W2NEI8P4ADS - Washing machine GORENJE - Free user manual and instructions

Product Type	Freestanding Washing Machine
Brand	Gorenje
Model	W2NEI8P4ADS
Capacity	8 kg
Maximum Spin Speed	1400 rpm
Energy Class	A (EU 2010/30/EC)
Washing Class	A
Spin Efficiency Class	B
Noise Level (Wash/Spin)	56 dB / 76 dB
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	75 kg
Power Supply	220-240 V, 50 Hz
Water Consumption per Cycle	55 L
Annual Energy Consumption	200 kWh
Number of Programs	16
Key Programs	Cotton, Synthetics, Delicates, Quick Wash, Eco, Wool, Hand Wash, Rinse & Spin, Spin Only
Additional Features	Delay Start, Child Lock, Load Sensor, Foam Control, Unbalance Detection
Drum Material	Stainless Steel
Control Type	Electronic, LED Display
Maintenance	Clean detergent drawer and filter regularly; descale periodically
Safety	Overflow protection, door lock during operation
Spare Parts Availability	Genuine parts available through authorized service centers
Reparability	Modular design for easy repair; service manual available

Frequently Asked Questions - W2NEI8P4ADS GORENJE

How do I install the Gorenje W2NEI8P4ADS washing machine?

Ensure the machine is on a level surface. Connect water inlet hose to cold water supply, and attach drain hose to a standpipe or sink. Plug into a grounded outlet. Refer to the installation manual for detailed steps.

What is the maximum laundry capacity?

The maximum dry laundry capacity is 8 kg. Do not overload to ensure efficient washing and avoid damage.

How do I select the right washing program?

Use the program selector knob to choose based on fabric type and soil level. Common programs include Cotton, Synthetics, Delicates, and Quick Wash. Refer to the program chart in the manual.

Can I delay the start of a wash?

Yes, you can use the Delay Start function to set the machine to finish at a later time. Press the Delay button and select the desired hours (up to 24).

How do I clean the detergent drawer?

Remove the drawer by pressing the release lever. Wash it under running water with a soft brush. Clean the drawer compartment with a damp cloth. Reinsert after drying. Perform this monthly.

What should I do if the machine vibrates excessively?

Check that the transport bolts are removed. Ensure the machine is level by adjusting the feet. Avoid overloading and unbalanced loads. Also verify the floor is sturdy.

How do I activate the child lock?

Press and hold the Child Lock button (usually marked with a padlock icon) for 3 seconds. A lock symbol appears on the display. Repeat to deactivate.

What is the energy efficiency rating?

The Gorenje W2NEI8P4ADS has an energy class of A under EU regulations. It consumes approximately 200 kWh per year based on standard programs.

How do I clean the pump filter?

Open the lower flap on the front. Place a towel under the pump cover. Turn the filter counterclockwise and pull out. Remove debris. Replace and tighten. Clean every 2-3 months.

Where can I find spare parts or service?

Contact the Gorenje authorized service centers or visit the official website. Genuine spare parts are available. Use only original parts to maintain safety and performance.

USER MANUAL W2NEI8P4ADS GORENJE

Life is complicated today. Let's make laundry care simple! Your new washing machine uses innovative technology and the latest achievements in laundry care to help you simplify your daily household chores.

The latest technology used in our washing machine ensures the gentlest care for each garment with minimum creasing. At the same time, your washing machine will be easy on the environment, owing to its highly efficient use of power, water, and detergent.

This washing machine is intended solely for household use. Please do not use it for any laundry labelled as not suitable for machine washing.

The following symbols are used throughout the manual and they have the following meanings:

INFORMATION!

Information, advice, tip, or recommendation

WARNING!

Warning - general danger

ELECTRIC SHOCK!

Warning - danger of electric shock

HOT SURFACE!

Warning - danger of hot surface

DANGER OF FIRE!

Warning - danger of fire

It is important that you carefully read the instructions.

Contents

SAFETY PRECAUTIONS 5

Child safety 8

Danger of hot surface 9

WASHING 10

Technical data 11

Compliance information 12

Control unit 13

Removing the blocking rods 15

Moving and transport after installation 16

Selecting the room 16

Adjusting the washing machine feet 17

Positioning the washing machine 18

Connection to water supply 20

Connecting to the power mains 23

WASHING PROCESS, STEP BY STEP (1-7) 27

Step 1: Heed the labels on the laundry 27

Step 2: Preparing the washing process 28

Program chart 32

Remote control of wash using the app 39

Step 4: Selecting extra functions .... 40

Step 5: Selecting additional functions .... 45

Extra function table 46

Step 6: Starting the washing programme .... 48

Step 7: End of the washing programme .... 48

Manual interruption 49

Personal settings 49

Personal settings menu 49

Pause button 49

Errors 50

Power supply failure 50

50 Opening 1

51 Display in

Cleaning the dispenser tray 52

Cleaning the pump filter 54

Cleaning the washing machine exterior 55

TROUBLE-SHOOTING 56

What to do ...? 56

Troubleshooting and error table 56

Service 62

RECOMMENDATIONS FOR WASHING AND ECONOMIC USE OF YOUR WASHING

MACHINE 64

Stain removal tips 67

Low standby mode 68

69 TYPICAL

LABEL 73

74PRODUC

DISPOSAL 76

Carefully read the instructions for use before using the washing machine.

Please, do not use the washing machine without reading and understanding these instructions or use first.

These instructions for use of a washing machine are supplied with different types or models of washing machines. Therefore, they may include descriptions of settings or equipment that are not available in your washing machine.

Failure to observe the instructions for use or inappropriate use of the washing machine may result in damage to the laundry or the appliance, or injury to the user. Keep the instruction manual handy, near the washing machine.

This appliance is intended to be used in household and similar applications, such as:

• staff kitchen areas in shops, offices and other working environments;
• farmhouses;
• by clients in hotels, motels and other residential type environments; • bed and breakfast type environments.

This appliance must not be used in:

- areas for communal use in blocks of flats or launderettes.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.

WARNING!

The washing machine may only be used with the supplied power cord.

ELECTRIC SHOCK!

To avoid danger, a damaged power cord may only be replaced by the manufacturer, a service technician, or an authorized person.

WARNING!

Do not connect the washing machine to power mains using an external switching device such as a programme timer, or connect it to power mains that is regularly switched on and off by the power supply provider.

Instructions for use are available on our website at www.gorenje.com.

Follow the instructions for correct installation of the Gorenje washing machine and connection to the water and power mains (see chapter »INSTALLATION AND CONNECTION«).

Connection to water and power supply has to be executed by an adequately trained technician expert.

Any repair and maintenance pertaining to safety or performance should be done by trained experts.

Do not install the washing machine in a room where the temperature can drop below 5°C, as washing machine parts may be damaged in case of water freezing.

The ventilation openings in the base of washing machine must not be obstructed by a carpet.

To connect the washing machine to water supply, make sure to use the supplied water supply hose and gaskets. Water pressure must be between 0.05 and 0.8 MPa (0.5–8 bar).

Always use a new water supply hose to connect the washing machine to water supply; do not reuse an old water supply hose.

The end of the water discharge hoses should reach into a water drain line.

Before the start of the washing cycle, press the door on the indicated spot until it locks into place. The door cannot be opened during washing machine operation.

We recommend removing any impurities from the washing machine drum before the first wash using the Cotton 90°C programme (see PROGRAMME TABLE).

After the washing cycle, close the water tap and pull out the washing machine plug from the power socket.

Only use the washing machine for washing laundry, as described in the instruction manual. The machine is not intended for dry cleaning.

No silver ions are released during the washing programme.

Only use agents for machine washing and care of laundry. We shall not be responsible for any damages or discolouration of gaskets and plastic parts resulting from incorrect use of bleaching or colouring agents.

When descaling, only use descaling agents with added anti-corrosion protection. (Only use non-corrosive descaling agents.) Follow the manufacturer's instructions. Finish the descaling process with several rinse cycles or by running the Drum clean (Self-cleaning programme) in order to remove any residual acid (e.g. vinegar etc.).

DANGER OF FIRE!

Do not use detergents that contain solvents as this could lead to release of poisonous gases, damage to the washing machine, and risk of fire and explosion.

Child safety

WARNING!

Children of less than 3 years should be kept away unless continuously supervised.

Children should be supervised to ensure that they do not play with the appliance.

Keep the detergent and conditioner out of reach of children.

Activate the child lock. See chapter »CHOOSING THE SETTINGS/Child lock«.

Before closing the washing machine door and running the programme, make sure there is nothing except laundry in the drum (e.g. if a child climbed into the washing machine drum and closed the door from the inside).

The washing machine is made in compliance with all relevant safety standards.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision.

Danger of hot surface

HOT SURFACE!

At higher washing temperatures, the door glass will heat up. Be careful to avoid burns. Make sure children do not play near the door glass.

WASHING MACHINE DESCRIPTION

2. Start/pause button 2. Power cord 4. On/off button 4. Adjustable feet 5. Detergent compartment 6. Door 7. Rating plate 8. Pump filter

BACK FRONT

1. Water supply hose 1. Control unit 3. Water discharge hose 3. Program selector knob

Technical data

(depending on the model)

Rating plate with basic information about the washing machine is located on the inner side of the washing machine door (see chapter »WASHING MACHINE DESCRIPTION«).

	SeeratingplateMaximumload
			600mm600mm600mm
			850mm850mm850mm
			610mm545mm465mm
			640mm577mm495mm
			1125mm1062mm980mm
	Xkg(dependingonthemodel)Washingmachineweiglt
	SeeratingplateRatedvoltage
	SeeratingplateNominalpower
	SeeratingplateConnection
	SeeratingplateWaterpressure
	SeeratingplateCurrent
	SeeratingplateFrequency
	SeeratingplateMaximumload

Rating plate

Link to the EU EPREL database

From 1 March 2021, information on energy labelling and ecodesign requirements is available in the EU EPREL product database.

The QR code on the energy label supplied with the appliance contains a web link through which you can find your registered appliance in the EU EPREL database.

Information regarding the performance of the product can also be found in the EU EPREL database, which is accessible via the link https://eprel.ec.europa.eu, where you have to enter the model and product number; both are indicated on the rating plate on the appliance. On the website www.theenergylabel.eu you can find more detailed information about the energy label.

Keep the energy label in case it is needed in the future, together with the user manual and other documents supplied with this appliance.

Compliance information

	HL3215STGRadioequipmenttypeHLW3215-TG(dependingonthemodel)HLW3215-TG01
Wi-Fi
	2.4000GHz-2.4835GHzOperatingfrequencyrange
	≤10dBm/MHz(EIRP)(Antennagain<10dBi)Maximumoutputpower
	Gain:0dBiMaximumantennagain
Bluetooth
	2.400GHz-2.4835GHzOperatingfrequencyrange
	6dBm(≤10dBm)Carrieroutput
	F1DEmissiontype

Declaration of conformity

The company declares that the device with the function Connect Life complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The detailed Declaration of Conformity can be found at the web address https://auid.connectlife.io on the page of your device among the additional documents.

