WM8050YTD - Washing machine VOX - Free user manual and instructions
Find the device manual for free WM8050YTD VOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Front-loading washing machine |
| Model | WM8050YTD |
| Brand | VOX |
| Capacity | 8 kg |
| Spin Speed | 1400 rpm |
| Energy Class | A+++ (A - G scale) |
| Washing Efficiency Class | A |
| Spin Drying Efficiency Class | B |
| Annual Energy Consumption | 176 kWh |
| Annual Water Consumption | 10520 L |
| Dimensions (H x W x D) | 85 cm x 60 cm x 55 cm |
| Weight | 65 kg |
| Noise Level (Wash/Spin) | 58 dB / 74 dB |
| Programs | Cotton, Synthetics, Delicates, Wool, Quick 30', Rinse & Spin, Spin Only, Drain |
| Additional Features | Delay Start, Child Lock, Partial Load Detection, Stain Option |
| Display | LED |
| Drum Material | Stainless steel |
| Water Level | Automatic |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Water Connection | Cold water only |
| Door Opening | Left hinge, 180° opening |
| Repairability Index | 7.5 / 10 (display, PCB, belt, door seal, pump available) |
| Included Accessories | Water inlet hose, drain hose, user manual, transit bolts |
Frequently Asked Questions - WM8050YTD VOX
How do I install the washing machine?
Remove all transit bolts before use. Connect the water inlet hose to a cold water tap with a 3/4-inch thread. Attach the drain hose to a standpipe or sink outlet. Level the machine using the adjustable feet. Ensure the electrical connection matches the rating plate (220-240 V, 10 A).
What should I do if the machine does not drain?
Check the drain hose for kinks or blockages. Clean the pump filter located at the bottom front panel. Make sure the drain hose is not higher than 100 cm from the floor. For persistent issues, consult the manual or contact service.
How do I clean the detergent drawer?
Remove the drawer by pressing the release lever. Rinse under warm water and use a soft brush to remove detergent residue. Clean the compartment with a damp cloth. Reinsert the drawer fully. Do this every 2-3 months.
What do error codes mean?
Common error codes: E01 (door not closed), E02 (water supply issue), E03 (drain problem), E04 (overflow), E05 (heater failure). Refer to the user manual for full list and troubleshooting steps.
Can I set a delayed start?
Yes, press the Delay Start button repeatedly to set a delay of 1-24 hours. Choose a program, then press Start/Pause. The machine will begin after the set delay.
How often should I clean the pump filter?
Clean the pump filter every 3 months or when you notice drainage issues. Unplug the machine, open the lower access panel, place a container, unscrew the filter, clean it, and reinstall.
What is the maximum spin speed?
The maximum spin speed is 1400 rpm. You can adjust it using the Spin Speed selector for different fabrics.
How do I activate child lock?
Press and hold the Child Lock button (usually marked with a padlock icon) for 3 seconds until the indicator lights up. To deactivate, repeat the same step.
What type of detergent should I use?
Use a low-suds detergent suitable for automatic washing machines. For front-loaders, use detergent marked 'HE' or 'for front load'. Follow the dosage instructions on the detergent package.
How do I transport the machine?
Reinstall the transit bolts (removed during installation) to secure the drum. Drain any water from hoses and pump filter. Tape the door and hoses. Keep the machine upright during transport.
User questions about WM8050YTD VOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WM8050YTD - VOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM8050YTD by VOX.