EN104TP - Network switch NETGEAR - Free user manual and instructions
Find the device manual for free EN104TP NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch (4-port 10BASE-T Ethernet) |
| Ports | 4 x RJ-45 10BASE-T (Half/Full Duplex) |
| Speed | 10 Mbps per port |
| Standards | IEEE 802.3 10BASE-T, IEEE 802.3u (Auto-negotiation) |
| LED Indicators | Power, Link/Activity per port |
| Dimensions (W x D x H) | 175 x 115 x 35 mm |
| Weight | 0.45 kg |
| Power Supply | External AC adapter, 12V DC 1A |
| Power Consumption | 5W (max) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Installation | Desktop placement; no rack-mount included |
| Maintenance | Keep device clean and dry, ensure ventilation, avoid dust |
| Safety | Do not expose to water or excessive heat; unplug during storms |
| Spare Parts & Repairability | No user-serviceable parts; contact Netgear support for replacement power adapter |
| General Information | Designed for small office/home office; plug-and-play, no configuration needed |
Frequently Asked Questions - EN104TP NETGEAR
How do I connect the EN104TP to my network?
Connect one end of an Ethernet cable to any of the 4 RJ-45 ports on the switch and the other end to your computer or router. Power on the switch using the included adapter. The Link/Activity LEDs should light up when a connection is established.
The switch is not powering on. What should I do?
Check that the power adapter is securely connected to the switch and to a working electrical outlet. Try a different outlet. If the LED still does not illuminate, the adapter may be faulty; contact Netgear support for a replacement.
Why is the Link LED not lighting up?
Ensure the Ethernet cable is properly inserted at both ends. Try a different cable or port. The connected device must support 10BASE-T. If the device is a computer, verify that the network adapter is enabled.
Can I use this switch to connect devices with 100Mbps or Gigabit speeds?
The EN104TP is a 10 Mbps switch only. Connecting 100Mbps or Gigabit devices will force them to operate at 10 Mbps. For higher speeds, consider a Fast Ethernet or Gigabit switch.
Is the EN104TP a hub or a switch?
The EN104TP is a switch, meaning it forwards data only to the specific port of the destination device, improving network efficiency compared to a hub.
Can I mount this switch on a wall?
The EN104TP is designed for desktop placement and does not include mounting hardware. If needed, you can place it on a flat surface or use adhesive pads (not included) to secure it.
How many devices can I connect?
You can connect up to 4 devices directly using the RJ-45 ports. To expand, connect the switch to another switch or hub via any port.
Does the switch support Auto MDI/MDIX?
No, the EN104TP requires a straight-through cable for connecting to computers and a crossover cable for connecting to another switch unless the other device has Auto MDI/MDIX.
What do the LEDs indicate?
The Power LED is solid when the switch is powered. Each port has a Link/Activity LED: solid when a link is established, blinking when data is transmitted/received.
Is the switch plug-and-play?
Yes, the EN104TP requires no configuration. Simply connect power and Ethernet cables, and it works immediately.
User questions about EN104TP NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual EN104TP - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EN104TP by NETGEAR.
USER MANUAL EN104TP NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : EN104TP
Category : Network switch