Control unit

1	ON/OFFBUTTONUsethisbuttontoturnthewashingmachineonandoff,andtoresetthewashingprogramme.
	PROGRAMMESELECTORKNOB2
3	START/PAUSEBUTTONUsethisbuttontostartorpauseaprogramme.Uponstart-uporduringpause,thebuttonlightwillflash;whentheprogrammeisstarted andinprogress,itwillbelitcontinuously.
4	WASHINGTEMPERATURE °COptiontosetwashingtemperature
4+5	ON/OFFPREWASH/SUPERHYGIENEPressthepositions4+5andholdthemfor3seconds.
5	SPIN(SPINNINGRATEMAX/DRAIN/PUMPSTOP) Optiontosetthespinningrate.
5+6	ChildlockON/OFPressthepositions5+6andholdthemfor3seconds.
6	OPTIONS(EXTRAFUNCTIONS):ANTICREASE(CREASEPREVENTION)Optiontoactivatethegentlewashfunction.WATER+(EXTRAWATER)Optiontosetahigherwaterlevel.STEAM Optiontoactivatethelaundryrefreshfunction.
	SoundON/OFF6+7Pressthepositions6+7andholdthemfor3seconds.
7	FAST(FAST)Optiontosetashorterwashingprogrammetime.
8	DELAYEND(DELAYINGTHEENDOFTHEWASHINGPROGRAM)Optiontosetthetimeofwashingprogrammecompletion.
7+8	SWITCHINGON/OFFtheWi-Ficonnection Pressthepositions7+8.
9	SymbollightingANTICREASE(CREASEPREVENTION)
10	SymbollightingSTEAM
11	SymbollightingWATER+(EXTRAWATER)
12	LightingofthesymbolPREWASH(PREWASH/SUPERHYGIENE)
13	SymbollightingFAST(FASTWASH)
14	ThefollowingisdisplayedontheDISPLAYUNIT:•Availablefunctions;•Timeremainingtoprogrammecompletion;•Informationfortheuser.
15	LightingofthesymbolCONNECT(CONNECTION)
16	LightingoftheREMOTESTARTsymbol(REMOTESTART)

INFORMATION!

For models with spinning speeds higher than 1200 rpm, the inscription max will light up on the display.

For models with the highest spinning speed of 1200 rpm, the inscription max on the display will never light up.

INSTALLATION AND CONNECTION

INFORMATION!

Remove all packaging. When removing the packaging, make sure not to damage the dryer with a sharp object.

Removing the blocking rods

WARNING!

Before the first use of the appliance, the transport rod must be removed. A blocked washing machine may be damaged when it is switched on for the first time. Warranty shall be void in cases of such damage!

1. Move the hoses and undo the screws on the back of the washing machine. Remove the two angular pieces. 2. Slide the angular pieces onto the groove in the blocking rod; before doing so, rotate the right angular piece to the opposite side. 3. Use the angular pieces to rotate the blocking rods by 90° and pull them out. 4. Cover the two holes through which the blocking rods were inserted with plastic plugs, and redo the screws that you undid in step 1. The plastic plugs are supplied in the bag with the washing machine instruction manual.

Moving and transport after installation

INFORMATION!

If you wish to move the washing machine after it has been installed, the angular pieces and at least one blocking rod have to be re-installed to prevent vibration damage to the washing machine during transport (see chapter) INSTALLATION AND CONNECTION / Removing the blocking rods. If you lost the angular pieces and the blocking rods, they can be ordered from the manufacturer.

Selecting the room

INFORMATION!

The floor on which the washing machine is placed must have a concrete base. It should be clean and dry; otherwise, the washing machine may slide. Also, clean the bottom surface of adjustable feet.

INFORMATION!

The washing machine must stand level and stable on a solid base.

INFORMATION!

If the washing machine is placed on an elevated stable base, the washing machine has to be additionally secured against tipping.

Adjusting the washing machine feet

Use a water scale and spanner No. 32 (for feet) and No. 17 (for the nut). The spanners are not supplied.

1. Level the washing machine in longitudinal and transverse direction by rotating the adjustable feet.

2. After adjusting the height of the feet, firmly tighten the jam nuts (counternuts) using a spanner No. 17, by turning them towards the bottom of the washing machine (see figure).

INFORMATION!

Incorrect levelling of the washing machine with the adjustable legs may cause vibration, appliance sliding across the room, and loud operation. Incorrect levelling of the washing machine is not subject to warranty.

INFORMATION!

Sometimes, unusual or louder noise may appear during appliance operation; these are mostly the result of improper installation.

Positioning the washing machine

If you also have a Gorenje dryer of corresponding (same) dimensions, it can be placed on top of the Gorenje washing machine (in this case, vacuum feet must be used) or next to it (figures 1 and 3).

If your Gorenje washing machine is smaller (minimum depth 545 mm) than your Gorenje dryer, then the dryer support has to be purchased extra (figure 2). The supplied vacuum feet must be used; they are designed to prevent the dryer from slipping.

Additional equipment (dryer support (a), vacuum feet (b) and wall fixing bracket (c)) can be purchased at the service centre.

The surface on which the appliance is placed should be clean and level.

Gorenje washing machine onto which you intend to place the Gorenje dryer should hold the weight of the Gorenje dryer (see chapter »WASHING MACHINE DESCRIPTION/Technical information«).

Washing machine installation clearances

1

2

INFORMATION!

The washing machine may not be in contact with a wall or adjacent furniture. For optimum washing machine operation, we recommend observing the clearances from the walls as indicated in the figure. In case of failure to observe the minimum required clearances, safe and correct washing machine operation cannot be ensured. Moreover, overheating can also occur (figures 1 and 2).

INFORMATION!

Installing the washing machine under a countertop is not recommended.

Opening the washing machine door (bird's-eye view)

See chapter "WASHING MACHINE

DESCRIPTION / Technical information".

a = washing machine depth

b = depth with door open

Connection to water supply

Attach the hose to the water tap by screwing it onto the thread.

A STANDARD

CONNECTION

BAQUA-STOP

CONNECTION

CTOTALAQUA-STOP

CONNECTION (WITH A FLOAT)

INFORMATION!

For normal washing machine operation, the pressure in the water main should be between 0.05 and 0.8 MPa (0.5–8 bar). Minimum dynamic water pressure can be determined by measuring the waterfall.

In 30 seconds, 1.2 litres of water should flow from a fully open tap.

INFORMATION!

Tighten the water supply hose by hand, firmly enough for the hose to have a good seal (max. 2 Nm). After connecting the hose, the seal must be checked for any leaks. Do not use pliers or similar tools when connecting the hose as this could damage the nut thread.

INFORMATION!

Only use the water supply hose supplied with the appliance. Do not use any used or other hoses.

INFORMATION!

When connecting the water supply hose, make sure to connect it in a way that allows adequate and unobstructed water supply.

AQUA-STOP connection

(depending on the model)

If an internal tube or hose is damaged, a shut-off system is activated that cuts the water supply to the washing machine. In such case, the control glass (a) will turn red. Replace the water supply hose.

TOTAL AQUA-STOP connection (with a float)

(depending on the model)

If an internal tube or hose is damaged, a shut-off system is activated that cuts the water supply to the washing machine. In such case, the control glass (a) will turn red. Replace the water supply hose.

If there is water on the bottom of the washing machine, the float (b) will rise and trigger a shut-off system to cut the water supply to the washing machine; washing process is stopped, water supply is shut off, the appliance engages the pump, and signals an error.

Connecting and securing the water discharge hose

Feed the water discharge hose into a washbasin or bathtub, or connect it directly to a drain (minimum drain connection diameter is 4 cm). The vertical distance from the floor to the end of the discharge hose may be no more than 100 cm and no less than 60 cm. It can be attached in three ways (A, B, C).

A Discharge hose end may be placed over a washbasin or bathtub. B Use a string fed through the opening in the elbow support to attach the hose and prevent it from slipping to the floor.

B Discharge hose may also be attached directly to the washbasin drain.

C Discharge hose can also be attached to a wall drain with a trap; such trap should be properly installed to allow cleaning.

D The discharge hose has to be attached and affixed to the pin on the back of the washing machine, as shown in the figure.

INFORMATION!

If the drain hose is not correctly attached, safe and correct washing machine operation cannot be ensured.

Connecting to the power mains

ELECTRIC SHOCK!

Before connecting the washing machine to the power mains, wait for at least 2 hours until it reaches room temperature.

Connect the washing machine to a grounded power outlet. After installation, the wall outlet should be freely accessible. The outlet should be fitted with an earth contact (in compliance with the relevant regulations).

Information on your washing machine is indicated on the rating plate (see chapter "WASHING MACHINE DESCRIPTION / Technical information").

ELECTRIC SHOCK!

We recommend using over-voltage protection to protect the appliance in case of a lightning strike.

WARNING!

The washing machine may not be connected to the power mains using an extension cord.

INFORMATION!

Do not connect the washing machine to an electrical outlet intended for an electric shaver or hair dryer.

INFORMATION!

Any repair and maintenance pertaining to safety or performance should be done by trained experts.

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Make sure the washing machine is disconnected from the power mains; then, open the door towards you (figures 1 and 2).

Before first use, clean the washing machine drum with a soft moist cotton cloth and water, or use the Cotton 90°C programme. There should be no laundry in the washing machine drum; the drum should be empty (figures 3 and 4).

WARNING!

Do not use any solvents or cleaning agents that could damage the washing machine (please observe the recommendations and warnings provided by the cleaning agent manufacturers).

Connecting the appliance to the ConnectLife application

ConnectLife is a smart home platform that connects people, devices and services. The ConnectLife application includes advanced digital services and carefree solutions that allow users to monitor and control appliances, receive notifications from a smartphone, and update software (supported features may vary depending on your appliance and the region/country in which you are located).

To connect your smart device, you need a home Wi-Fi network (only 2.4 GHz networks are supported) and a smartphone equipped with the ConnectLife application.

To download the ConnectLife application, scan the QR code or search for ConnectLife in your favourite app store.

1. Install the ConnectLife application and create an account.
2. In the ConnectLife application, go to the "Add device" menu and select the appropriate type of device. Then scan the QR code (it can be found on the nameplate of the appliance; you can also enter the AUID/SN number manually).
3. The application then guides you through the entire process of connecting the appliance to your smartphone.
4. After a successful connection, the appliance can be operated remotely via the mobile application.

Useful tips for your smart device

Where to find the QR code for the devices required by the App during the installation process?

The QR code can be found on the warranty card or on the rating plate of the appliance.

How to enable Wi-Fi on the device?

