Air Response WK16000 - Air purifier Oreck - Free user manual and instructions
Find the device manual for free Air Response WK16000 Oreck in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Air purifier |
| Brand | Oreck |
| Model | Air Response WK16000 |
| Dimensions (L x W x H) | 30 x 20 x 45 cm |
| Weight | 5 kg |
| Power supply | 220-240 V, 50 Hz |
| Power consumption | 50 W |
| Filtration technology | Pre-filter + HEPA filter |
| Airflow | Up to 150 m³/h |
| Coverage area | Up to 30 m² |
| Speed levels | 3 speeds |
| Noise level | 25 - 50 dB |
| Ionizer function | No |
| Timer | No |
| Display | Filter change indicator light |
| Maintenance | Clean pre-filter monthly; replace HEPA filter every 6 to 12 months |
| Safety | Automatic shut-off in case of overheating |
| Spare parts | Replacement HEPA filter Oreck WK16000 |
| Warranty | 2 years |
| Included accessories | User manual |
Frequently Asked Questions - Air Response WK16000 Oreck
How to change the HEPA filter of the Oreck Air Response WK16000?
To change the filter, unplug the device, open the front panel, remove the old filter and insert a new replacement HEPA filter. Close the panel and plug it back in. Remember to reset the indicator light if present.
What is the maximum coverage area of the purifier?
The Oreck Air Response WK16000 is designed for rooms up to 30 m². For optimal efficiency, place it in a room of suitable size and close doors and windows.
Is the device noisy?
The noise level ranges from 25 dB at minimum speed to 50 dB at maximum speed. At low speed, it is quiet and suitable for nighttime use.
How to clean the pre-filter?
The pre-filter should be cleaned monthly using a vacuum cleaner or by rinsing with lukewarm water. Let it dry completely before putting it back.
Can I leave the purifier on continuously?
Yes, the Oreck Air Response WK16000 is designed for continuous use. It has automatic shut-off in case of overheating, ensuring optimal safety.
What does the red indicator light mean?
The red indicator light indicates that the HEPA filter needs to be replaced. Consult the manual for the reset procedure after changing the filter.
What is the power consumption of the device?
The purifier consumes about 50 W during operation, which is economical. In standby, consumption is negligible.
Is the HEPA filter washable?
No, the HEPA filter is not washable. It must be replaced every 6 to 12 months depending on use. The pre-filter is washable.
How to reset the filter change indicator?
After replacing the filter, plug in the device, press the Reset button (or hold the Power button for 3 seconds depending on the model). The indicator turns off.
Where to buy replacement filters for the Oreck WK16000?
Replacement filters are available on the official Oreck website, from authorized resellers, or on online platforms. Search for the reference HEPA filter Oreck WK16000.
User questions about Air Response WK16000 Oreck
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual Air Response WK16000 - Oreck and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Air Response WK16000 by Oreck.
USER MANUAL Air Response WK16000 Oreck
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Oreck
Model : Air Response WK16000
Category : Air purifier