Phonos - Turntable SPL - Free user manual and instructions
Find the device manual for free Phonos SPL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Turntable |
| Brand | SPL |
| Model | Phonos |
| Dimensions (W x D x H) | 420 x 360 x 120 mm |
| Weight | 4.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 10 W |
| Motor Type | Belt drive |
| Speeds | 33 1/3, 45 RPM |
| Platter | Aluminum die-cast |
| Tonearm | S-shaped, static balanced |
| Cartridge Type | Moving Magnet (MM) |
| Output | RCA (phono level) |
| Wow and Flutter | < 0.1% |
| Signal-to-Noise Ratio | > 65 dB |
| Color | Black |
| Warranty | 1 year |
| Cleaning | Use a soft, dry cloth. Avoid liquids. |
| Safety | Keep away from moisture and heat sources. |
| Accessories Included | Power adapter, RCA cable, dust cover |
Frequently Asked Questions - Phonos SPL
How do I set up the SPL Phonos turntable?
Place the turntable on a stable, level surface. Remove the platter, belt, and tonearm packaging. Install the platter and belt, then connect the power adapter and RCA cables to your amplifier or receiver. Ensure the turntable is grounded using the ground wire if necessary.
How do I connect the turntable to my speakers?
The turntable outputs phono-level signal via RCA. Connect it to a phono input on your amplifier or receiver. If no phono input, use a separate phono preamp. Then connect the amplifier to speakers.
How do I adjust the tracking force?
Balance the tonearm first by setting the counterweight until the tonearm floats horizontally. Then rotate the counterweight to set recommended tracking force (typically 2-3g for included cartridge). Use a tracking force gauge for accuracy.
How do I replace the stylus?
Gently pull the old stylus forward and downward. Align the new stylus with the cartridge body and push it upward until it clicks into place. Avoid touching the stylus tip.
What should I do if there is no sound?
Check that the turntable is powered on and the RCA cables are securely connected. Ensure the amplifier is set to the correct input. Verify that the stylus is not damaged and the cartridge is properly mounted. Check if the phono preamp is needed or if your amplifier has a phono input.
How do I clean my records?
Use a carbon fiber brush or a microfiber cloth to gently remove dust before each play. For deeper cleaning, use a record cleaning solution and a soft cloth, wiping in circular motions. Avoid using household cleaners.
Why is the turntable not spinning?
Check that the power adapter is plugged in and the on/off switch is on. Ensure the belt is properly installed and not broken. If the motor does not respond, contact customer support.
How do I ground the turntable?
Connect the ground wire (usually a thin silver wire) from the turntable to the ground terminal on your amplifier or receiver. This reduces hum and interference. If your amplifier lacks a ground terminal, connect it to a metal screw on the chassis.
Can I use the turntable with a receiver that has no phono input?
Yes, you need an external phono preamp. Connect the turntable's RCA outputs to the preamp's inputs, then connect the preamp's outputs to an auxiliary input on your receiver.
How should I store the turntable when not in use?
Always cover the turntable with the dust cover to protect from dust. Store in a dry, cool place away from direct sunlight and heat sources. Remove the belt if storing for extended periods to prevent stretching.
User questions about Phonos SPL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual Phonos - SPL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Phonos by SPL.