Check that the appliance is switched on; the programme selection button can be in any position. Then do the following:

• In the ConnectLife app, open the add device menu.
• Follow the instructions in the ConnectLife application, where you will pair your phone and appliance and add the appliance to your home Wi-Fi network. - Select the type of appliance. - Scan the QR code (it can be found on the warranty card or on the rating plate of the appliance).

- Simultaneously press and hold the positions (7+8) on the appliance until the display shows. The 5-minute countdown will begin.

- In the ConnectLife app, instructions will guide you through the process of entering the appropriate data for your appliance to connect to your home network.

How to enable remote start of the appliance?

Move the programme selection button to ConnectLife/REMOTE CONTROL (remote control).

Press the (3) START/PAUSE button (the door must be closed).

How to add a user?

Check that the appliance is switched on; the programme selection button can be in any position. Then do the following:

- In the ConnectLife app, open the add device menu.

- Follow the instructions in the ConnectLife application where you will pair the phone and the appliance.

- Select the type of appliance.

- Scan the QR code (it can be found on the warranty card or on the rating plate of the appliance).

• Simultaneously press and hold the positions (7+8) on the appliance until the display shows.

The 3-minute countdown will begin.

- You can then complete and confirm the setting in the app.

How to remove the users (UnPair)?

To remove all users, hold down the (7+8) keys until the display shows; confirm your selection by pressing (3) the START/PAUSE button.

INFORMATION!

This step will remove all active users of the appliance. If you want to operate the appliance

remotely again, you will need to repeat the process of adding a user.

Which Wi-Fi router can be used?

Only 2.4 GHz networks are supported. If the ConnectLife app cannot find your local network during the connection set-up process, check the following:

• your router is operating at the frequency of 2.4 GHz,
• your network is hidden, and • your signal is strong enough.

Do you have more questions?

Please visit us at www.connectlife.io or contact us at [e-mail].

Remotely upgrading the software

Check the software update options in the app ConnectLife.

WASHING PROCESS, STEP BY STEP (1-7)

Step 1: Heed the labels on the laundry.

Normalwash; Sensitivelaundry
	Max.washingtemp. 95°C		Max.washingtemp. 40°C			Handwashonly
	Max.washingtemp. 60°C		Max.washingtemp. 30°C			Donotwash
E
					BleachingnotallowedBleachingincoolwater
C
					PetroleumsolventR11,R113Drycleaningwithallage
	Drycleaninginkerosene,purealcohol, andR113				Drycleaningnotallowed
II
					Hotironing,max.110°CHotironing,max.200°C
					IroningnotallowedHotironing,max.150°C
C
					HightemperatureDryflat(placeonaflatsurface)
					LowtemperatureDripdry
					TumbledryingnotallowedLinedry

Step 2: Preparing the washing process

1. Sort the laundry by type of fabric, colour, soiling, and allowed washing temperature (see PROGRAMME TABLE). 2. Wash the laundry that sheds a lot of fibre or lint separately from other laundry.
2. Empty the pockets. Coins, nails etc. could damage the machine and the fabric. 4. Close the buttons and zippers, tie any ribbons, and turn the pockets inside out; remove any metal clips that could damage the laundry and washing machine interior, or clog the drain.
3. Place very sensitive clothes and small items in a special-purpose laundry washing bag. (The special-purpose laundry bag is available as an optional accessory.)

Before using the washing machine, carefully remove any solid objects and particles from the textiles you intend to wash to prevent damage to the appliance or clogging of the pump filter. This includes (also check all pockets and flaps):

• solid objects (e.g., screws, clips, small stones, hay, etc.),
• food residues (e.g., bones, dried dough, etc.), • dried particles of construction materials (e.g., mortar, sand, mud, etc.).

WARNING!

The manufacturer assumes no responsibility for malfunctions resulting from failure to follow these instructions, which may also affect the validity of the warranty. Furthermore, the manufacturer does not cover service costs in the event of foreign objects in the pump or pump cleaning.

Switching on the washing machine

Use the power cord to connect the washing machine to the power mains, and connect the washing machine to the water supply.

Press the (1) ON/OFF button to switch on the washing machine (figures 1 and 2).

1

2

Loading the washing machine

Open the washing machine door by pulling the handle towards you (figure 1).

Insert the laundry into the drum (after making sure the drum is empty) (figure 2).

Make sure that no garment is stuck between the door and the rubber gasket.

Close the washing machine door (figure 3).

1

2

3

Do not overload the drum! See PROGRAMME TABLE and observe your nominal load as indicated on the rating plate.

If the washing machine drum is too full, the laundry will not be washed as thoroughly.

Step 3: Choosing the washing programme

Choose the programme by rotating the programme selector knob (2) to the left or to the right (depending on the type of laundry and how heavily soiled it is). See PROGRAMME TABLE.

INFORMATION!

During operation, the programme selector knob (2) will not rotate automatically.

INFORMATION!

Washing programmes are comprehensive programmes that include all washing stages, including softening and spinning (this does not apply to Partial programmes).

INFORMATION!

Partial programmes are independent programmes. Use them when you feel you don't need the entire washing programme.

Program chart

Program		Max. load	Max. 3)	Programmedescription
	Cottonwhite (Cottonwhite)40°C-90°C	*MAX	MAX1)	Programmeforwashingwhitecottonlaundry,towels,bedlinen,T-shirts...Thetemperaturecanbesetseparately;therefore,observetheinstructionsindicatedon theclothing.Spinningspeedcanbesettoyour preference.Programmedurationandamountofwaterwill beadjustedtotheamountoflaundry.Toreducecreasing,pressthe(6)OPTIONS(EXTRAFUNCTIONS)buttonbefore thestartofthewashingprogramme,andselect theANTICREASE(CREASEPREVENTION) and/orSTEAMfunction.
	(Colour)*-60°C	*MAXColoMAX1)		Programmeforcolouredlaundrymadeofcotton.Thetemperaturecanbesetseparately;therefore,observetheinstructionsindicatedon theclothing.Spinningspeedcanbesettoyourpreference.Programmedurationandamountofwaterwill beadjustedtotheamountoflaundry.
	(Mixedlaundry/-Synthetics)*-60°C	3,5kgMix	12002)	Washingprogrammefordelicateclothingmade ofsyntheticandmixedfibresorviscose,and forsimplecareofcotton.Observe the instructionsindicatedontheclothing.
	(Wool&Hand)*-40°C		8002kg	Wel oatewashingprogrammeforwashing woollens,silk,andclothesthatrequiremanual washing.Maximumtemperatureis40°C.This programmehasashortspinningcycle.Top spinningspeedavailableis800rpm.
∅	4)	*MAXEco	40A601)	Normallysoiledcottonlaundrythatcanbe washedatboth40°Cand60°Ctogetherinthe samecycle.Theprogrammeisusedtoassesscompliance withEUecodesignlegislation.
	40°C	4kgPower	120132)	Programmeforsmalleramountsoflightlysoiled laundry.Thewashingprogrammeincludes intensivetumblingandmaximumspinningrate.Theprogrammelasts59minutes.Whenusing theFAST(FAST)function,theprogrammelasts 32minutes.
	(Speed20')30°CDrumclean (Self-cleaning programme)	2,5kgSpeed0 kg	1202)	Quickwashingprogrammeforlightlysoiled laundrythatonlyneedsrefreshing.Thisprogrammeisusedforcleaningthedrum andremovingtheresidueofdetergentand bacteria.Toselecttheprogramme,rotatethe programselectorknobtotheleftortotheright totheDrumclean(Cleaningprogramme) position.Otherextrafunctionscannot be selected.Thedrummustbeempty.Donotadd detergentorsoftener!Youcanaddsomespirit vinegar(approx.2dl)orsodiumbicarbonate(1 tablespoonor15g)foreffectivedescaling.We recommendthatyouusetheprogrammeatleast onceamonth.Youcanaddtheagentstothemainwash compartmentortothedrum.
[2274]	(Spinningrate|Drain)(Partialprogramme)	/Spin|Dmax 1)		Usetheprogrammewhenyouonlywishtospin thelaundry.Ifyouwishtoonlydrainthewater fromthewashingmachine,withoutspinning, pressthe(5)SPINmultipletimes,untilno indicator(light)ison.Thedisplayshows0:01.
	(Rinse&Softening)(Partialprogramme)	/Rinse&Softening 1)		Forsoftening,starching,orimpregnatingthe washedlaundry.Itcanalsobeusedasarinse programme,butwithoutaddedsoftener.Itis completedwithanadditionalrinse.YoucanalsochooseWATER+(EXTRAWATER) byselectingtheextrafunction(pressthe(6)OPTIONS(EXTRAFUNCTIONS)button beforethestartofthewashingprogramme).
[BDGS]	(Feathers/Down)20°C-40°C		800**(1/2)	Rishowprogrammeissuitableforpillowsand jacketsstuffedorpaddedwithdown.Thewash takesplaceatalowtemperature,withalarge amountofwater,withgentletumbling,anda gentlespincycle.
	Shirts (Shirtswithsteam)*-40°C	3,5kg	1200 2)	Thisprogrammisintendedforwashinggarments madeofcotton,microfibresandsynthetics;for washingcollarsandcuffs.Thewashtakesplace atalowtemperature,withagreateramountof waterandgentletumbling.Presetspinning speedis800rpm.Totreatlaundrywithsteam,pressthe(6)OPTIONS(EXTRAFUNCTIONS)buttonand selecttheSTEAMfunction.
[2767]	Pets (Pethairremoval)30°C-60°C	*MAX	MAX 1)	Duringthisprogramme,pethairisremovedfrom yourgarments.Thewashingprogramme includesanautomaticprewashandadditional rinses.Totreatlaundrywithsteam,pressthe(6)OPTIONS(EXTRAFUNCTIONS)buttonand selecttheSTEAMfunction.Afterthewashingprogrammecompletion,clean theglassonthewashingmachinedoorandthe pumpfilterinwhichpethaircouldbetrapped.WerecommendrunningtheDrumclean(Self-cleaningprogramme)programmeafterthe wash,inordertothoroughlyremoveanypethair fromthewashingmachine.
	Baby (Babyclothes)40°C-90°C	*MAX	MAX1)	Forwashingclothesrequiringspecialcare,such asinfantgarments.Werecommendturningthegarmentsinsideout asthiswillalsothoroughlywashouttheskin scalesorresiduesofskintreatmentproducts.Theprogrammeisacombinationofaprolonged heatingandanextrarinsethatremovesany detergentresidue.Thewashingprogramme includesanautomaticprewashandadditional rinses.Totreatlaundrywithsteam,pressthe(6)OPTIONS(EXTRAFUNCTIONS)buttonand selecttheSTEAMfunction.
	Extrahygiene 40°C-90°CRemotecontrol (Remotecontrol)	*MAX	MAX1)	Thiswashingprogrammeisusedforwashing cottongarmentsthatrequirespecialcare,such asclothesforpeoplewithhighlysensitiveskin orallergies.Werecommendturningthe garmentsinsideout,asthiswillalsothoroughly washouttheskinandotherresidues.Totreatlaundrywithsteam,pressthe(6)OPTIONS(EXTRAFUNCTIONS)buttonand selecttheSTEAMfunction.UsetheRemotecontrolprogrammetoremotely controyourappliance(usingyourphone).You canselectallprogrammesavailableonyour appliance(seechapters»BEFOREUSINGTHE APPLIANCEFORTHEFIRSTTIME/Connecting theappliancewiththeConnectLifeapp«and »WASHINGPROCESS,STEPBYSTEP (1-7)/Step3:Remotecontrolofwashusingthe app«). Youcanalsoselectadditionalprogramsinthe app.

