PA 110 A - Speaker The Box - Free user manual and instructions
Find the device manual for free PA 110 A The Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active PA Speaker |
| Brand | The Box |
| Model | PA 110 A |
| Dimensions (W x H x D) | 30 cm x 50 cm x 28 cm |
| Weight | 10 kg |
| Power Output (RMS) | 200 W |
| Peak Power | 400 W |
| Frequency Response | 50 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 95 dB (1W/1m) |
| Driver Size | 10" woofer, 1" tweeter |
| Amplifier Type | Class D |
| Input Connectors | XLR, 1/4" Jack, RCA |
| Output Connectors | XLR Link Out |
| Mounting Options | Pole mount (35 mm), floor monitor angle |
| Enclosure Material | Plywood with black carpet finish |
| Grille | Steel grille with acoustic foam |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 250 W |
| Protection Features | Overload, thermal, short circuit |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Safety | Use grounded outlet; avoid exposure to rain |
| Spare Parts Availability | Contact manufacturer or authorized dealer |
Frequently Asked Questions - PA 110 A The Box
How do I connect the PA 110 A to a mixer?
Use a balanced XLR cable from the mixer output to the XLR input on the speaker. Alternatively, you can use a 1/4" TRS jack cable.
What is the maximum power handling of the PA 110 A?
The speaker has a peak power handling of 400 W and RMS power of 200 W. Ensure the amplifier output does not exceed these ratings.
Can I use the PA 110 A as a floor monitor?
Yes, the speaker can be placed on its side as a floor monitor. It has a trapezoidal shape and a monitor angle for that purpose.
How do I clean the PA 110 A?
Unplug the speaker and wipe the enclosure with a dry, lint-free cloth. Do not use any solvents or abrasive cleaners. The grille can be vacuumed gently.
What should I do if the speaker does not produce sound?
Check the power connection, ensure the volume knob is turned up, verify the audio source and cables. Also check if the protection LED is lit; if so, reduce the input level or allow the speaker to cool down.
Is the PA 110 A suitable for outdoor use?
The speaker is not weatherproof. Avoid exposure to rain or extreme humidity. Use a cover if necessary.
What type of power cable does the PA 110 A use?
It uses a standard IEC power cord (C13 connector). It can operate on voltages from 100V to 240V AC.
How can I mount the PA 110 A on a speaker stand?
Insert the speaker's bottom pole mount (35 mm) onto a compatible speaker stand. Ensure the stand is stable and the locks are engaged.
What are the dimensions of the PA 110 A?
Approximately 30 cm wide, 50 cm high, and 28 cm deep. Weight is about 10 kg.
How do I update the firmware on the PA 110 A?
The PA 110 A does not have user-updatable firmware. If issues arise, contact The Box support.
User questions about PA 110 A The Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual PA 110 A - The Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA 110 A by The Box.
USER MANUAL PA 110 A The Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : The Box
Model : PA 110 A
Category : Speaker