FT-2600M - Talkie Walkie YAESU - Free user manual and instructions
Find the device manual for free FT-2600M YAESU in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | VHF FM Transceiver |
| Brand | Yaesu |
| Model | FT-2600M |
| Frequency Range | 144-148 MHz (VHF) |
| RF Power Output | 60 W (High) / 10 W (Low) |
| Number of Memory Channels | 200 |
| Power Supply Requirement | 13.8 V DC (±15%) |
| Current Consumption (TX) | Approx. 11 A (High) / 2 A (Low) |
| Dimensions (W x H x D) | 140 x 40 x 180 mm |
| Weight | 1.2 kg |
| Operating Temperature Range | -20°C to +60°C |
| Frequency Stability | ±2.5 ppm |
| Modulation Type | FM (F3E) |
| Antenna Impedance | 50 Ω (SO-239 connector) |
| CTCSS/DCS Encoder/Decoder | Built-in |
| Scanning Functions | Memory, Priority, Band scan |
| Audio Output Power (Internal Speaker) | 2 W |
| Maintenance | Clean with a dry cloth; avoid solvents. Keep connectors clean and dry. |
| Safety Precautions | Use only specified fuse (250V, 15A). Do not expose to water or excessive heat. |
| Spare Parts & Repairability | Contact authorized Yaesu service centers or dealers for genuine parts. |
Frequently Asked Questions - FT-2600M YAESU
How do I program a memory channel on the FT-2600M?
To program a memory channel, select the desired frequency, press the F key, then press the MR key. Use the tuning knob to choose a memory channel number, then press and hold MR to save. Refer to the manual for detailed programming steps.
What is the power output of the FT-2600M?
The FT-2600M delivers 60 watts on high power and 10 watts on low power in VHF band. Always ensure proper antenna load to avoid damage.
How do I set the squelch level?
Turn the SQUELCH knob clockwise to increase squelch threshold and counterclockwise to decrease. Adjust until background noise disappears while still receiving weak signals.
Can I connect an external speaker?
Yes, the FT-2600M has an external speaker jack (3.5 mm mono). Use a speaker with 8 Ω impedance and at least 2 W power handling for optimal audio.
How to perform a factory reset?
Press and hold the F key while turning the power on. The display will show 'RESET'. Turn the tuning knob to select 'ALL' or 'PARTIAL', then press MR to confirm. This erases all user settings.
What type of antenna connector does it use?
The FT-2600M uses a SO-239 (UHF female) connector, standard for VHF mobile antennas. Use a 50 Ω antenna for proper performance.
How do I activate CTCSS/DCS encoding?
Press the TONE key to cycle through tone modes: CTCSS encoder, CTCSS encoder+decoder, DCS encoder+decoder, or off. Use the menu to set specific tone frequencies.
What is the frequency range of the FT-2600M?
It covers the 144-148 MHz VHF amateur radio band, including the 2-meter band. It is not modifiable for out-of-band use.
How do I lock the keypad?
Press and hold the LOCK key (usually the F key) for 1 second to lock all keys except PTT and volume. Repeat to unlock.
Does the FT-2600M have a backlit display?
Yes, the display has a green LED backlight that can be set to always on or automatic. Adjust brightness via the menu (item 5).
User questions about FT-2600M YAESU
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Talkie Walkie in PDF format for free! Find your manual FT-2600M - YAESU and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FT-2600M by YAESU.
USER MANUAL FT-2600M YAESU
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : YAESU
Model : FT-2600M
Category : Talkie Walkie