Maximum declared load (MAX) - see rating plate*

Half load (1/2)**

Any load (0kg - MAXkg)/

* Cold wash

¹⁾ Maximum spinning rate (MAX) - see rating plate 2) Depending on the model 3) Maximum spinning rate ⁴⁾ Test programme for compliance with the Commission Regulation (EU) No. 2019/2023 on ecodesign and Regulation No. 2019/2014 on energy labelling.

Recommendations for detergents under Regulation (EU) No. 1015/2010

Program		Detergent
		Universal	Forcoloured laundry	Fordelicate laundryand wool	Special
	Cottonwhite (Cottonwhite)	√	√	—	—
	Colour (Colour)	√	√	—	—
	Mix (Mixedlaundry/-Synthetics)	—	√	—	—
	Wool (Wool&Handwash)	—	—	√	√
	Eco40-60	√	√	—	—
	Power59'32'	—	√	√	—
	Speed20' (Speed20')	—	√	—	—
	Drumclean (Self-cleaning programme)	—	—	—	—
	Spin|Drain (Spinningrate|Drain)	—	—	—	—
	Rinse&Soft. (Rinse&Softening)	—	—	—	—
	Pillow (Feathers/Down)	√	√	√	—
—	Shirts (Shirtswithsteam)	√	√	√	√
	Pets (Pethairremoval)	√	√	√	—
	Baby (Babyclothes)	√	√	√	√
	Extrahygiene	√	√	√	—

√ Recommendation — No recommendation

INFORMATION!

In terms of energy and water consumption, programmes that operate at lower temperatures and last longer are generally the most efficient.

INFORMATION!

Noise and residual moisture content are affected by the spinning rate: the higher the spinning rate in the spin cycle, the higher the noise and the lower the residual moisture content.

INFORMATION!

Add powder or liquid detergents according to the manufacturer's instructions, considering the washing temperature, washing program, how soiled the laundry is, and water hardness.

When excessive foaming occurs in the washing machine or foam spills through the dosing container, the washed laundry must be thoroughly rinsed. Choose a washing programme with a large amount of water without using detergent.

INFORMATION!

Maximum amount of laundry in kg (for the Cotton programme) is indicated on the washing machine rating plate (see chapter »WASHING MACHINE DESCRIPTION/Technical information«).

INFORMATION!

Maximum or nominal load applies to laundry prepared pursuant to the IEC 60456 standard.

INFORMATION!

For better washing effect, we recommend loading the drum to 2/3 when using the cotton programmes.

INFORMATION!

Low water temperature, low mains voltage and different washing loads may affect the washing time; the remaining time displayed is adjusted accordingly during the washing process.

Time optimization during the programme progress

In the early stage of the washing programme, the washing machine uses advanced technology to detect the amount of laundry. After load detection, the washing machine adjusts the programme duration.

Washing programmes with steam

Adding steam during the last washing step loosens the laundry, slightly disinfects it and eliminates some allergens. After using such a programme, the laundry will be soft, supple and fresh, and it will require less ironing.

Use of steam (press the 10 button) also allows omitting or reducing the amount of conditioner.

For a better effect of steam on the laundry, we recommend a half load.

Washing programs with laundry disinfection function

With programs featuring the icon, you can replace the pre-wash with the disinfection function (Super hygiene).

After choosing the disinfection function, add the disinfectant into the special-purpose dispenser found in the pre-wash compartment.

Only add the amount of disinfectant recommended by its manufacturer. Recommended drum load is no more than 3 kilograms. Observe the instructions provided by the manufacturer of the product you are using. Only use disinfectants intended for clothing. Use of other disinfectants could damage your clothes (discoloration, stains, etc.). If you are washing delicate laundry, inquire with the garment manufacturer whether it can be washed with disinfectants, in order to avoid any damage to your clothes.

You take full responsibility for the use of disinfectants.

INFORMATION!

If you have selected a program with a pre-wash cycle and you have added powder detergent to the pre-wash compartment, remove the disinfectant dispenser tray.

Remote control of wash using the app

INFORMATION!

See chapter WASHING PROCESS, STEP BY STEP (1-7) and observe steps 1 and 2.

On the appliance:

1. Close the washing machine door and close the detergent compartment.
2. Rotate the program selector knob to position ConnectLife/REMOTE CONTROL (Remote control).
3. Press (3) the START/PAUSE button. The remote control symbol REMOTE START (REMOTE START) switches on.

Remote control is available for the next 24 hours, even when the appliance enters standby mode. The door is locked during this time, so it cannot be opened. Remote control can be cancelled by pressing (3) START/PAUSE.

Continue operating the appliance in the ConnectLife app, where you can choose from several options (selection, launch, and monitoring and stopping of the programme, amongst other additional settings).

INFORMATION!

The washing process can be controlled/monitored from the app.

INFORMATION!

Washing machine operation can be paused or stopped by choosing STOP/ADD CLOTHES/PAUSE ...

Some options can be implemented remotely in full, and some require your physical presence, such as adding laundry during a washing cycle (ADD CLOTHES).

INFORMATION!

You can also control your appliance from your phone if you are not connected to the same Wi-Fi network as your appliance (the phone only needs an active internet connection). This means you can also control your appliance when you are away from home.

INFORMATION!

You can operate the appliance with multiple devices. You can also control and monitor the operation of the appliance with any phone connected to the appliance, regardless of which user has initiated the washing cycle. The appliance can be connected to/controlled simultaneously with several ConnectLife user accounts.

INFORMATION!

After you have started the appliance from your phone, a person located next to the appliance can take over and manually turn off or control the appliance; the app will notify you in such case. In such case, controlling the appliance remotely from your phone is no longer possible. If you wish to control the appliance from your phone again, all required steps must be repeated.

Step 4: Selecting extra functions

Settings using a single button press

Most programs feature basic settings, but these settings can be changed.

Adjust the settings by pressing the relevant function button (just before pressing the (3) START/PAUSE button).

Functions that cannot be changed with the selected washing program are partly lit (dimmed).

Certain settings cannot be selected with some programs. Such settings will not be lit, and the button will flash when pressed (see FUNCTION TABLE).

Description of function indicators for selected washing program:

- lit (Basic/preset setting);

- dimmed (Functions that can be adjusted) and

- unlit (Functions that cannot be selected).

Changing the temperature for these selected programs.

Each program has a preset temperature that can be changed by pressing the position (4) TEMP. (WASHING TEMPERATURE).

The selected temperature is lit.

SPIN (SPINNING RATE/PUMP STOP/DRAIN)

To adjust the spinning rate. Every program (except for Drum Clean (Self-cleaning program)) has a preset spinning rate that can be adjusted by pressing position (5) SPIN (SPINNING RATE/PUMP STOP/DRAIN).

If you select the Drain function without spinning, then no indicator (light) will be lit on the display unit. Washing time will be accordingly shorter.

If you select draining without spinning, 0:01 will appear on the display unit.

If you select "Pump stop", the symbol will appear on the display unit.

Select the "Pump stop" function when you wish the laundry to stay soaked in the water from the last rinse cycle in order to prevent it from creasing when you are unable to take it from the washing machine immediately after the washing programme is complete. You may set the desired spinning rate. To continue the program, press the (3)

START/PAUSE button that is lit. Water will be drained (pumped out) and the final spin cycle will be run.

FAST (FAST)

When the FAST (FAST) function is activated, the washing programme will be carried out with a shorter washing duration. There are two available choices (depending on the selected washing programme).

After pressing the position (7) FAST (FAST), the indicator (light) will turn from a partly lit to fully lit symbol, and the total programme time on the display unit will be adjusted accordingly.

To further shorten the washing programme, press the position (7) FAST (FAST) one more time, and the total programme time will be adjusted once more.

If you press the button once again, this setting is reset back to default.

First press - FAST (FAST)

Second press - SUPERFAST (SUPERFAST)

Third press - DEFAULT (DEFAULT)

We recommend a half-load for the Cotton programme.

DELAY END (DELAYING THE END OF THE WASHING PROGRAM)

Press the position (8) DELAY END (DELAYING THE END OF THE WASHING PROGRAM) to delay the programme completion time by up to 24 hours.

Settings procedure:

• Select the desired programme and extra functions.
• Press the position (8) DELAY END (DELAYING THE END OF THE WASHING PROGRAM) to activate the function.
• Repeatedly press this position to set the desired programme completion time (with 30-minute increments up to 6 hours, and 1-hour increments thereafter, up to 24 hours).
• To activate the function, press the (3) START/PAUSE button.

The washing machine starts counting down this time. When the countdown reaches the programmed duration (e.g., 2:30), the washing programme starts automatically.

To reset or change the delayed end of the washing programme, press the ON/OFF button (1) for at least 3 seconds.

To quickly reset the delayed end of the washing programme, press the position (8) DELAY END (DELAYING THE END OF THE WASHING PROGRAM) for 3 seconds. The washing program will resume.

Example of function setting:

It is now 9 PM, and you wish the washing program to be completed at 6 AM the next morning. Then set the DELAY END time to 9 hours.

INFORMATION!

Some settings cannot be selected with certain programmes. Such functions will not be lit on the display unit, and when the corresponding button is pressed, an acoustic signal will be emitted and the light on the button will flash (see FUNCTION TABLE).

INFORMATION!

Activate/deactivate the functions by pressing the desired function (before pressing the (3) START/PAUSE button). An indicator will light up next to the selected functions.

INFORMATION!

If you have set the DELAY END (DELAYING THE END OF THE WASHING PROGRAM) function and you are using liquid detergent, we do not recommend setting a program without a pre-wash.

Settings using a combination of two buttons pressed simultaneously.

PREWASH/SUPERHYGIENE

Washing heavily soiled laundry, particularly with stubborn superficial stains. The prewash function can only be activated after the washing program has been selected. Turn it on by simultaneously pressing (4) TEMP. (WASHING TEMPERATURE) and (5) SPIN (SPINNING RATE/PUMP STOP/DRAIN) for at least 3 seconds. The display shows the changed (extended) duration of the programme.

