291PF - Air Conditioning SVAN - Free user manual and instructions
Find the device manual for free 291PF SVAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | SVAN |
| Model | 291PF |
| Cooling Capacity | 12000 BTU/h |
| Heating Capacity | 12000 BTU/h (heat pump) |
| Energy Efficiency Ratio (EER) | 3.0 (approx.) |
| Power Supply | 220-240V ~ 50Hz |
| Rated Power Input (Cooling) | 1100 W |
| Refrigerant | R410A |
| Dimensions (W x D x H) | 450 x 380 x 750 mm |
| Net Weight | 28 kg |
| Noise Level (Low/High) | 50/55 dB(A) |
| Airflow Volume | 400 m³/h |
| Dehumidification Rate | 1.5 L/h |
| Timer Function | Yes, 24-hour |
| Remote Control | Yes, included |
| Castors for Mobility | Yes |
| Exhaust Hose Length | 1.5 m |
| Window Kit Included | Yes |
| Air Filter Type | Washable mesh filter |
| Operating Temperature Range | 16°C - 30°C |
| Certifications | CE, RoHS |
| Warranty | 2 years |
Frequently Asked Questions - 291PF SVAN
How do I install the SVAN 291PF air conditioner?
Installation typically involves attaching the exhaust hose to the unit and the window kit, then sliding the window kit into the window opening. Ensure the hose is properly sealed to prevent hot air from re-entering. Refer to the manual for detailed step-by-step instructions.
What is the cooling capacity of the SVAN 291PF?
The SVAN 291PF has a cooling capacity of 12000 BTU/h, suitable for rooms up to approximately 30-40 square meters.
How do I clean the air filter?
Turn off and unplug the unit. Open the front panel to access the filter. Remove the filter and wash it with lukewarm water and mild detergent. Allow it to dry completely before reinstalling. Clean every two weeks for optimal performance.
Can the SVAN 291PF be used as a heater?
Yes, this model is a heat pump unit and can provide heating. It has a heating capacity of 12000 BTU/h. Use the remote to switch between cooling and heating modes.
Why is my air conditioner not cooling?
Check if the air filter is dirty, if the exhaust hose is blocked or kinked, if the window kit is properly sealed, or if the set temperature is higher than the room temperature. Also ensure the unit is in cool mode and the compressor is running.
How do I use the timer function?
Press the Timer button on the remote control. Use the + or - buttons to set the desired hours. The unit will automatically turn on or off after the set time depending on the current state.
What does the error code E1 mean?
Error code E1 usually indicates a room temperature sensor failure. Contact customer support for assistance. You can try resetting the unit by unplugging it for 5 minutes.
How often should I empty the water tank?
In cooling mode, the unit self-evaporates water, so draining is rarely needed. In dehumidifying mode, the water tank fills faster. Check the water level indicator; when full, empty the tank via the drain plug.
Can I use an extension cord with this air conditioner?
It is not recommended due to fire risk. Always plug the unit directly into a grounded wall outlet. If necessary, use a heavy-duty extension cord rated for at least 15 amps and as short as possible.
How do I obtain replacement parts or service?
Contact SVAN customer support or an authorized service center. Have your model number and serial number ready. Spare parts such as filters, remote controls, and hoses are available through the manufacturer or third-party suppliers.
User questions about 291PF SVAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual 291PF - SVAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 291PF by SVAN.
USER MANUAL 291PF SVAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SVAN
Model : 291PF
Category : Air Conditioning