PA-380TU - Hi-Fi System DAP-Audio - Free user manual and instructions
Find the device manual for free PA-380TU DAP-Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Integrated Stereo Amplifier / Hi-Fi System |
| Model | PA-380TU |
| Brand | DAP-Audio |
| Dimensions (W x H x D) | 430 x 145 x 340 mm |
| Weight | 8.5 kg |
| Power Output | 2 x 100W RMS (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz ±1 dB |
| Total Harmonic Distortion | < 0.05% |
| Inputs | 3x RCA, 1x Phono, 1x Optical, 1x Coaxial, Bluetooth |
| Outputs | Speaker binding posts, 1x Subwoofer Pre-Out, 1x Headphone |
| Radio Tuner | FM/AM digital tuner with 30 presets |
| Remote Control | Included (CR2025 battery) |
| Power Supply | AC 100-240V, 50/60 Hz, 350W max |
| Standby Power Consumption | < 0.5W |
| Supported Audio Formats | MP3, WMA, WAV, FLAC (via USB) |
| USB Playback | USB-A port for music playback (FAT32) |
| Speaker Impedance | 4-16 ohms |
| Cleaning | Use a dry soft cloth; avoid solvents or abrasive cleaners |
| Safety Features | Overload protection, short circuit protection, thermal shutdown |
| Spare Parts Availability | Contact DAP-Audio support for service parts |
| Repairability Index | Rating: 8.5/10 (easy to service) |
| General Information | Designed for home audio; includes user manual, warranty card |
Frequently Asked Questions - PA-380TU DAP-Audio
How do I connect the speakers to the PA-380TU?
Connect the speaker wires to the binding posts on the rear panel. Ensure proper polarity: red to positive (+) and black to negative (-). Tighten the posts securely.
Can I use the PA-380TU with a turntable?
Yes, the PA-380TU has a dedicated Phono input with built-in RIAA equalization for moving magnet (MM) cartridges.
How do I set up the FM radio?
Connect the FM antenna (included) to the FM antenna input. Press the TUNER button on the remote or front panel, then use the tuning knob or auto-scan to find stations.
What should I do if there is no sound output?
Check that the speakers are properly connected and the input source is selected correctly. Also verify that the volume is not muted and the amplifier is not in standby mode.
How can I reset the PA-380TU to factory settings?
Turn off the unit. Then press and hold the 'Power' button and the 'Source' button simultaneously for 5 seconds until 'RESET' appears on the display.
Does the PA-380TU support Bluetooth?
Yes, it has aptX Bluetooth for high-quality wireless streaming from smartphones, tablets, or computers.
What is the maximum power output of the PA-380TU?
The amplifier delivers 2 x 100W RMS into 8 ohms, and can handle up to 2 x 150W RMS into 4 ohms.
Can I connect a subwoofer?
Yes, there is a Subwoofer Pre-Out RCA jack. Connect it to an active subwoofer for enhanced bass.
How do I clean the PA-380TU?
Unplug the unit and wipe the exterior with a dry, soft cloth. Do not use any chemical cleaners or liquids.
Where can I find spare parts or service for my PA-380TU?
Contact DAP-Audio customer support or visit their official website for authorized service centers and spare parts availability.
User questions about PA-380TU DAP-Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual PA-380TU - DAP-Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA-380TU by DAP-Audio.
USER MANUAL PA-380TU DAP-Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAP-Audio
Model : PA-380TU
Category : Hi-Fi System