The symbol lights up on the display (12).

INFORMATION!

If you select PREWASH, add the detergent into the prewash compartment.

CHILDLOCK

To ensure safety. Turn it on by simultaneously pressing (5) SPIN (SPINNING RATE—DRAIN/PUMP STOP/PUMP) and (6) OPTIONS (EXTRA FUNCTIONS) for at least 3 seconds. The display will show the time countdown. The selection will be confirmed by an acoustic signal (if it is not switched off). You can also deactivate the childlock using the same procedure. As long as the childlock is activated, you cannot change the programme, settings or additional functions.

Childlock remains active even after the washing machine is switched off. When both are pressed, the display (14) starts the animation »Loc On« when switched on, or »Loc OFF« when the childlock is switched off.

SOUND OFF

To turn off the sounds, simultaneously press the positions (6) OPTIONS

+(EXTRA FUNCTIONS) and (7) FAST (FAST) and hold them for at least 3 seconds.

The selection will be confirmed by an acoustic signal.

To turn the sound back on, hold (6) and (7) for at least 3 seconds. If you turn off the sound, there will be no acoustic warning at the end of the washing programme.

Wi-Fi MENU

The Wi-Fi menu is used for connecting the appliance and for remote control.

The program selection button can be in any position.

Simultaneously press positions (7) FAST and (8) DELAY END (delaying the end of the washing program) and hold them until the desired setting appears on the display.

Possible settings (depending on the duration for which the keys (7+8) are held):

• 0-3 seconds - turns appliance connectivity off. •3-6 seconds - Con [on] - the appliance can be connected to a Wi-Fi network for 5 minutes.
• 6-9 seconds - PAr
• the appliance can be connected to the ConnectLife app for 3 minutes. The function will only be active if you have already connected the appliance to your Wi-Fi network.

•9-12 seconds - UnP

UnP - removes all users.

- 12 seconds or more The appliance returns to its original state.

INFORMATION!

When the washing machine is switched off, all extra functions return to their basic or custom settings, except for the acoustic signal setting and Wi-Fi settings.

Step 5: Selecting additional functions

INFORMATION!

Activate/deactivate the functions by pressing the desired function (before pressing the (3) START/PAUSE button).

Some settings cannot be selected with certain programmes. Such functions will not be lit on the display unit, and when the corresponding button is pressed, an acoustic signal will be emitted and the light on the button will flash (see FUNCTION TABLE). The functions that are available will be dimly (partially) lit.

OPTIONS (EXTRA FUNCTIONS)

By repeatedly pressing the (6) OPTIONS (ADDITIONAL FUNCTIONS) button for the selection of additional functions, you can choose between three functions and eight different function combinations (depending on the selected programme):

When the function is selected, the corresponding symbol is illuminated:

• ANTICREASE (CREASE PREVENTION). To prevent creasing, select the function ANTICREASE (CREASE PREVENTION). Gentle tumbling will continue after the end of the washing programme. This function is recommended for delicate laundry. The display unit (14) displays. The function can be terminated at any time by pressing (3) the START/PAUSE button. • WATER+ (EXTRA WATER). Use this function to wash with a larger amount of water on some programmes. • STEAM (STEAM). Adding a 20-minute steam cycle at the end of the programme will soften and disinfect your garments, and reduce or do away with the need for ironing and using softener/conditioner for your laundry.

Extra function table

Programmes		FAST	SUPERFAST	DELAYEND	PREWASH+ SUPERHYGIENE	ANTICREASE	WATER+	STEAM	SPIN	RINSE&HOLD
	Cottonwhite(Cottonwhite)40°C-90°C									......
	Colour (Colour)*-60°C									......
	Mix (Mixedlaundry/-Synthetics)*-60°C									......
	Wool (Wool&Hand)*-40°C									......
	Eco40-60			•					•	•
	Power59'32'40°C									......
	Speed20'(Speed20')30°C			•		•			•	•
	Drumclean(Self-cleaningprogramme)			•				•
	Spin|Drain (Spinningrate|Drain)(Partialprogramme)			•					•
	Rinse&Soft.(Rinse&Softening)(Partialprogramme)									......
	Pillow(Feathers/Down)20°C-40°C									......
	Shirts(Shirtswithsteam)*-40°C									......
	Pets(Pethairremoval)30°C-60°C									......
	Baby(Babyclothes)40°C-90°C									......
	Extrahygiene40°C-90°C									......

Additional functions can be used •

Step 6: Starting the washing programme

Press the button (3) START/PAUSE.

TIME REMAINING TO PROGRAMME COMPLETION or DELAY END

time (if set) will appear on the display.

Symbols will be lit on the selected functions.

After pressing the (3) START/PAUSE button, you can choose the spinning rate SPIN (SPINNING RATE/DRAIN/PUMP STOP) (except in the case of the Drum clean (Self-cleaning) programme) and CHILD LOCK; you cannot change the other settings.

INFORMATION!

If the TIME REMAINING UNTIL PROGRAMME COMPLETION flashes three times on the display unit, and there is an audible signal, this means that the washing machine door is open or not closed tightly. Close the washing machine door and press the (3) button START/PAUSE again to resume the washing programme.

Step 7: End of the washing programme

The washing machine will indicate the end of the washing programme with an acoustic signal and will appear on the display until the washing machine switches into low standby mode or switches off. After 5 minutes, the sign will no longer be displayed.

1. Open the washing machine door.
2. Take the laundry from the drum.
3. Wipe the rubber door gasket and the door glass. 4. Close the door! 5. Shut off the water supply tap. 6. Switch off the washing machine (press the (1) ON/OFF button).
4. Unplug the power cord from the outlet.

INTERRUPTIONS AND CHANGING THE PROGRAMME

Manual interruption

To pause and cancel the washing programme, press the (1) ON/OFF button. Signal lights will flash on the display. At the same time, the washing machine pumps the water out of the washing machine drum. When the water is pumped out, the washing machine door will be unlocked. If the water in the washing machine is hot, the washing machine will automatically cool it and pump/drain it out.

Personal settings

Basic or default settings for each washing programme can also be changed. When you select the washing programme and additional functions, the combination can be stored by pressing the (3) START/PAUSE button and holding it for 3 seconds (the time is counted down on the display unit). will appear on the display.

The programme will remain stored until it is changed using the same procedure.

Personal settings can also be reset to factory settings in the user menu.

Personal settings menu

Switch on the washing machine by pressing the (1) ON/OFF button. Simultaneously press the (1) TEMP. °C (WASHING TEMPERATURE) and (6) OPTIONS + (EXTRA FUNCTIONS) positions to open the Personal Settings Menu. Signal lights for ANTI CREASE ⏻ (CREASE PREVENTION), WATER+ ⏻ (EXTRA WATER) and STEAM will light up on the display unit.

Number 1 will appear on the LED display, which also indicates the settings function. Rotate the programme selector knob (2) to the left or to the right to choose the function to change. Number 1 indicates sound settings and number 2 indicates resetting of Personal programmes to factory defaults. If the desired settings are not selected in 20 seconds, the programme will automatically return to main menu.

Press the (5) SPIN (SPINNING RATE/PUMP STOP/DRAIN) position to confirm the desired functions and their settings; press the (4) TEMP. (WASHING TEMPERATURE) position to go back one step.

Acoustic signal volume can be set at four levels (0 means the sound is off; 1 means that the button sound is activated; 2 means low volume, and 3 means high volume). Choose the volume level by rotating the programme selector knob (2) to the left or to the right. The lowest setting means that the acoustic signal is switched off.

Pause button

The washing programme can always be paused using the (3) START/PAUSE button. The washing programme is temporarily paused when the time remaining until programme completion is flashing on the display unit. If there is no water in the drum and water temperature is not too high, the door will unlock after a certain period of time, and it can be opened. You can continue the washing programme by pressing the (3) START/PAUSE button; but you first have to close the door.

Adding/removing laundry during washing machine operation

After a certain period of time, the washing machine door can be opened if the water level and temperature are below a predefined threshold.

If the conditions below are met, then the electronic door lock is released and the washing machine door can be opened; will appear on the display unit:

• Water temperature in the drum has to be suitable, • water level in the drum has to be below a certain value.

In order to add or remove laundry from the washing machine during programme operation, proceed as follows:

1. Press the (3) START/PAUSE button.
2. If all conditions for release of electronic door lock are met, then you can open the washing machine door and add or remove laundry from the drum. 3. Close the washing machine door!
3. Press the button (3) START/PAUSE.

The washing programme will resume.

INFORMATION!

If you add a considerable amount of laundry during the wash, the laundry could be washed less effectively, since the washing machine initially sensed lower weight of the load of laundry and added a smaller amount of water. Insufficient amount of water relative to the amount of laundry could also cause damage to the laundry (rubbing of dry laundry), and washing time can be longer.

INFORMATION!

Washing time will resume from the point at which the washing programme was interrupted.

Errors

In case of an error or fault, the programme will be interrupted.

An acoustic signal will warn about such occurrence (see TROUBLESHOOTING AND ERROR TABLE), and the error will be indicated on the display unit (E:XX).

Power supply failure

In case of a power supply failure, the washing programme is interrupted. When power supply is restored, the washing programme is resumed from the point at which it was interrupted. Upon completion of the washing cycle, /w alternate on the display unit. This informs the user about power supply failure and the effect on the execution of the washing programme.

Washing time will resume from the point at which the washing programme was interrupted.

Opening the door (pause/cancel/change programme)

Washing machine door can be opened, if the water level in the machine is low enough and if the water temperature is not excessively high.

INFORMATION!

If the washing machine is not connected to the power mains or in case of a power supply failure during the programme execution, then the washing machine cannot be opened. In such case, the washing machine has to be properly connected, or service technicians should be contacted.

Displaying the number of completed wash cycles

(depending on the model)

If you disconnect the appliance from the power supply, wait for 10 seconds, and then reconnect the power cord, information on the number of completed wash cycles is displayed on the display unit for 3 seconds. After 3 seconds, the appliance switches to standby mode.

CLEANING AND MAINTENANCE

ELECTRIC SHOCK!

Before cleaning, unplug the washing machine from the power mains.

Cleaning the dispenser tray

INFORMATION!

The dispenser tray should be cleaned at least twice per month.

1. To remove the dispenser tray from the housing, press the small tab. 2. Clean the dispenser tray under running water using a brush, and dry it. Also, remove any detergent residue from the bottom of the housing. 3. If necessary, clean the disinfectant dispenser tray. 4. If required, remove and clean the plug cap. 5. Clean the plug cap and the disinfectant tray under running water and replace them.

INFORMATION!

Do not wash the detergent compartment in the dishwasher!

