ATM350a - Microphone Audio-Technica - Free user manual and instructions
Find the device manual for free ATM350a Audio-Technica in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Clip-on Condenser Microphone |
| Brand | Audio-Technica |
| Model | ATM350a |
| Dimensions | 41.2 mm (length) × 8.6 mm (diameter) |
| Weight | 18.6 g (without cable) |
| Power Requirement | Phantom power 11–52 V DC |
| Frequency Response | 40–20,000 Hz |
| Polar Pattern | Cardioid |
| Output Impedance | 100 Ω |
| Sensitivity | −45 dB (re 1V/Pa) |
| Signal-to-Noise Ratio | 68 dB (1 kHz, 1 Pa) |
| Dynamic Range | 110 dB |
| Maximum Input Sound Level | 137 dB SPL (1 kHz, 1% THD) |
| Connector Type | 3-pin XLRM |
| Cable Length | 1.4 m (5 ft) permanently attached |
| Accessories Included | AT8456a mounting clip, windscreen, stand clamp, carrying case |
| Cleaning Instructions | Wipe with a soft, damp cloth; avoid solvents |
| Safety Precautions | Keep away from moisture, extreme temperatures, and strong magnetic fields |
| Spare Parts Availability | Replacement windscreens, clips, and cables available |
| Warranty | 2 years limited (check local regulations) |
| Country of Origin | China |
Frequently Asked Questions - ATM350a Audio-Technica
What type of phantom power does the ATM350a need?
The ATM350a requires 11–52 V DC phantom power, typically supplied by mixers or audio interfaces.
Can I use the ATM350a without phantom power?
No, it is a condenser microphone and must be powered by phantom power. It will not work with batteries nor plug-in power.
What instruments is the ATM350a suitable for?
It is designed for brass, woodwinds, percussion, and other instruments. The cardioid pattern isolates the source.
How do I clean the microphone?
Gently wipe the grille with a soft, slightly damp cloth. Use a dry cloth for the body. Avoid liquids entering the capsule.
Does the ATM350a include a windscreen?
Yes, it comes with a windscreen to reduce plosives and wind noise.
What is the cable length and connector?
The cable is 1.4 m (5 ft) permanently attached with a 3-pin XLRM connector.
Can I replace the cable?
The cable is fixed but can be repaired by a qualified technician. Audio-Technica offers replacement parts.
How do I mount the ATM350a?
Use the included AT8456a mounting clip to attach it to instrument bells or stands. Rotate the clip for optimal positioning.
Is the frequency response flat?
It has a slightly rising high-frequency response for clarity, with a gentle roll-off below 100 Hz.
What is the maximum SPL before distortion?
The microphone can handle up to 137 dB SPL (1% THD) before noticeable distortion.
User questions about ATM350a Audio-Technica
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual ATM350a - Audio-Technica and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATM350a by Audio-Technica.
USER MANUAL ATM350a Audio-Technica
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audio-Technica
Model : ATM350a
Category : Microphone