PRO Slim PAR-12 MK2 - Projector Futurelight - Free user manual and instructions
Find the device manual for free PRO Slim PAR-12 MK2 Futurelight in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Model | PRO Slim PAR-12 MK2 |
| Light Source | 12 x 8W RGBW LEDs |
| Beam Angle | 25° |
| DMX Channels | 4/6/8/12 channel modes |
| Control Protocol | DMX512 |
| Operating Modes | Auto, Sound Active, Master/Slave, DMX |
| Power Consumption | 100W max |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 280 x 200 x 100 mm |
| Weight | 2.5 kg |
| Housing Material | Aluminum die-cast |
| Cooling | Passive convection |
| IP Rating | IP20 (indoor only) |
| Mounting Options | Floor stand, truss clamp, hanging bracket |
| Connectors | 3-pin XLR in/out, PowerCon in/out |
| Display | 4-digit LED display with buttons |
| Strobe | 0-20 Hz adjustable |
| Dimmer | 0-100% linear |
| Color Mixing | RGBW additive mixing |
| Cleaning | Use a soft dry cloth; avoid solvents |
| Safety | Do not stare into beam; ensure ventilation; use safety cable |
| Spare Parts | LED modules, power supply, control board available |
| Repair | Contact authorized service center; do not open |
| Manual Download | PDF available at notice-facile.com |
Frequently Asked Questions - PRO Slim PAR-12 MK2 Futurelight
How do I connect the PRO Slim PAR-12 MK2 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX output of your controller to the DMX input of the fixture. Set the fixture's DMX address via the LED display. Refer to the manual for DMX channel mapping.
What are the available operating modes?
The fixture supports Auto (built-in programs), Sound Active (music via built-in mic), Master/Slave (synchronized multiple units), and DMX512 control.
How do I set the DMX address?
Press the Menu button to enter settings, use Up/Down to select DMX Address, press Enter, then adjust using Up/Down. Press Enter to confirm.
Can I use this fixture outdoors?
No, the PRO Slim PAR-12 MK2 has an IP20 rating, meaning it is only suitable for indoor use. Protect from moisture and dust.
How do I clean the fixture?
Disconnect power and allow to cool. Use a soft, dry cloth to gently wipe the housing and lens. Do not use abrasive cleaners or solvents.
What power connector does it use?
It uses a PowerCon connector (power input and output for daisy-chaining). The included cable is compatible with standard IEC mains.
How many DMX channels does it use?
The fixture offers multiple channel modes: 4 (RGBW), 6 (RGBW + dimmer + strobe), 8 (extended), and 12 (detailed control). Select via the menu.
Can I mount it on a truss?
Yes, it has a mounting bracket suitable for truss clamps. Always secure with a safety cable to prevent accidental falls.
What should I do if the fixture does not power on?
Check the power connection and ensure the mains voltage matches (100-240V). Inspect the fuse; if blown, replace with same type. If still not working, contact support.
How do I update the firmware?
Firmware updates are not user-serviceable. Contact Futurelight customer service for any firmware updates if needed.
User questions about PRO Slim PAR-12 MK2 Futurelight
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual PRO Slim PAR-12 MK2 - Futurelight and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO Slim PAR-12 MK2 by Futurelight.
USER MANUAL PRO Slim PAR-12 MK2 Futurelight
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Futurelight
Model : PRO Slim PAR-12 MK2
Category : Projector