QNP-6320H - Surveillance Camera Hanwha - Free user manual and instructions
Find the device manual for free QNP-6320H Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network PTZ Camera |
| Resolution | 2 Megapixels (1920 x 1080) |
| Optical Zoom | 30x (4.44~133.2mm) |
| Digital Zoom | 16x |
| IR Distance | Up to 150 m |
| Pan Range | 360° endless |
| Tilt Range | -15° to 90° |
| Video Compression | H.265, H.264, MJPEG |
| Power Supply | PoE+ (IEEE 802.3at, Class 4) or DC 24V |
| Power Consumption | Max 12.5 W (PoE+), 9.5 W (DC) |
| Dimensions (Ø x H) | 184 x 198 mm |
| Weight | Approx. 2.5 kg (without bracket) |
| Ingress Protection | IP66 (dust and water resistant) |
| Operating Temperature | -30°C to 55°C (-22°F to 131°F) |
| Storage | Micro SD slot (max 128 GB) |
| Audio | Built-in microphone and speaker |
| Intelligent Analytics | Motion detection, tampering, line crossing, intrusion, etc. |
| Maintenance | Clean dome with soft, dry cloth; do not use abrasive cleaners |
| Safety | Use supplied mounting bracket and screws; ensure proper grounding |
| Spare Parts & Reparability | Contact Hanwha support for replacement parts; user replaceable SD card |
| General Information | WiseNet III chipset; ONVIF Profile S/G/T supported; compatible with Hanwha NVRs |
Frequently Asked Questions - QNP-6320H Hanwha
How do I reset the QNP-6320H to factory defaults?
Press and hold the reset button on the camera body for 10 seconds using a paperclip. The camera will reboot with factory settings. Default IP is 192.168.1.100.
What is the default IP address and login?
Default IP address: 192.168.1.100. Default username/password: admin / admin (change immediately).
How can I access the camera remotely?
Connect the camera to your network via PoE+. Use Hanwha's Wisenet app (iOS/Android) or WebViewer software to discover the camera and configure remote access.
Is the QNP-6320H weatherproof?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against heavy rain and splashes. Suitable for outdoor installation.
What is the maximum SD card capacity?
The camera supports microSD cards up to 128 GB. Use Class 10 or higher for reliable recording.
Does the camera have audio capabilities?
Yes, it includes a built-in microphone and speaker for two-way audio communication.
How should I install the camera?
Mount the bracket securely to a wall or ceiling. Connect Ethernet cable with PoE+ or use DC 24V power adapter. Adjust pan/tilt/zoom via software. Refer to the manual for detailed steps.
What is the warranty period?
Hanwha typically offers a 3-year limited warranty. Check with your distributor or Hanwha support for exact terms.
Can I use this camera with a third-party NVR?
Yes, it supports ONVIF Profile S/G/T and RTSP streams. Ensure your NVR is ONVIF compliant for full functionality.
How to update the firmware?
Download the latest firmware from Hanwha's website. Log into the camera's web interface, go to Settings > System > Firmware Upgrade, upload the file, and follow prompts. Do not power off during update.
User questions about QNP-6320H Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual QNP-6320H - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QNP-6320H by Hanwha.
USER MANUAL QNP-6320H Hanwha
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanwha
Model : QNP-6320H
Category : Surveillance Camera