Core Club - DJ Equipment DAP-Audio - Free user manual and instructions
Find the device manual for free Core Club DAP-Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional DJ Mixer |
| Model | Core Club |
| Brand | DAP-Audio |
| Dimensions (W x D x H) | 320 mm x 280 mm x 90 mm |
| Weight | 2.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz via external adapter |
| Power Consumption | 15 W |
| Number of Channels | 2 |
| Inputs | 2x RCA (Line), 2x XLR (Mic), 1x RCA (AUX) |
| Outputs | 2x RCA (Master), 1x XLR (Balanced Master), 1x Jack 6.3 mm (Phones) |
| Equalizer | 3-band EQ (High, Mid, Low) per channel |
| Crossfader | Replaceable, 45 mm travel |
| Preamplifier | Built-in mic preamp with adjustable gain |
| Signal-to-Noise Ratio | >90 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Distortion (THD) | <0.05% |
| Crosstalk | < -70 dB |
| Housing Material | Steel chassis with aluminum front panel |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Do not use solvents or water. |
| Safety | Do not open device. Use only supplied power adapter. Keep away from moisture. |
| Spare Parts & Repairability | Contact authorized service center. Crossfader replacement possible with standard part. |
| General Information | Professional 2-channel DJ mixer designed for club and mobile use. |
Frequently Asked Questions - Core Club DAP-Audio
How do I connect turntables to the Core Club?
Use RCA cables to connect your turntables to the Line inputs (channel 1 or 2). Ensure your turntable has a built-in preamp or use an external phono preamp.
What power supply does the Core Club require?
The mixer uses an external power adapter rated for 12V DC, 1A. The input is 100-240V AC, 50/60 Hz.
Can I use a microphone with the Core Club?
Yes, connect a dynamic microphone to the XLR mic input. The mic channel has its own gain control and 2-band EQ.
How do I connect headphones?
Plug your headphones into the 1/4-inch (6.3 mm) jack on the front panel. Use the Cue buttons to select which channel you hear.
Why is there no sound from the master output?
Check that the Master volume is turned up, and that the channel faders and crossfader are open. Also verify your speakers are powered and connected properly.
How do I replace the crossfader?
The crossfader is a standard size and can be replaced. Unscrew the front panel, remove the old fader, and install a new one. Contact DAP-Audio support for compatible parts.
Can I record from the Core Club?
Yes, use the Record output (RCA) to connect to a recording device or sound card. This output is pre-master fader.
Is the Core Club compatible with DJ software?
The Core Club is an analog mixer without a built-in soundcard. To use with software like Serato, you need an external audio interface.
How do I clean the mixer?
Use a soft, dry cloth to wipe the surface. Do not use water, alcohol, or abrasive cleaners. Avoid getting liquids into the faders and knobs.
What is the warranty period for the Core Club?
DAP-Audio provides a 2-year limited warranty covering manufacturing defects. Register your product on the official website for support.
User questions about Core Club DAP-Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual Core Club - DAP-Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Core Club by DAP-Audio.
USER MANUAL Core Club DAP-Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAP-Audio
Model : Core Club
Category : DJ Equipment