ZX1200Xi+ - Printer Godex - Free user manual and instructions
Find the device manual for free ZX1200Xi+ Godex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Barcode Label Printer |
| Model | Godex ZX1200Xi+ |
| Print Method | Thermal Transfer / Direct Thermal |
| Print Resolution | 203 dpi (8 dots/mm) standard; optional 300 dpi |
| Print Speed | Up to 10 inches per second (ips) |
| Max Print Width | 4.25 inches (108 mm) |
| Dimensions (W x D x H) | 500 mm x 300 mm x 310 mm |
| Weight | 15 kg (33 lbs) |
| Power Supply | 100-240 VAC, 50/60 Hz, auto-switching |
| Power Consumption | Operating: 150W; Standby: 10W |
| Interfaces | USB 2.0, Ethernet (10/100), RS-232 Serial, USB Host |
| Media Support | Roll-fed labels, fanfold, continuous; max roll diameter 203 mm |
| Ribbon Capacity | Max 450 m length, standard 30 mm core |
| Memory | 16 MB Flash, 32 MB SDRAM; optional SD card slot |
| Display | 2-line LCD with backlight and control buttons |
| Main Functions | Label printing, barcode generation, tag creation, on-site calibration |
| Maintenance | Clean print head with isopropyl alcohol; replace ribbon and labels; periodic roller cleaning |
| Safety Features | Overheat protection, auto-shutdown on prolonged inactivity, covered mechanisms |
| Spare Parts & Repairability | Replacement print head, platen roller, cutter assembly, power supply; user-replaceable parts |
| General Information | Compatible with Windows, macOS, Linux; supports ZPL, EPL, and Godex commands |
Frequently Asked Questions - ZX1200Xi+ Godex
How do I install the drivers for the ZX1200Xi+?
Download the latest drivers from the Godex support website. Run the installer and connect the printer via USB or Ethernet when prompted.
What label types are compatible with this printer?
The printer supports roll-fed labels, fanfold, and continuous media. Use thermal transfer labels with ribbon or direct thermal labels without ribbon.
How do I clean the print head?
Turn off the printer, open the top cover, and gently wipe the print head with a lint-free swab moistened with isopropyl alcohol. Allow to dry before closing.
Why is my printer printing blank labels?
Check that the ribbon is installed correctly (if using thermal transfer) and that the label roll is loaded with the printing side up. Also ensure the print head is clean.
How do I set up the printer on a network?
Connect the Ethernet cable, then configure the IP address via the printer's menu or using the Godex tool. Ensure the network is set to DHCP or static as needed.
What is the maximum print speed?
The maximum print speed is 10 ips (inches per second) at 203 dpi resolution. Speed may vary based on label size and complexity.
Can I print on synthetic materials?
Yes, the printer can handle synthetic labels such as polyester, polypropylene, and vinyl with appropriate ribbon selection.
How do I replace the cutter blade?
Turn off the printer, remove the cutter assembly cover, carefully unscrew the old blade, and install the replacement blade in the same orientation. Tighten securely.
What barcode symbologies are supported?
The printer supports 1D barcodes like Code 39, Code 128, UPC, EAN, and 2D barcodes like QR Code, Data Matrix, and PDF417.
How do I perform a factory reset?
Press and hold the FEED + PAUSE buttons while powering on the printer. Release when the LCD shows 'Factory Reset'. Confirm with the FEED button.
User questions about ZX1200Xi+ Godex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual ZX1200Xi+ - Godex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZX1200Xi+ by Godex.
USER MANUAL ZX1200Xi+ Godex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Godex
Model : ZX1200Xi+
Category : Printer