SAC MT7013C - Air-conditioner SENCOR - Free user manual and instructions
Find the device manual for free SAC MT7013C SENCOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Sencor |
| Model | SAC MT7013C |
| Cooling Capacity | 7000 BTU/h (approx.) |
| Power Consumption (Cooling) | 680 W |
| Air Flow | 280 m³/h |
| Noise Level | ≤ 65 dB(A) |
| Dimensions (W x D x H) | 350 x 310 x 700 mm |
| Weight | 24 kg |
| Refrigerant | R290 / Propane (approx.) |
| Power Supply | 220-240 V ~ 50 Hz |
| Timer | 24-hour programmable |
| Remote Control | Included (batteries not included) |
| Modes | Cool, Fan, Dry (Dehumidifier) |
| Filter Type | Washable mesh filter |
| Drainage Method | Self-evaporating / Manual drain for high humidity |
| Auto Restart | Yes (after power failure) |
| Sleep Mode | Yes |
| Energy Class | A (approx.) |
| Warranty | 2 years (EU standard) |
| Included Accessories | Exhaust hose, window kit, remote control, manual |
Frequently Asked Questions - SAC MT7013C SENCOR
How often should I clean the air filter?
Clean the washable mesh filter every two weeks under normal use. More frequent cleaning may be needed in dusty environments.
How do I set the timer?
Press the Timer button on the remote or control panel. Use the +/- buttons to set the desired hours (1-24). The unit will start or stop accordingly.
What does error code E1 mean?
Error code E1 indicates a room temperature sensor failure. Turn off the unit, wait 10 minutes, and restart. If the error persists, contact service.
Do I need to drain the water manually?
In most conditions, the unit is self-evaporating. However, in high humidity, water may accumulate. Drain via the bottom plug or connect a continuous drain hose.
Why is the remote control not working?
Check if batteries are installed correctly and replace if needed. Ensure there are no obstacles between the remote and the unit. Point the remote directly at the receiver.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must be vented outside for proper cooling. Operating without it will reduce efficiency and may cause overheating.
How much electricity does this unit consume?
The power consumption is approximately 680 W in cooling mode. Actual consumption varies with settings and conditions.
What is the recommended room size?
This unit is suitable for rooms up to about 20 m² (215 ft²) with normal ceiling height.
How do I switch between cooling and fan mode?
Press the Mode button repeatedly to cycle through Cool, Fan, and Dry modes. The selected mode will be indicated on the display.
What should I do if the unit leaks water?
Check if the unit is level. Ensure the drain plug is properly sealed. Clean the filter and check the drain pan for cracks. If leaking continues, contact service.
User questions about SAC MT7013C SENCOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual SAC MT7013C - SENCOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAC MT7013C by SENCOR.
USER MANUAL SAC MT7013C SENCOR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SENCOR
Model : SAC MT7013C
Category : Air-conditioner