709 - Multimeter FLUKE - Free user manual and instructions
Find the device manual for free 709 FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Precision mA Loop Calibrator / Multimeter |
| Brand | Fluke |
| Model | 709 |
| Category | Multimeter / Calibrator |
| Dimensions (H x W x D) | Approx. 150 x 80 x 40 mm |
| Weight | Approx. 340 g (with batteries) |
| Power Supply | 4 AA batteries (1.5 V each) |
| Battery Life | Typically 40 hours continuous use |
| Measurement Functions | DC mA measurement (0-24 mA), DC Voltage measurement (0-30 V) |
| Source Functions | DC mA source (0-24 mA), Loop power (24 V internal supply) |
| Accuracy (mA) | ±(0.01% of reading + 2 µA) |
| Resolution (mA) | 0.001 mA (1 µA) |
| Update Rate | 3 readings per second |
| Display | LCD, 5-digit, with backlight |
| Safety Rating | EN 61010-1, CAT III 30 V |
| Operating Temperature | -10 °C to 55 °C |
| Storage Temperature | -20 °C to 60 °C |
| Humidity | 0% to 90% non-condensing |
| Included Accessories | Test leads, alligator clips, 4 AA batteries, user manual |
| Warranty | 3 years |
| Maintenance | Clean with damp cloth; calibrate annually |
| Repairability | Authorized service centers; replaceable fuses |
Frequently Asked Questions - 709 FLUKE
How do I measure a 4-20 mA loop with the Fluke 709?
Turn the rotary switch to mA MEASURE position. Connect the test leads in series with the loop. Read the mA value on the display.
How do I source a specific mA value?
Set the rotary switch to mA SOURCE position. Use the arrow buttons to adjust the output. Press ENTER to confirm.
What does the 24V loop power function do?
The 24V loop power function provides a 24 VDC supply to power a transmitter while measuring its output. Press LOOP POWER button to enable.
How long do the batteries last?
With typical use, four AA batteries last approximately 40 hours. The display shows a low battery indicator when needed.
How do I replace the batteries?
Turn off the calibrator. Remove the battery cover on the back. Replace the four AA batteries, observing polarity. Reattach the cover.
What is the accuracy of the Fluke 709?
The DC mA measurement accuracy is ±(0.01% of reading + 2 µA) at 23°C ±5°C. For sourcing, similar accuracy applies.
Can I measure voltage with the Fluke 709?
Yes, select the V MEASURE function. The range is 0-30 VDC. Accuracy is ±(0.01% of reading + 2 mV).
How do I perform a calibration?
Calibration should be done annually by a qualified technician. Refer to the full user manual for procedure or contact Fluke service.
What does the backlight do?
Press the BACKLIGHT button to illuminate the display for low-light conditions. The backlight turns off automatically to save battery.
Is the Fluke 709 safe for industrial use?
Yes, it is rated CAT III 30 V and complies with EN 61010-1. Use only with Fluke-approved accessories.
User questions about 709 FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual 709 - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 709 by FLUKE.
USER MANUAL 709 FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : 709
Category : Multimeter