PAR Z120 RGBW - Lighting American DJ - Free user manual and instructions
Find the device manual for free PAR Z120 RGBW American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Model | PAR Z120 RGBW |
| Brand | American DJ |
| Light Source | 120W RGBW LED |
| Color Mixing | RGBW (Red, Green, Blue, White) |
| Beam Angle | 25 degrees |
| DMX Channels | 4/8 selectable |
| DMX Connectors | 3-pin XLR in/out |
| Control Modes | DMX-512, Standalone, Master/Slave, Sound Active |
| Power Consumption | 120W |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions | 11.0 x 10.6 x 12.2 inches (279 x 269 x 310 mm) |
| Weight | 7.7 lbs (3.5 kg) |
| Housing Material | Aluminum / Steel |
| Cooling | Passive convection |
| Operating Temperature | 14°F to 113°F (-10°C to 45°C) |
| IP Rating | IP20 (indoor use only) |
| Included Accessories | Power cord, mounting bracket, user manual |
| Maintenance | Clean with dry cloth; ensure ventilation slots are unobstructed |
| Safety | Disconnect power before servicing; do not expose to rain or moisture |
| Spare Parts Available | LED module, power supply, fuse, DMX connectors |
Frequently Asked Questions - PAR Z120 RGBW American DJ
How do I set the DMX address on my PAR Z120 RGBW?
Use the control panel buttons to enter the DMX address setting mode. Press Menu until 'A001' appears, then use Up/Down to set the address. Press Enter to confirm.
Can I use this fixture in outdoor events?
No, the PAR Z120 RGBW has an IP20 rating and is designed for indoor use only. Do not expose it to rain or moisture.
How do I reset the fixture to factory defaults?
Press and hold the Menu button for 5 seconds until the display shows 'dEFA', then press Enter to reset.
What power cable do I need?
The fixture comes with a standard IEC power cord. It operates on AC 100-240V, 50/60Hz, so you may need a plug adapter for different regions.
How do I clean the lens?
Use a soft, dry cloth to gently wipe the lens. Avoid using liquids or abrasive cleaners that could damage the coating.
Can I daisy-chain multiple PAR Z120 units?
Yes, the fixture has DMX in/out (3-pin XLR) and powerCON compatible inputs/outputs allowing you to daisy-chain power and data to multiple units.
What is the maximum ambient temperature for operation?
The safe operating ambient temperature range is 14°F to 113°F (-10°C to 45°C). Avoid using in extreme heat or cold.
How do I switch between 4-channel and 8-channel DMX modes?
Press Menu until 'ChNd' appears, then use Up/Down to select either '4CH' or '8CH'. Press Enter to save.
What does the 'SLNd' mode do?
'SLNd' is Slave mode. Set one unit as master and others as slave to synchronize patterns without a DMX controller.
The fixture is not responding to DMX. What should I check?
Ensure the DMX cable is properly connected and not faulty. Check that the DMX address is set correctly and that the controller is sending data. Also verify that the fixture is in DMX mode (not standalone).
User questions about PAR Z120 RGBW American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual PAR Z120 RGBW - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAR Z120 RGBW by American DJ.