American DJ

RGBW4C IR - Lighting American DJ - Free user manual and instructions

Find the device manual for free RGBW4C IR American DJ in PDF.

📄 10 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice American DJ RGBW4C IR - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Wash Light
Model RGBW4C IR
Brand American DJ
Light Source 4 x 10W RGBW LEDs (4-in-1)
Beam Angle 25 degrees
DMX Channels 4, 5, or 8 selectable
Control Protocols DMX512, IR remote, Sound Active, Master/Slave
Dimensions 10.2 x 9.5 x 9.8 inches (260 x 241 x 249 mm)
Weight 4.5 lbs (2.0 kg)
Power Input AC 100-240V, 50/60Hz
Power Consumption 60W max
Fuse Rating 1A 250V
Cooling System Convection cooled (no fans)
Housing Material Metal and high-temperature plastic
Mounting Options Floor standing or hanging via included bracket
Operating Temperature 14°F to 104°F (-10°C to 40°C)
IP Rating IP20 (indoor use only)
Included Accessories IR remote, power cord, mounting bracket, user manual
Maintenance Clean lens with a soft, dry cloth; periodic inspection
Repairability LEDs not user-serviceable; replace entire module if needed

Frequently Asked Questions - RGBW4C IR American DJ

How do I set the DMX address on the RGBW4C IR?
Press the Menu button until the DMX address is displayed, then use Up/Down to set the address. Press Enter to confirm.
Can I control this fixture without a DMX controller?
Yes, you can use the included IR remote for basic control of colors, brightness, and built-in programs.
How many DMX channels does the RGBW4C IR use?
It supports three channel modes: 4-channel (RGBW), 5-channel (RGBW + dimmer), and 8-channel (full control including color macros and strobe).
What should I do if the fixture does not respond to DMX?
Check that the DMX cables are properly connected and the address is set correctly. Ensure the controller is sending data and the fixture is set to DMX mode.
How do I use the Sound Active mode?
Press the Menu button until 'SOUN' appears, then press Enter. The fixture will react to music via its built-in microphone. Adjust sensitivity using Up/Down.
Is the RGBW4C IR suitable for outdoor use?
No, this fixture is rated IP20 and is intended for indoor use only. Keep it away from moisture and dust.
How do I clean the fixture?
Disconnect power and allow to cool. Use a soft, lint-free cloth to gently wipe the lens and housing. Do not use abrasive cleaners or solvents.
What is the maximum number of fixtures I can daisy-chain?
You can connect up to 32 fixtures in a DMX daisy chain. For longer runs, use a DMX terminator.
How do I reset the fixture to factory defaults?
While in the menu, navigate to 'dEFA' and press Enter. Then select 'rES' and confirm. The fixture will reset to default settings.
Can I replace the LEDs myself?
The LEDs are not user-serviceable. If an LED fails, contact American DJ support or an authorized service center for replacement.

User questions about RGBW4C IR American DJ

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual RGBW4C IR - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RGBW4C IR by American DJ.

USER MANUAL RGBW4C IR American DJ

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : American DJ

Model : RGBW4C IR

Category : Lighting