ECS2552FP - Switch ENGENIUS - Free user manual and instructions
Find the device manual for free ECS2552FP ENGENIUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Brand | EnGenius |
| Model | ECS2552FP |
| Number of Ports | 52 (48x Gigabit PoE+ + 4x SFP+ Uplink) |
| PoE Budget | 740W total |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Dimensions (WxDxH) | 440 x 370 x 44 mm (1U) |
| Weight | 6.2 kg |
| Power Supply | Internal AC 100-240V, 50-60Hz |
| Max Power Consumption | 780W (including PoE) |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, VLAN, QoS, IGMP Snooping |
| Layer | Layer 2+ (Static Routing) |
| Fan | 3 x smart fans, speed auto-controlled |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Safety Certifications | CE, FCC, RoHS |
| Warranty | Limited lifetime (terms apply) |
Frequently Asked Questions - ECS2552FP ENGENIUS
How do I access the web interface of the ECS2552FP?
Connect a computer to any port, set an IP in the same subnet (default: 192.168.1.1 subnet mask 255.255.255.0), open browser to 192.168.1.1, login with admin/admin.
What is the PoE budget and how is it distributed?
The total PoE budget is 740W. Each port can deliver up to 30W (PoE+). The switch automatically manages power allocation.
Does the ECS2552FP support VLANs?
Yes, it supports IEEE 802.1Q VLAN tagging, up to 4094 VLANs, with port-based and tagged/untagged configurations.
How can I reset the switch to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds using a paperclip. The switch will reboot with factory settings.
What is the maximum cable length for PoE?
For standard Cat5e or better cable, the maximum length is 100 meters per segment.
Can I use the SFP+ ports for stacking?
The ECS2552FP does not support physical stacking; however, SFP+ ports can be used for 10G uplinks or link aggregation (LACP).
How do I enable QoS on the switch?
Go to QoS > CoS or DSCP settings in the web GUI. You can configure priority queues (8 queues) and assign traffic classes based on VLAN, port, or DSCP.
What does the LED status mean?
Power LED: green (on), off (off). Port LEDs: solid green (link at 1000M), flashing green (activity), amber (link at 10/100M), off (no link). PoE LED: green when PoE active.
Is the fan loud?
The switch has smart fans that adjust speed based on temperature. Under normal load, they are quiet; under high load or high ambient temp, they may become audible but remain within 40 dBA.
How do I update the firmware?
Download the latest firmware from EnGenius support site. In the web GUI, go to Maintenance > Firmware Upgrade, upload the file, and the switch will reboot.
User questions about ECS2552FP ENGENIUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ECS2552FP - ENGENIUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ECS2552FP by ENGENIUS.
USER MANUAL ECS2552FP ENGENIUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ENGENIUS
Model : ECS2552FP
Category : Switch