ECS2528FP - Switch ENGENIUS - Free user manual and instructions
Find the device manual for free ECS2528FP ENGENIUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Model | ECS2528FP |
| Brand | EnGenius |
| Number of Ports | 28 (24 x 10/100/1000 PoE+ + 4 x SFP+) |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 370W |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | Yes (up to 4096 VLANs) |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (17.32 x 7.87 x 1.73 in) |
| Weight | 3.5 kg (7.72 lbs) |
| Power Supply | 100-240V AC, 50-60Hz, 7A max |
| Power Consumption | 450W (max with PoE) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5% to 95% (non-condensing) |
| Mounting | Rack-mountable (1U), desktop |
| Management Features | Web GUI, SNMP v1/v2c/v3, CLI, Telnet, SSH, VLAN, QoS, IGMP snooping |
| Safety Compliance | CE, FCC, RoHS |
| Warranty | 5 years limited |
| Maintenance | Clean with a soft dry cloth; avoid liquids and aerosols. |
| Accessories Included | Power cord, rack-mount kit, console cable, quick start guide |
| Repair Policy | Not user-serviceable. Contact EnGenius support for RMA. |
Frequently Asked Questions - ECS2528FP ENGENIUS
How do I reset the switch to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the switch is powered on. The system will reboot with default settings.
What PoE power budget does the ECS2528FP support?
The total PoE power budget is 370W, sufficient to power devices like IP cameras, VoIP phones, and wireless access points.
How can I access the web management interface?
Connect your PC to any port, set a static IP in the 192.168.1.x subnet (e.g., 192.168.1.100), and browse to 192.168.1.1 (default IP). Login with admin/admin.
Can I use the SFP+ ports for 10GbE connections?
Yes, the SFP+ ports support 1GbE and 10GbE SFP+ modules (sold separately). They are uplink ports for high-speed connections.
What is the maximum VLAN count?
The switch supports up to 4096 VLANs (802.1Q VLAN tagging) and can have up to 256 active VLAN interfaces.
How do I update the firmware?
Download the latest firmware from EnGenius support website. In the web GUI, go to Maintenance > Firmware Upgrade, select the file, and start the update. Do not power off during upgrade.
Why are my PoE devices not powering on?
Check that the total power draw does not exceed the 370W budget. Ensure the port PoE is enabled in the GUI (under Port Configuration). Also verify the device is 802.3af/at compliant.
Does the switch support link aggregation?
Yes, it supports up to 8 LAG groups with up to 8 ports per group (static or LACP). Configure via the web interface under Switching > Link Aggregation.
What is the default username and password?
The default credentials are username: admin and password: admin. It is recommended to change them immediately after first login.
Can the switch be used for voice VLAN?
Yes, the switch supports Voice VLAN feature (LLDP-MED) to automatically assign VoIP phones to a dedicated VLAN. Enable it under VLAN > Voice VLAN.
User questions about ECS2528FP ENGENIUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ECS2528FP - ENGENIUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ECS2528FP by ENGENIUS.
USER MANUAL ECS2528FP ENGENIUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ENGENIUS
Model : ECS2528FP
Category : Switch