METRALINE DM 62 - Multimeter Gossen Metrawatt - Free user manual and instructions
Find the device manual for free METRALINE DM 62 Gossen Metrawatt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Digital Multimeter |
| Brand | Gossen Metrawatt |
| Model | METRALINE DM 62 |
| Category | Multimeter |
| Dimensions | Approximately 180 x 85 x 50 mm |
| Weight | Approximately 300 g (with battery) |
| Power Supply | 9V battery (IEC 6LR61) |
| Display | Digital LCD, 3¾ digits (max 4000 counts) |
| DC Voltage Range | 400 mV to 1000 V |
| AC Voltage Range | 400 mV to 750 V |
| DC Current Range | 400 µA to 10 A |
| Resistance Range | 400 Ω to 40 MΩ |
| Capacitance Measurement | Up to 4000 µF |
| Frequency Measurement | Up to 1 MHz |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Safety Rating | CAT III 600V, CAT II 1000V |
| Overload Protection | PTC resistor and fuse |
| Auto Power Off | Yes (approx. 30 minutes) |
| Data Hold | Yes |
| Relative Measurement | Yes |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Accessories Included | Test leads, 9V battery, manual |
Frequently Asked Questions - METRALINE DM 62 Gossen Metrawatt
How do I measure DC voltage with the METRALINE DM 62?
Set the rotary switch to the V DC position (usually marked with a solid V). Connect the black test lead to COM and red to V/Ω/Hz. Touch the probes to the circuit in parallel. Read the voltage on the display.
What is the maximum voltage I can measure?
The METRALINE DM 62 can measure up to 1000 V DC and 750 V AC (RMS). Do not exceed these limits to avoid damage or injury.
How do I replace the battery?
Turn off the multimeter and disconnect test leads. Remove the battery compartment screw on the back. Replace the 9V battery with a new one, ensuring correct polarity. Reattach the cover.
Why does the display show 'OL'?
'OL' stands for Overload. It means the measured value exceeds the selected range. Switch to a higher range to get a reading. If it still shows OL, the input may be too high for the meter.
How do I test continuity?
Set the rotary switch to the continuity/diode position (usually marked with a speaker symbol). Connect probes to the circuit. If resistance is below about 50 Ω, the buzzer sounds.
What are the safety precautions when using this multimeter?
Always use correct input jacks and range. Do not measure voltages above the rated CAT limits. Wear protective gear if working near live circuits. Inspect test leads for damage before use.
Can I measure current without breaking the circuit?
No, for current measurement you must connect the meter in series with the circuit. For AC current, use the clamp accessory if available, but the METRALINE DM 62 itself requires series connection.
How do I use the Data Hold function?
Press the HOLD button (usually labeled 'H') to freeze the current reading on the display. Press again to release hold. This is useful for capturing readings in hard-to-see locations.
What fuse does the meter use for current measurement?
The METRALINE DM 62 uses a fast-blow fuse, typically 10 A (600 V) for the 10 A input and a smaller fuse (e.g., 500 mA) for the mA/µA input. Check the exact rating in the manual.
How do I clean the multimeter?
Use a soft, damp cloth with mild detergent. Do not use solvents or abrasive cleaners. Ensure the meter is off and dry before storage. Clean the input jacks with a cotton swab if necessary.
User questions about METRALINE DM 62 Gossen Metrawatt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual METRALINE DM 62 - Gossen Metrawatt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. METRALINE DM 62 by Gossen Metrawatt.
USER MANUAL METRALINE DM 62 Gossen Metrawatt
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Gossen Metrawatt
Model : METRALINE DM 62
Category : Multimeter