SENCOR SAC MT1603C - Air-conditioner

SAC MT1603C - Air-conditioner SENCOR - Free user manual and instructions

Find the device manual for free SAC MT1603C SENCOR in PDF.

📄 21 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SENCOR SAC MT1603C - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Air Conditioner
Model SAC MT1603C
Brand Sencor
Cooling Capacity 12000 BTU/h
Power Supply 220-240 V, 50 Hz
Power Consumption (Cooling) 1200 W
Dimensions (W x D x H) 45 x 38 x 75 cm
Weight 28 kg
Refrigerant R410A
Noise Level 55 dB(A)
Airflow 350 m³/h
Dehumidification 1.5 L/h
Energy Efficiency Ratio (EER) 2.6
Operating Modes Cool, Fan, Dry, Auto
Fan Speeds 3 (Low, Medium, High)
Timer 24-hour programmable
Remote Control Yes, included
Filter Type Washable dust filter
Maintenance Clean filter every 2 weeks; drain condensate regularly
Safety Features Overheat protection, auto restart after power failure
Accessories Included Exhaust hose, window adapter, remote control

Frequently Asked Questions - SAC MT1603C SENCOR

How do I install the exhaust hose?
Connect the hose to the back of the unit and attach the window adapter to the other end. Extend the hose to fit your window opening and secure it with the provided seals.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must always be attached to expel hot air. Operating without it can damage the unit and reduce cooling efficiency.
How often should I clean the filter?
Clean the washable dust filter every two weeks during normal use. More frequent cleaning may be needed in dusty environments.
What does the 'Dry' mode do?
Dry mode reduces humidity in the room without strong cooling. It's useful during damp conditions to make the air feel more comfortable.
Why is the unit collecting water?
The unit dehumidifies as it cools, collecting condensate. In high humidity, you may need to drain the water tank or connect a continuous drain hose.
How do I set the timer?
Press the Timer button on the remote or control panel. Use + or - to set the desired hours (1-24). The unit will start or stop after that time.
What should I do if the unit doesn't cool?
Check if the filter is clean, the exhaust hose is properly connected, and the set temperature is lower than room temperature. Also ensure the window adapter is sealed.
Can I use an extension cord?
It's not recommended. Plug the air conditioner directly into a grounded wall outlet to avoid voltage drops and potential fire hazards.
How do I store the unit after season?
Drain all water, clean the filter, and dry the interior. Store in a dry place. Cover the unit to protect from dust.
What is the power consumption?
The unit consumes approximately 1200 W in cooling mode at full load. Check the energy label for exact values.

User questions about SAC MT1603C SENCOR

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air-conditioner in PDF format for free! Find your manual SAC MT1603C - SENCOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAC MT1603C by SENCOR.

USER MANUAL SAC MT1603C SENCOR

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SENCOR

Model : SAC MT1603C

Category : Air-conditioner