Q99 - Receiver ELECTRO-VOICE - Free user manual and instructions
Find the device manual for free Q99 ELECTRO-VOICE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UHF Wireless Receiver |
| Brand | Electro-Voice |
| Model | Q99 |
| Frequency Range | 470-542 MHz / 584-608 MHz (varies by region) |
| Number of Channels | Up to 100 selectable frequencies |
| Audio Output | XLR balanced and 1/4" unbalanced |
| Dimensions (W x H x D) | 19 x 1.75 x 8 inches (rackmount 1U) |
| Weight | Approx. 4.5 lbs (2.04 kg) |
| Power Supply | 12-18V DC, 500 mA (external adapter included) |
| Main Functions | Wireless microphone signal reception, frequency scanning, squelch control, audio level adjustment |
| Maintenance & Cleaning | Clean with dry cloth; avoid liquids. Keep vents clear of dust. |
| Safety | Operate in dry conditions; do not expose to moisture. Use only supplied power adapter. |
| Spare Parts & Repairability | Contact authorized service centers for replacement antennas, power adapters, or internal repairs. |
| General Information | Designed for professional audio use; compatible with Electro-Voice wireless microphone systems. |
Frequently Asked Questions - Q99 ELECTRO-VOICE
How do I connect the Q99 receiver to my mixer?
Use an XLR cable from the receiver's balanced output to a mixer input, or a 1/4" cable for unbalanced connections. Set the receiver volume to mid-level and adjust gain on the mixer.
How do I perform a frequency scan on the Q99?
Press the SCAN button on the front panel. The receiver will search for clear frequencies and display the best one. Press SET to confirm.
What should I do if I lose signal often?
Check that antennas are properly attached and positioned. Ensure line-of-sight between transmitter and receiver. Avoid metal obstructions and other wireless sources.
Can I use the Q99 with other brands of microphones?
The Q99 is designed for Electro-Voice wireless systems. Compatibility with other brands is not guaranteed due to different frequency bands and modulation.
How do I adjust squelch on the Q99?
Locate the squelch control (often a small knob or button). Turn it clockwise to increase squelch (reduces noise) or counterclockwise to decrease (allows weaker signals).
What type of antennas does the Q99 use?
It uses standard BNC connectors for external antennas. Typically, 1/2-wave whip antennas are included, but directional or active antennas can be used.
How do I clean the Q99 receiver?
Disconnect power and use a soft dry cloth to wipe the exterior. Do not use any liquids or sprays. Vacuum ventilation slots if dusty.
What does the RF/AF meter indicate?
RF (Radio Frequency) shows signal strength from the transmitter. AF (Audio Frequency) shows audio level being transmitted. Ideally both should be in the green zone.
Can I mount the Q99 in a rack?
Yes, it is 1U rackmountable. Attach the supplied rack ears to the sides and secure with screws in a standard 19-inch rack.
How do I update firmware on the Q99?
Firmware updates are done via USB connection (if available) or by a service center. Check Electro-Voice website for updates and instructions.
User questions about Q99 ELECTRO-VOICE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Q99 - ELECTRO-VOICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Q99 by ELECTRO-VOICE.
USER MANUAL Q99 ELECTRO-VOICE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTRO-VOICE
Model : Q99
Category : Receiver