MTP41S - Microphone Audio-Technica - Free user manual and instructions
Find the device manual for free MTP41S Audio-Technica in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Dynamic Microphone |
| Brand | Audio-Technica |
| Model | MTP41S |
| Polar Pattern | Cardioid |
| Frequency Response | 50 Hz - 15 kHz |
| Impedance | 600 Ω |
| Sensitivity | -54 dB (1V/Pa) |
| Connector | XLR 3-pin |
| Dimensions (Length) | 180 mm |
| Dimensions (Diameter) | 50 mm |
| Weight | 300 g |
| Power Requirement | None (passive) |
| Main Functions | Vocal performance, live sound, podcasting |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Keep away from liquids; do not disassemble |
| Spare Parts & Repairability | No user-serviceable parts; contact support |
| General Information | Professional dynamic microphone for speech and music |
Frequently Asked Questions - MTP41S Audio-Technica
How do I connect the MTP41S to a mixer?
Use a balanced XLR cable (male to female) to connect the microphone to a mixer's XLR input. Ensure phantom power is turned off if your mixer supplies it, as this microphone is dynamic and does not require phantom power.
What type of cable does this microphone use?
The MTP41S uses a standard 3-pin XLR cable. For best performance, use a balanced XLR cable of good quality.
How can I reduce feedback during live use?
Position the microphone close to your mouth (2-4 inches) and point the rear (logo side) away from speakers. Use a cardioid polar pattern to reject sound from the sides and rear. Adjust EQ to cut low frequencies if necessary.
Does the MTP41S require phantom power?
No, the MTP41S is a dynamic microphone and does not require phantom power. It will work with any standard XLR input that does not supply power (or with phantom power turned off).
What is the polar pattern of this microphone?
The MTP41S has a cardioid polar pattern, which picks up sound primarily from the front and rejects noise from the sides and rear. This is ideal for live vocals.
Can I use the MTP41S for recording instruments?
Yes, the MTP41S can be used for recording instruments such as guitar amplifiers, drums (as a close mic), or brass instruments. Place the microphone close to the sound source for best results.
How do I clean the microphone grille?
Unscrew the grille (if removable) and wash it with mild soap and water. Dry thoroughly before reattaching. For the body, wipe with a dry, soft cloth. Avoid using liquids directly on the microphone.
What is the frequency response of the MTP41S?
The frequency response is 50 Hz to 15 kHz, tailored for clear vocal reproduction with a slight presence boost for intelligibility.
Is the MTP41S suitable for outdoor use?
Yes, the dynamic design makes it rugged and less sensitive to wind noise than condenser microphones. A windscreen is recommended for outdoor use to reduce pop and wind noise.
The microphone is not producing sound. What should I check?
First, verify the XLR cable is fully inserted at both the microphone and mixer. Ensure the mixer channel is unmuted and the gain is turned up. Test with a different cable or mixer input to isolate the issue. If still not working, the microphone may need repair.
User questions about MTP41S Audio-Technica
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual MTP41S - Audio-Technica and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTP41S by Audio-Technica.
USER MANUAL MTP41S Audio-Technica
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audio-Technica
Model : MTP41S
Category : Microphone