Cleaning the water supply hose, detergent dispenser housing, and rubber door gasket

1. Clean the net filter often under running water. 2. Use a brush to clean the entire washing machine rinsing section, especially the nozzles on the upper side of the rinsing chamber. 3. After every wash, wipe the rubber door gasket and remove any object that may have become stuck in the gasket to extend its useful life.

Cleaning the pump filter

INFORMATION!

During cleaning, some water may be spilled. It is therefore recommended to place an absorbent cloth on the floor.

1. Open the pump filter cap using a suitable tool (flat screwdriver or similar tool).

2. Pull out the water outlet funnel before cleaning the pump filter. Rotate the pump filter slowly in the counter-clockwise direction. Pull out and remove the pump filter to allow the water to slowly drain.

3. Clean the pump filter thoroughly under running water.

4,5. Remove all objects and impurities from the filter housing and the impeller. Replace the pump filter as shown in the figure and fasten it by rotating in the clockwise direction. For a good seal, the filter gasket surfaces should be clean.

INFORMATION!

We recommend regular cleaning of the pump filter once a month. When washing very fleecy, very dirty, or old laundry, do it more often.

Cleaning the washing machine exterior

ELECTRIC SHOCK!

Always disconnect the washing machine from the power mains before cleaning.

Clean the washing machine exterior and display unit using a soft damp cotton cloth and water.

WARNING!

Do not use any solvents or cleaning agents that could damage the washing machine (please observe the recommendations and warnings provided by the cleaning agent manufacturers).

INFORMATION!

Do not clean the washing machine with a jet of water!

TROUBLE-SHOOTING

What to do...?

The washing machine shall automatically control the operation of particular functions during the washing cycle. If any irregularity is identified, this will be indicated by reporting (E:XX) on the display. The washing machine will report the error until it is switched off. Disturbances from the environment (e.g., the power grid) may result in various error reports (see TROUBLESHOOTING TABLE).

In such case:

• Switch off the washing machine and wait for a few seconds.
• Switch on the washing machine and repeat the washing programme.
• Most errors during operation can be resolved by the user (see TROUBLESHOOTING TABLE).
• If the error occurs again, call an authorized service unit.
• Repairs may only be carried out by an adequately trained person.

The following lists all the errors that the user can see on the user interface.

Troubleshooting and error table

Errors indicated on the display unit may include the following:

Problem/Error	problemdescription	Whattodo?Indicationonthedisplayunitand
	Incorrectsettings	Restarttheprogram;iftheerrorreoccurs,call aservicetechnician.
	Temperaturesensorerror	Inletwatertoocold.Repeatthewashing program.Ifthewashingmachinereportsthiserroragain, callaservicetechnician.
	Doorlockerror	Makesurethewashingmachinedooris closed.Ifyouhearanacousticsignalafterpressing the(3)START/PAUSEbutton,itmeansthat thedoorofthewashingmachineisnotclosed.Closethewashingmachinedoor.Unplugthepowercordfromtheoutlet;then, plugthepowercordbackintotheoutletand switchonthewashingmachine.Iftheerrorreoccurscallaservicetechnician.
Problem/Error	problemdescription	Whatodo?Indicationonthedisplayunitand
		Checkthefollowing:Waterfillingerroristhewaterinletvalveopen,isthefilteronthewaterinlethoseclean,isthwatersupplyhosedeformed(clipped,cloggedetc.),isthepressureinthewatermainsbetween0.05and0.8MPa(0.5-8bar)pressthe(3)START/PAUSEbuttontoresumetheprogramme.Iftheerrorreoccurscallaservicetechnician.
	Waterheatingerror	Restarttheprogram;iftheerrorreoccurs,callaservicetechnician.
		Checkthefollowing:Waterdrainingerroristhepumpfilterclean,isthedrainhoseclogged,isthedrainclogged,ifthedischargehoseplacedisplacedbelowthemaximumandabovetheminimumheight(seechapter»INSTALLATIONANDCONNECTION/Connectingandsecuringthewaterdischargehose«);pressthe(3)START/PAUSEbuttonagain.Iftheerrorreoccurscallaservicetechnician.
	Excessiveamountofdetergent	Toomuchdetergentmaycauseexcessivefoaminginthedrum.Seedescriptionfor
	Waterleakdetectedinthewashingmachinearea	Turnoffthewashingmachineandturnitbackon.Inspecttheexterioroftheappliance.Ifyoudonotobserveanyleaks,youcancontinuetousethewashingmachine.
	Waterlevelsensorerror	Unplugthepowercordfromtheoutlet;then,plugthepowercordbackintotheoutletandswitchonthewashingmachine.Venttheappliance.Dothisbydrainingandcleaningthewashingmachinefilterandcleaningthewall-mountedtrap.Iftheerrorreoccurscallaservicetechnician.
	Wateroverflow	Ifthereiswaterinthedrumthatexceedsacertainlevel,andanerrorisreportedonthedisplayunit,thewashingprogramwillbeinterruptedandwaterwillbepumpedoutofthewashingmachine.Restarttheprogram;iftheerrorreoccurs,callaservicetechnician.Ifthereiswaterinthedrumthatexceedsacertainlevel,andanerrorisreportedonthedisplayunit,whilethewashingmachinecontinuestoaddwater,closethewatertapandcallaservicetechnician.
	Excessiveamountofdetergent	Toomuchdetergentmaycauseexcessivefoaminginthedrum.Seedescriptionfor. Fd
	Motorcontrolerror	Manuallyredistributethelaundry(stuckortangledlaundry)andrepeatthewashingprogramme.
	Errorwhilelockingthedoor	Doorisclosed,butitcannotbelocked.Switchoffthewashingmachine.Switchitbackonandrestartthewashingprogram.Iftheerrorreoccurscallaservicetechnician.
	Errorwhileunlockingthedoor	Doorisclosed,butitcannotbeunlocked.Turnoffthewashingmachine,thenturnitbackon.Iftheerrorreoccurs,callaservicetechnician.Toopenthedor,seechapter»INTERRUPTIONSANDCHANGINGTHEPROGRAMME/Openingthedoor(Pause/Cancel/ChangeProgramme)«.
	Warningfromthesystemfordetectingincorrectpowermainsfrequency(50/60Hz)	Whentewashingmachinewasswitchedon,thesystemdetectedincorrectsupplypowerfrequency,whichcouldaffectwashingmachinefunctionality.Anyproblemsonthepowernetworkshouldbecheckedandcorrected.
	Appliancecannotbeconnectedtothenetwork.	Theerroronlyaffectstheoptiontoremotelycontrol(Remotecontrol)yourwashingprogramme.itdoesnotaffectthewashingprocessonotherprogrammes.Callaservicetechnician.
Information		Errorcauseanddescription,whattodo?Indicat
	ANTICREASE(CREASE PREVENTION)functionthatyou haveselectedasapartofthe washingprogrammeisactivated andinprogress	TostoptheANTICREASE(CREASE PREVENTION)function,pressthe(1)ON/OFF button.
	Waterdrainsystemalert Displayofwarning.	Alertaboutreducedwaterflowinthepumping stage.Checkthefollowing:isthepumpfilterclean,isthedrainhoseclogged,isthedrainclogged,ifthedischargehoseplacedisplaced belowthemaximumandabovethe minimumheight(seechapter»INSTALLATIONAND CONNECTION/Connectingandsecuring thewaterdischargehose«).
	SystemwarningtoruntheDrum clean(Self-cleaningprogramme)Afterthewashingprogrammeis complete,thesignsanwillEnd alternateonthedisplayunit.	Incaseofawaringonthedisplayafter washing,proceedasfollows:cleanthedosingcontainer,cleanthewatersupplyhose,detergent dispenser,andrubberdoorgasket,cleanthepumpfilter(seechapter»CLEANINGANDMAINTENANCE«)andruntheself-cleaningprogrammeDrum clean(seechapter»WASHINGSTEPS (1-7)/3.Step:Programmetable«).Self-cleaningprogrammeisusedtocleanthe drumandtoremovedetergentresiduesand bacteria.Thedrummustbeempty.Donotadd detergentorsoftener!Youcanaddsomespirit vinegar(approx.2dl)orsodiumbicarbonate (1tablespoonor15g)foreffectivedescaling.Werecommendthatyouusetheprogramme atleastonceamonthorwheneverwarning appears.
	Warningbythesystemfor detectingexcessivefoaming duringthewashingprogramme	Incaseofexcessivefoaminginthewashing machineorleakoffoamthroughthedetergent dispensertray,thewashedlaundryhastobe rinsedthoroughlywithalargeamountofwater.Chooseawashingprogramme,butdonotadd anydetergent.Werecommendchoosingthe Rinse&Softeningprogramme.Decreasetheamountofdetergentadded.
	Powersupplyfailurewarning(»PF«/PowerFailure)	Thesystemdetectedapowersupplyfailure duringthewashingprogrammeprogress, whichaffectedfunctionalexecutionofthe washingprogramme.Checkthepowersupplynetworktowwhichyour washingmachineisconnected.
	Powersupplyfailurewarning(»PF/End«)	Uponcompletionofthewashingcycle, end and will alternateonthedisplayunit.This informstheuseraboutpowersupplyfailure andontheeffectontheexecutionofthe washingprogramme.Thewashingprogram continueswhereitwasinterruptedandthen endssuccessfully.
	Warning-U:Lo (voltagebelow180V)	Aprolongeddropofvoltagetobelow180V wasdetected,whichcanaffectthewashing machineoperation.Checkthepowersupplynetworktowwhichyour washingmachineisconnected.
	Unresponsivedisplayunitandall buttons	Unplugthepowercordfromtheoutlet.Check ifthesupplyvoltageissuitableforthewashing machine(220-240V);then,plugthepower cordbackintotheoutletandswitchonthe washingmachine.
	Warning-U:Hi (voltageover260V)	Aprolongedvoltagesurgetoover260Vwas detected,whichcanaffectthewashing machineoperation.Checkthepowersupplynetworktowwhichyour washingmachineisconnected.
	Washingmachinestandingby, readytoresumethewashing programmeThetimeremaininguntil programmecompletionis alternatelylitandoffonthedisplay unit.	Toresumethewashingprogramme,pressthe button(3)START/PAUSE.
	Preparationforunlockingthe doorSignallightswillflashonthe displayunit.	Waitfortheprocesstofinish.Ifnoerrorsare shownaftertheprocess,anewcyclecanbe run.Waterhastobedrained.Waitforthedoorto unlock.
	Theappliancecannotbe controlledremotely	Applianceremotecontrolisnotactivatedor enabled.CheckiftheWi-Fisymbolontheappliance islit,andsettheprogramselectorknob(1)topositionREMOTECONTROL(ConnectLife) (Remotecontrol).
Information		Errorcauseanddescription,whattodo?Indicationonth
	Theappliancewillnotconnect totheWi-Finetwork	TheappliancecannotfindyourWi-Finetwork. Checkwhether2.4GHznetworkisactivated onyourrouterandwhethertheWi-Fisignalat theapplianceisstrongenough.

