HCP-6320 - Surveillance Camera Hanwha - Free user manual and instructions
Find the device manual for free HCP-6320 Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Resolution | 2 Megapixels (1920 x 1080) |
| Lens | 3.6mm fixed |
| Night Vision | Infrared LEDs up to 30m |
| Ingress Protection | IP67 |
| Power Supply | PoE (802.3af) |
| Dimensions | 150 x 70 x 70 mm |
| Weight | 0.5 kg |
| Video Compression | H.265, H.264 |
| Field of View | Horizontal: 90° |
| Motion Detection | Yes |
| Day/Night Switching | Auto (ICR) |
| ONVIF Compliance | Yes (Profile G) |
| Max Frame Rate | 30 fps at 1080p |
| Storage | MicroSD slot (up to 128GB) |
| Audio | Built-in microphone (optional) |
| Operating Temperature | -20°C to 50°C |
| Mounting | Wall bracket included |
| Maintenance | Clean lens with soft cloth; avoid solvents |
| Security | Password protection, HTTPS, IP filtering |
| Spare Parts | Available through authorized dealers |
| Repairability | Serviceable by certified technicians |
| General Information | Designed for indoor/outdoor surveillance |
Frequently Asked Questions - HCP-6320 Hanwha
How do I reset the Hanwha HCP-6320 to factory defaults?
Press and hold the reset button on the camera (usually a small pinhole) for 10 seconds using a paperclip. The camera will reboot with default settings.
What is the default IP address?
The default IP is 192.168.1.100. Ensure your computer is on the same subnet to access the web interface.
How can I view the camera remotely?
Set up port forwarding on your router for ports 8080 (HTTP) and 554 (RTSP). Alternatively, use Hanwha Wisenet SSM or the mobile app.
Does this camera support ONVIF?
Yes, the HCP-6320 is ONVIF Profile G compliant, allowing integration with third-party NVRs and software.
What should I do if the camera loses video signal?
Check Ethernet cable integrity, PoE power supply, and reboot the camera. If using long cables, ensure the total length does not exceed 100 meters.
How do I update the firmware?
Download the latest firmware from Hanwha Security website. Log into the camera web interface, go to System > Firmware Upgrade, and upload the .bin file.
Can I record directly to an SD card?
Yes, insert a microSD card (up to 128GB) into the slot. Configure recording in the Storage menu via the web interface.
Is the camera weatherproof?
Yes, it has an IP67 rating, meaning it is dust-tight and can withstand temporary immersion in water.
How do I adjust the field of view?
Loosen the screws on the mounting bracket, manually adjust the camera angle, then tighten the screws. The lens is fixed; use digital PTZ if needed.
What power supply does it require?
It supports Power over Ethernet (PoE IEEE 802.3af). Alternatively, use a 12V DC adapter (not included) if Ethernet is not available.
User questions about HCP-6320 Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual HCP-6320 - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HCP-6320 by Hanwha.
USER MANUAL HCP-6320 Hanwha
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanwha
Model : HCP-6320
Category : Surveillance Camera