The Box TA12 - Speaker

TA12 - Speaker The Box - Free user manual and instructions

Find the device manual for free TA12 The Box in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice The Box TA12 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Active PA Speaker
Model TA12
Brand The Box
Woofer 12" (30 cm)
Tweeter 1" (25 mm) compression driver
Power Output (RMS) 200 W
Peak Power 400 W
Frequency Response 55 Hz – 20 kHz
Impedance 8 Ω
Sensitivity 96 dB SPL
Dimensions (H x W x D) 40 x 35 x 60 cm
Weight 15 kg
Enclosure Material Plywood with carpet covering
Mounting 35 mm pole mount socket
Input Connectors XLR and 1/4" combo jack
Controls Volume, EQ (treble/bass)
Protection Features Overload, thermal, and short-circuit protection
Power Supply AC 110-240 V, 50/60 Hz
Accessories Included Power cable, user manual
Cleaning Instructions Wipe with a dry cloth; avoid solvents
Safety Certifications CE, RoHS
Repairability Replaceable amplifier module and drivers

Frequently Asked Questions - TA12 The Box

How do I connect the TA12 speaker to a mixer?
Use a balanced XLR or 1/4" TRS cable from the mixer's output to the speaker's input. Make sure the speaker is powered off when connecting.
What is the power output of the TA12?
The TA12 delivers 200 W RMS and 400 W peak power, suitable for small to medium venues.
Can the TA12 be used as a floor monitor?
Yes, the speaker can be placed on its side as a wedge monitor. Ensure the pole mount is not obstructed.
How to clean the speaker cabinet?
Wipe the cabinet with a soft dry cloth. Do not use water, solvents, or abrasive cleaners.
What should I do if there is no sound from the speaker?
Check power connections, verify the input cable is properly connected, and ensure the volume is turned up. Also check that the mixer is sending a signal.
Does the TA12 have Bluetooth connectivity?
No, the TA12 does not support Bluetooth. It requires a wired audio connection via XLR or 1/4" jack.
How do I mount the speaker on a stand?
Place the speaker on a 35 mm pole stand using the built-in socket. Ensure the stand is stable and the speaker is secured with a safety strap if possible.
What is the coverage angle of the TA12?
The TA12 typically provides a 90° x 60° coverage pattern (horizontal x vertical).
How to avoid feedback when using a microphone?
Position the speaker in front of the microphone, reduce gain, and use an equalizer to notch out feedback frequencies. Keep the microphone away from the speaker.
Where can I find spare parts for the TA12?
Spare parts such as speakers and amplifier modules can be ordered from authorized service centers. Contact The Box support for assistance.

User questions about TA12 The Box

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Speaker in PDF format for free! Find your manual TA12 - The Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TA12 by The Box.

USER MANUAL TA12 The Box

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : The Box

Model : TA12

Category : Speaker