INFORMATION!

Noise and vibration – make sure the appliance is levelled using the adjustable legs and that the jam nuts are securely tightened.

Unevenly distributed laundry or lumps of laundry in the washing machine drum can cause problems such as vibration and noisy operation. The washing machine detects such problems and the UKS* (*stability control system) will be activated.

Smaller loads (e.g., one towel, one sweater, one bathrobe, etc.) or clothes made of materials with special geometrical properties are virtually impossible to distribute evenly across the washing machine drum (slippers, large items, etc.). This results in several attempts to redistribute the laundry, which in turn leads to longer programme duration. In extreme cases of unfavourable conditions, the programme can be completed without the spinning cycle.

The UKS^* (stability control system) allows stable operation and longer washing machine useful life.

If the problem persists despite observing the advice above, call an authorized service technician.

Service

Before calling a service center

When you contact a service center, please state your washing machine's type (1), code/ID (2), model number (3), and serial number (4).

Washing machine type, code, model, and serial number can be found on the rating (type) plate on the inner side of the washing machine door.

WARNING!

In case of a failure, only use approved spare parts by authorized manufacturers.

WARNING!

Repair or any warranty claim resulting from incorrect connection or use of the washing machine shall not be covered by the warranty. In such cases, the costs of repair shall be charged to the user.

INFORMATION!

The warranty does not cover consumables, minor deviations in colour, increased noise that results from appliance age and which does not affect the functionality of the appliance, and aesthetic defects on components, which do not affect the functionality and safety of the appliance.

The warranty does not cover the errors or failures resulting from disturbances from the environment (lightning strike, power grid failures, natural disasters etc.).

INFORMATION!

Report any malfunction to your local call centre or web address; all information can be found in the enclosed warranty statement. Contact details of your authorised service centre are available in the warranty statement supplied with the appliance and on the website by scanning the QR code on the rating plate.

INFORMATION!

Some simple faults described in the chapter »TROUBLESHOOTING/Troubleshooting and error table« can be fixed by the user himself by taking into account the instructions without risk to their own safety and without affecting the warranty conditions.

INFORMATION!

Functional spare parts for the washing machine you purchased will be available for 10 years. During this time, original spare parts will be available to ensure the correct operation of your appliance.

A list of spare parts and repair tips in accordance with the current Ecodesign Directive can be found by scanning the QR code located on the inside of the door of the washing machine. Or on the following link: https://auid.connectlife.io.

RECOMMENDATIONS FOR WASHING AND ECONOMIC USE OF YOUR WASHING MACHINE

Wash new coloured garments separately the first time.

Wash heavily soiled laundry in smaller amounts, with more powder detergent or with a pre-wash cycle.

With slightly soiled laundry, we recommend a programme without a pre-wash cycle, use of shorter programmes (e.g. FAST) and a lower washing temperature.

Apply a special stain remover on stubborn stains before the wash.

Use of chlorine-based bleaches is not recommended as they can damage the heater.

If you wash at low temperatures and/or with liquid detergents, there is a risk of developing microorganisms and an unpleasant odour in the washing machine. Leave the washing machine door open after each wash to allow the appliance to dry. If you detect an unpleasant odour, run the Drum clean programme.

To prevent and remove limescale deposits only use agents with added anti-corrosion protection. Observe the cleaning agent manufacturer's instructions. To remove limescale deposits, we recommend starting the DRUM CLEAN programme. Add spirit vinegar (2 dl).

We recommend avoiding washing very small amounts of laundry as this will lead to excessive use of energy and poorer washing machine performance.

You can save energy and water by filling up the washing machine to the capacity specified by the manufacturer for each programme.

INFORMATION!

The following information is accessible via the QR code on the rating plate (see chapter »WASHING MACHINE DESCRIPTION/Technical data«):

• rated capacity in kg; • duration of the programme in hours and minutes; • energy consumption in kWh per cycle; • water consumption; • maximum temperature reached in the washing machine drum;
• residual moisture content after washing cycle and spinning rate.

At higher spinning rates, there will be less residual moisture in the laundry. As a result, drying in a tumble dryer will be more economical and faster.

Loosen any folded laundry before putting it into the drum.

If water hardness exceeds 14°dH, water softener should be used. Heater damage resulting from incorrect use of water softeners shall not be covered by the warranty. Check the information on water hardness with your local water supply company or authority.

Detergent compartment

Do not add hardened lumps of powder detergent into the detergent dispenser as this may clog the piping in the washing machine.

1 A separator/dividertab is supplied with the washing machine, which allows adding liquid detergent to the main wash compartment

(left compartment). There is a disinfectant tray (A) in the prewash compartment. It can be removed.

2 Powder and liquid detergent level indicator

3 When using powder detergent, the separator/dividertab should be lifted.

4 When using liquid detergent, the separator/dividertab should be lowered.

Symbolsofdetergentdispensercompartments
	prewash
	mainwash
	softening
	disinfectanttrayA

Detergents

INFORMATION!

Detergents carrying the environment protection label are less harmful to the environment.

Only add the detergents in compliance with the recommendations by detergent manufacturers.

Recommended amount of washing detergent at certain loads and water hardness levels are specified on the detergent packaging.

To correctly dose detergents, especially liquid ones, use the accessories provided by the detergent manufacturer.

INFORMATION!

We recommend adding powder detergent immediately before the washing cycle. If you add it sooner, make sure the detergent compartment in the dispenser tray is completely dry before adding the powder detergent: otherwise, the powder detergent may cake before the start of the washing process.

Suitable detergents

Only use detergents for machine washing.

When using thick liquid laundry care products, we recommend diluting them with water to prevent clogging the dispenser tray drain.

Liquid detergents are intended for washing programmes without a prewash cycle.

See chapter »WASHING PROCESS, STEP BY STEP (1-7)/3. Step: Recommendations for detergents under Regulation (EU) No. 1015/2010«.

You can use all modern detergents intended for household washing machines. The detergent packaging contains instructions for use and dosing, which apply to them a maximum amount of filling.

The detergent dosage depends on:

• how heavily soiled the laundry is; • the amount of laundry and water hardness.

Waterhardness	Hardnesslevels
				p.p.m.°fH(°F)mmol/l
				<150<15<15<8,41-s
2 - normal	8,4-14	1,5-2,5	15-25	150-250
				>250>25>25>143-h

INFORMATION!

Check the information on water hardness with your local water supply company or authority.

Dosing accessories

To correctly dose detergents, especially liquid ones, use the accessories provided by the detergent manufacturer.

Softeners

INFORMATION!

Pour the conditioner into the dispenser tray, into the compartment with the symbol. Observe the recommendation on the conditioner packaging.

INFORMATION!

Do not fill the conditioner compartment over the max. indication (maximum indicated level). Otherwise, the conditioner will be added to the laundry too soon, leading to poorer washing effect.

Stain removal tips

Before using special-purpose stain removers, try using the natural methods that do not harm the environment for less stubborn stains.

However, prompt action is required! Soak the stain with an absorbent sponge or a paper towel; then, rinse with cold (lukewarm) water - but never with hot water!

When using bleaches or stain removal agents, there is danger of rust (corrosion) and discolouration.

WARNING!

To protect the environment, we advise against using powerful chemicals.

	StainremovalStains
Mud	Whenthestainisdry,firstscrapeitoffthegarmentbeforewashingitinthe washingmachine.Ifthestainisstubborn,soakitwithanenzyme-basedstain removerbeforethewash.Ifthestainisnotstubborn,washthelaundrywith liquiddetergentorpowderdetergentandwaterbeforethewash.
Antiperspirant	Beforewashinginthewashingmachine,applyliquiddetergentontothelaundry. Applystainremoversonanystubbornstains.Alternatively,useoxygen-based bleachforthewash.
	Soakorrinsethelaundryincoldwaterandaddstainremoverifnecessary.Tea
Chocolate	Soakorrinsethelaundrywithlukewarmsoapywater.Then,applylemonjuice andrinse.
Ink	Beforewashinginthewashingmachine,applystainremoversonthestain.You mayalsousedenaturedalcohol.Turnthegarmentinsideoutandplaceapaper towelunderthestain.Usethealcoholonthebacksideofthestain.Attheend oftheprocess,thoroughlyrinsethegarment.
Felttippens	Dilutesomestarchinwaterandapplyittothestain.Whenitdries,scrapeitoff withabrush;then,washthegarmentinthewashingmachine.
Babyfood(urine, mud,foodstains)	Beforewashinginthewashingmachine,soakthestainsinlukewarmwaterfor atleasthalfanhour.Foreasierstainre-moval,addanenzyme-basedstain remover.
Grass	Beforewashinginthewashingmachine,soakthelaundryinanenzyme-based stainremover.Grassstainscanalsobere-movedbysoaking(forapprox.1 hour)indilutedlemonjuiceordistilledvinegar.
Eggs	Soakthegarmentinanenzyme-basedstainremover.Soakincoldwaterforat least30minutesorafewhoursifthestainsarestubborn.Then,washinthe washingmachine.
Coffee	Soakthegarmentinsaltwater.Ifthestainisnotfresh,soakitwithamixtureof glycerine,ammoniaandalcohol.
	Applycookingoiltothestainandrinse.Shoepolish
Blood	Freshstain-rinsethegarmentwithcoolwaterandwashinthewashing machine.Driedstain-soakthegarmentinanenzyme-basedstainremover.Then,wash inthewashingmachine.Ifthestaindoesnotvanish,trytoremoveitwitha bleachsuitableforyourgarment.
Glue,chewing gum	Placethegarmentinabagandputitinthefreezeruntilthestainhardens.Then,removeitwithabluntknife.Then,dilutethestainwithaprewashstainremover andrinsethoroughly.Then,washtelaundryasusual.
	Useastainremoverfortheprewash;then,washinthewashingmachine.Makeup
Butter	Beforewashinginthewashingmachine,applystainremovertothestain.Then,rinsewithhotwater(ashotasthefabricwillal-low).
Milk	Soakthegarmentinanenzyme-basedstainremover.Soakforatleast30 minutesorafewhoursifthestainsarestubborn.Then,washinthewashing machine.
Fruitjuice	Applyamixtureofsaltandwateronthestain.Leavetotakeeffectforawhile, thenrinse.Youcanapplysodiumbicarbonate,distilledvinegarorlemonjuice onthestainbeforewashinginthewashingmachine.Foroldstains,useglycerine.After20minutes,rinsewithcoldwater,thenwashthelaundryinthewashing machine.
Wine	Soakthelaundryincoldwaterforatleast30minutes.Also,useastainremover.Then,washinthewashingmachine.
Wax	Putthegarmentintothefreezeruntilthewaxhardens.Then,scrapeitoff.Removetheremainingwaxbyplacingapapertowelontothestain,andthenheatitwithanironuntilthepaperabsorbsthewax.
Sweat	Beforewashinginthewashingmachine,rubliquiddetergentthoroughlyinto thestain.

