BP302T - Grass trimmer Shindaiwa - Free user manual and instructions
Find the device manual for free BP302T Shindaiwa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Thermal grass trimmer |
| Brand | Shindaiwa |
| Model | BP302T |
| Engine | 2-stroke, single cylinder |
| Displacement | 30.2 cm³ |
| Power | 1.1 kW (1.5 hp) |
| Fuel | Mixed gasoline (50:1) |
| Fuel tank capacity | 0.6 L |
| Weight (without cutting attachment) | 5.3 kg |
| Total length | 1 800 mm |
| Cutting diameter | 430 mm (line) / 255 mm (blade) |
| Shaft type | Straight, with reduction gear |
| Ignition system | Electronic CDI |
| Idle speed | 3 000 rpm |
| Maximum speed | 11 000 rpm |
| Sound level (LWA) | 110 dB(A) |
| Vibration (left/right handle) | 8.2 / 6.5 m/s² |
| Included accessories | Line head (2.4 mm), 3-tooth blade, guard |
| Maintenance and cleaning | Clean air filter every 10 h, drain the tank before storage |
| Safety | Blade guard, engine stop, safety trigger |
| Spare parts and repairability | Air filter, spark plug, line head, blade available |
Frequently Asked Questions - BP302T Shindaiwa
What oil/gasoline mixture to use for the BP302T?
Use a 2% (50:1) mixture with unleaded gasoline 95 or 98 and a special Shindaiwa-approved 2-stroke oil.
How to start the engine cold?
Set the choke to the closed position, press the primer bulb 5 to 7 times, then pull the starter cord firmly. Once the engine is warm, open the choke.
What type of line to use?
Use a cutting line of 2.4 mm diameter with a maximum length of 8 meters. Shindaiwa line heads accept round or twisted lines.
How to adjust the carburetor?
Adjustment is done using the L and H screws. Turn the L screw to adjust idle, then the H screw for maximum speed. Use a tachometer for precise adjustment.
Why does my engine stall when accelerating?
This may be caused by a dirty air filter, a faulty spark plug, or a too lean mixture. Clean the filter, check the spark plug and adjust the carburetor H screw.
What is the spark plug replacement procedure?
Disconnect the spark plug wire, unscrew the old spark plug with a spark plug wrench. Screw in the new one to a torque of 20 Nm and reconnect the wire.
How to maintain the air filter?
Remove the filter cover, take out the foam element. Wash it with soapy water, dry it and lightly oil it. Reinstall it.
Can I use a blade instead of the line?
Yes, the BP302T accepts a 3-tooth blade of 255 mm. Remove the line head and mount the blade with the flange and nut. Tighten firmly.
Which oil to use for the mixture?
Use a high-quality synthetic 2-stroke engine oil, preferably Shindaiwa branded. Adhere to the 50:1 ratio.
How to store the unit in winter?
Empty the fuel tank, run the engine until it stops due to lack of fuel. Clean the unit, lubricate the cables and store it in a dry place.
User questions about BP302T Shindaiwa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grass trimmer in PDF format for free! Find your manual BP302T - Shindaiwa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BP302T by Shindaiwa.
USER MANUAL BP302T Shindaiwa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Shindaiwa
Model : BP302T
Category : Grass trimmer