EDR1RXD1 - Fridge WHIRLPOOL - Free user manual and instructions
Find the device manual for free EDR1RXD1 WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Whirlpool |
| Model | EDR1RXD1 |
| Product Type | Refrigerator Water Filter |
| Compatible Models | Whirlpool, KitchenAid, Maytag, Amana refrigerators (various models) |
| Filtration Capacity | 200 gallons (757 liters) |
| Flow Rate | 0.5 gpm (1.9 lpm) |
| Micron Rating | 0.5 microns |
| Temperature Range | 33°F - 100°F (0.6°C - 37.8°C) |
| Pressure Range | 20 - 120 psi (138 - 827 kPa) |
| Dimensions (W x D x H) | 2.5 x 2.5 x 9.8 inches |
| Weight | 0.3 lbs (0.14 kg) |
| Material | Food-grade plastic, activated carbon block |
| Certifications | NSF/ANSI 42, Standard 53 |
| Replacement Frequency | Every 6 months or 200 gallons |
| Installation Type | Twist-on/off, no tools required |
| Contaminants Reduced | Chlorine taste and odor, sediment, lead, mercury, cysts |
| Maintenance | Replace filter cartridge as recommended; no cleaning required |
| Safety Notes | Do not use with microbiologically unsafe water without adequate disinfection |
| Warranty | 1 year limited manufacturer warranty |
| Spare Parts Availability | Available through authorized retailers and online |
Frequently Asked Questions - EDR1RXD1 WHIRLPOOL
How often should I replace the EDR1RXD1 water filter?
It is recommended to replace the filter every 6 months or after filtering 200 gallons of water, whichever comes first.
Which refrigerators are compatible with the Whirlpool EDR1RXD1 filter?
This filter is compatible with many Whirlpool, KitchenAid, Maytag, and Amana refrigerators. Check your model number against the compatibility list in the manual.
How do I install the EDR1RXD1 filter?
Installation is simple: turn the old filter counterclockwise to remove, then insert the new filter and turn clockwise until it locks. Run 2-3 gallons of water to flush.
What contaminants does the EDR1RXD1 remove?
The filter reduces chlorine taste and odor, sediment, lead, mercury, and cysts, certified by NSF/ANSI standards 42 and 53.
Can I use this filter with well water?
The filter is not designed for microbiologically unsafe water. If you have well water, ensure it is tested and disinfected before use.
What is the flow rate of the EDR1RXD1?
The flow rate is approximately 0.5 gallons per minute (1.9 liters per minute).
Where can I purchase a replacement EDR1RXD1 filter?
Replacement filters are available at major retailers like Home Depot, Lowe's, Best Buy, and online at Amazon or Whirlpool's official website.
How do I know when to replace the filter?
Many refrigerators have a filter indicator light. If not, mark your calendar for 6 months from installation or when water flow/taste degrades.
Is the EDR1RXD1 filter reusable?
No, the filter is a disposable cartridge and cannot be cleaned or reused. Replace with a new one.
Does the filter require any special tools for installation?
No, the filter installs by hand with a simple twist-on/twist-off mechanism. No tools needed.
User questions about EDR1RXD1 WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual EDR1RXD1 - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EDR1RXD1 by WHIRLPOOL.
USER MANUAL EDR1RXD1 WHIRLPOOL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WHIRLPOOL
Model : EDR1RXD1
Category : Fridge