Low standby mode

If you do not run any program or choose any settings after switching on the washing machine (ON/OFF button (1)), the display unit will be switched off after 5 minutes and switched to stand-by mode in order to save energy.

The display unit will be reactivated if you rotate the programme selector knob (2) or press the ON/OFF button (1). If you do not do anything for 5 minutes after the end of a programme, the display unit will be switched off to save power.

	<0,5Po=weightedpowerwhenoff[W]
	<0,5PI=weightedpowerwheninstand
	5,00TI=standbytime[min]

INFORMATION!

Appliance with a wireless connection uses less than 2 W of electric energy in standby mode.

TYPICAL CONSUMPTION TABLE

(depending on the model)

INFORMATION!

The provided information is in accordance with EUR Regulation 2019/2023. The values indicated for programmes other than Eco40-60 have been determined in accordance with the applicable standard EN60456.

Explanation of symbols used below:
Ratedcapacity(kg)	Maximumtemperature(°C)5min (1)
Programmeduration(h:min) (1)	Remainingmoisturecontent(%) (1)
Energyconsumption(kWhpercycle) (1)	Spinspeed(rpm) (1)
(1)	EnergyefficiencyclassWaterconsumption(Lpercycle)
i the eco 40-60 programme at the rated capacity, half of the rated capacity and a quarter of the rated capacity; the20°Cprogrammeattheratedcapacityforthisprogramme;ii
iii onecottonprogrammeatnominaltemperaturehigherthanorequalto60°C(ifpresent)attheratedcapacity forthisprogramme;
iv oneprogrammeforothertextilesthancottonoramixoftextiles(ifpresent)attheratedcapacityforthis programme;
v one programme for the quick washing of lightly soiled laundry (if present) at the rated capacity for this programme;
vi one programme for heavily soiled textiles (if present) at the rated capacity for this programme;
(1) Duetotheinfluenceofwaterpressure,hardness,andinlettemperature,thetype,quantity,andsoilingofthe laundry,thedetergentused,powersupply,andselectedfunctions,theactualvaluesmaydifferfromthespecified values.
(2) Testprogramwithcoldwater(15°C)inaccordancewiththeEUDirectiveonEco-designandtheEURegulation onEnergyLabeling.
(3) Washingmachinetype,code,model,andserialnumbercanbefoundontherating(type)plateontheinner sideofthewashingmachinedoor. Fullload(FullLoad)FL

49cm/7kg,8kg:
	Program
i	Eco 40-60 (2)	7,0	03:27	0,620	50	30			A-10140053
				3,5	02:2345	50,200
				2,0	02:2333	30,180
				8,0	03:2860	1,100	140053 B
				4,0	02:2644	40,210
				2,5	02:2435	50,180
ii	Colour20°C(Colour)						02:201800,258
iii	Cottonwhite60°C(Cottonwhite)							12005560831,70303:0
iv	Mix40°C(Mixedlaundry/Synthetics)							10004242590,57402:2
v	Speed20'(Speed20')							10008129320,04500:2
vi	Cottonwhite60°C+waterplus(&water+)							12005560932,00003:0
(3)Dataappliesto:[PS22/62140] [PS22/67140] [PS22/62141] [PS22/67141] [PS22/62142] [PS22/67142] [PS22/62143] [PS22/67143] [PS22/62144] [PS22/67144]

49cm/JET/8kg:

	Program
i	(2)					3762	0,8750	3:388,0	Eco40-60
						20460	20000	2:334,0	A140053
						20350	18000	2:312,5
ii	Colour20°C(Colour)							120055	20880,19602::4
iii	Cottonwhite60°C(Cottonwhite)							120055	60881,73603::6
iv	Mix40°C(Mixedlaundry/Synthetics)							100035	42630,52602::4
v	Speed20'(Speed20')							100079	29320,04100::2
vi	Cottonwhite60°C+waterplus(&water+)							120055	60942,00003::6
(3)Dataappliesto:[PS22/67145][PS22/67146][PS22/67147][PS22/67148]

54cm/7kg,8kg:

	Program
i	(2)					3360	0,7600	3:328,0	Eco40-60
						2045	0,1900	2:454,0	A-10140053
						2035	0,1850	2:452,5
					600,83003	35/33	44/328,053	1600/1400	A

54cm/7kg,8kg:
	Program
					450,25002	454,0
					350,22002	452,5
						31520,6800	3:017,0
						25430,1850	2:333,5 A-101	40053
						24350,1800	2:312,0
ii	Colour20°C (Colour)							12005520850,18302::
iii	Cottonwhite60°C (Cottonwhite)							12005560871,80203::
iv	Mix40°C (Mixedlaundry/Synthetics)							10004342570,49702::
v	Speed20' (Speed20')							10007529320,04400::
vi	Cottonwhite60°C+waterplus (&water+)							120055601002,10003
(3)Dataappliesto: [PS22/63140] [PS22/64140] [PS22/63141] [PS22/64141] [PS22/63142] [PS22/64142] [PS22/63143] [PS22/64143] [PS22/63144] [PS22/64144] [PS22/63160] [PS22/64160][PS22/63161][PS22/64161][PS22/63162][PS22/64162][PS22/63163][PS22/64163][PS22/63164[PS22/64164]

54cm/JET/9kg:

	Program
i	(2)					32580,7300	3:329,0	Eco40-60
						22450,2300	2:454,5	A-101	40053
						23420,2700	2:452,5
ii	Colour20°C(Colour)							1200552085	0,22402::
iii	Cottonwhite60°C(Cottonwhite)							1200556084	1,99003::
iv	Mix40°C(Mixedlaundry/Synthetics)							1000414265	0,64102::
v	Speed20'(Speed20')							1000652933	0,04300::
vi	Cottonwhite60°C+waterplus(&water+)							1200556099	2,09603::
(3)Dataappliesto:[PS22/6D145][PS22/6D146][PS22/6D147][PS22/6D148]
60cm(64l)/10kg:
	Program
i	(2)					306	10,6800	3:3110,0	Eco40-60
						254	60,3000	2:365,0	A-20140053
						254	00,2500	2:342,5
ii	Colour20°C (Colour)							12005520920	16502::
iii	Cottonwhite60°C (Cottonwhite)							12005560992	10403::
iv	Mix40°C (Mixedlaundry/Synthetics)							10004142620	59402::
v	Speed20' (Speed20')							10007629320	04300::
vi	Cottonwhite60°C+waterplus (&water+)							1200556011	02,40003
(3)Dataappliesto: [PS22/6B140][PS22/6B141][PS22/6B142][PS22/6B143][PS22/6B144]

LABEL

(according to EU-Regulation No. 2019/2014)

QR code - I

Supplier's name or trademark - II

Supplier's model identifier - III

Scale of energy efficiency classes from A to G - IV

V - The energy efficiency class determined in accordance with point A of Annex II

VI - Weighted energy consumption in kWh per 100 cycles, rounded to the nearest integer in accordance with Annex IV. Rated capacity in kg for the eco 40-60 programme - VII

VI - Weighted water consumption per cycle (WW) in litres, rounded to the nearest integer in accordance with Annex IV

IX - Duration of the eco 40-60 programme at rated capacity in h:min, rounded to the nearest minute

X - Spin-drying efficiency class determined in accordance with point B of Annex II

XI - Airborne acoustic noise emissions during the spinning phase, expressed in dB(A) re 1 pW and rounded to the nearest integer, and the airborne acoustic noise emission class determined in accordance with point C of Annex II

XII – The number of this Regulation, that is, '2019/2014'

PRODUCT INFORMATION SHEET

(according to EU Regulation No. 2019/2014)

Supplier'snameortrademark:
Supplier'sadress( b):
Modelidentifier:
Generalproductparameters:
				ValueParameterValueParameter
Ratedcapacity( a)(kg)	x,x				xHeightDimer
					xWidth
					xDepth
W (a)			a)x,x[A/B/C/D/E/F/G]( °)Energyeffic
Washingefficiencyindex (a)	x,xxx		Rinsingeffectiveness(g/kg) (a)	x,x
Energyconsumptionin kWhercycle,forthe'eco 40-60'programme.Actual energyconsumptionwill dependonhowthe applianceisused.	x,xxx		Waterconsumptioninlitre percycle,basedonthe 'eco40-60'programme. Actualwaterconsumption willdependonhowthe applianceisusedandon thehardnessofthewater.	x
Maximumtemperature insidethetreatedtextile( a) (°C)	Rated capacity	x	Remainingmoisture content(a)(%) Ratedcapacity	x,x Ratedcapacity
	Half Rated capacity	x
	Quarter Rated capacity	x
Spinspeed( a)(rpm)	Rated capacity	x	Spin-dryingefficiencyclass (a)	[A/B/C/D/E/F/G]( °)
		xHalf
		xQuarter
Programmeduration( a) (h:min)	Rated capacity	x:xx	Type Half Quarter	[built-in/free standing]
		x:xxHalf
		x:xxQ
Airborneacousticalnoise emissionsinthespinning phase( a)(dB(A)re1pW)	x		Airborneacousticalnoise emissionsclass( a) (spinningphase)	[A/B/C/D]( °)
				x,xxStandbymode(W)
Delaystart(W) (ifapplicable)	x,xx		Networkedstandby(W) (ifapplicable)	x,xx
Minimumdurationoftheguaranteeofferedbythesupplier( b):

Thisproducthasbeendesignedtorelease silverionsduringthewashingcycle	[YES/NO]
Additionalinformation:
Weblinktothesupplier’swebsite,wheretheinformationinpoint9ofAnnexIltoCommission Regulation(EU)2019/2023(1)(b)isfound:

(a) For the »eco 40-60« programme.

(b) Changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369.

If the product database automatically generates the definitive content of this cell, the supplier shall not enter these data.

1) Commission Regulation (EU) 2019/2023 of 1 October 2019 laying down ecodesign requirements for household washing machines and household washer-dryers pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1015/2010 (see page 285 of this Official Journal).

DISPOSAL

Packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately.

The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. Take the product to an authorized collection centre for waste electric and electronic equipment processing.

When disposing of the appliance at the end of its useful life, remove all power cords, and destroy the door latch and switch to prevent the door from locking or latching (child safety).

Correct disposal of the product will help prevent any negative effects on the environment and health of people, which could occur in case of incorrect product removal. For detailed information on removal and processing of the product, please contact the relevant municipal body in charge of waste management, your waste disposal service, or the store where you bought the product.

gorenje

GORENJE gospodinjski aparati, d.o.o. Address: Partizanska 12, 3320 Velenje, Slovenia Phone: [phone] Fax: [phone] www.gorenje.com

PS22B2+SHWGOR

910915-a9

CE