instructions
Find the device manual for free Dave Chord in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High-End DAC / Preamplifier (Receiver) |
| Brand | Chord |
| Model | Dave |
| Dimensions (W x H x D) | 340 mm x 60 mm x 250 mm |
| Weight | Approximately 5.2 kg |
| Power Supply | AC 100-240V, 50/60Hz, internal linear supply |
| Power Consumption | 10 W (typical) |
| Digital Inputs | USB Type B, AES/EBU (XLR), 2x SPDIF (coaxial), 2x Optical TOSLINK |
| Analog Outputs | 1x Stereo XLR balanced, 1x Stereo RCA unbalanced |
| Headphone Output | ¼" (6.35 mm) stereo jack, high-current output |
| DAC Technology | Proprietary WTA (Watts Transient Aligned) filter, 24-bit/384kHz, DSD128 |
| Frequency Response | 0Hz – 80kHz (-3dB) |
| Signal-to-Noise Ratio | 127 dB (A-weighted) |
| Total Harmonic Distortion + Noise | < -104 dB (1kHz, 2.5V RMS) |
| Remote Control | Infrared remote included |
| Display | High-resolution color LCD screen for status and settings |
| Maintenance | Wipe with dry, soft cloth. Do not use solvents. Keep away from moisture. |
| Safety Instructions | Operate at room temperature; do not block ventilation. Disconnect during storms. |
| Spare Parts & Repairability | Contact authorized Chord dealer for parts and service. No user-serviceable parts inside. |
| General Information | Designed and manufactured in UK. Supported sample rates up to 768kHz via USB. |
Frequently Asked Questions - Dave Chord
How do I connect my Chord Dave to a computer?
Use the USB Type-B input with a high-quality USB cable. Install the latest driver from Chord's website for Windows; macOS is class-compliant. Ensure the input is selected to USB.
What is the maximum sample rate supported?
The DAC supports PCM up to 768kHz and DSD up to DSD128 (DoP) via USB. Optical and coaxial inputs support up to 192kHz.
Can I use the Chord Dave as a preamplifier?
Yes, the Dave can be used as a digital preamplifier with volume control via the analog outputs. Connect directly to a power amplifier.
How do I update the firmware?
Download the latest firmware from the Chord website. Connect the Dave via USB to a Windows PC and run the firmware updater tool. Follow on-screen instructions.
Why is there no sound from my headphones?
Check that headphones are fully inserted and the volume is turned up. Ensure the headphone output is selected (press the HP button). Also verify the source is playing.
Can I control the Chord Dave via an app?
No, the Dave does not have app control. It uses the front panel buttons, knob, and remote control for operation.
What is the recommended warm-up time?
For optimal performance, allow the device to warm up for 30 minutes after power-on for internal components to stabilize.
How do I connect multiple digital sources?
Use the rear inputs: USB, AES/EBU, coaxial, and optical. Select the input via the front panel or remote. Only one input can be active at a time.
What does the 'Filter' button do?
The Dave offers several digital filter options (e.g., roll-off settings) that affect transient response. Cycle through them while listening to choose your preference.
Is the Chord Dave compatible with DSD?
Yes, it supports DSD64 and DSD128 via DoP (DSD over PCM) on USB. Ensure your player software is configured for DoP.
User questions about Dave Chord
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Dave - Chord and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Dave by Chord.
USER MANUAL Dave Chord
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chord
Model : Dave
Category : Receiver