LUB-27 - Switch Omnitronic - Free user manual and instructions
Find the device manual for free LUB-27 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Switch |
| Brand | Omnitronic |
| Model | LUB-27 |
| Dimensions (W x H x D) | 483 x 44 x 150 mm (19", 1U) |
| Weight | Approx. 1.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 15 W max |
| Input Connectors | PowerCon (or IEC) input |
| Output Connectors | 8x Schuko or PowerCon outputs |
| Control | Manual on/off switches per channel |
| Protection | Overload and short-circuit protection |
| Housing | Metal, rack-mountable |
| Operating Temperature | 0°C to 40°C |
| Safety Features | Ground connection, fuse protection |
| LED Indicators | Power and channel status LEDs |
| Cleaning | Use dry cloth; disconnect power before cleaning |
| Intended Use | Switching lighting and stage equipment |
| Accessories Included | Power cord, rack ears, user manual |
Frequently Asked Questions - LUB-27 Omnitronic
How do I connect the LUB-27 to a power source?
Connect the included power cord to the AC input on the rear panel and plug it into a mains outlet. Ensure the voltage matches your local supply (100-240V).
Can I use the LUB-27 for dimming lights?
No, the LUB-27 is a switching unit only. It provides on/off control, not dimming. For dimming, you need a compatible dimmer pack.
What is the maximum load per channel?
Each channel can handle up to 10A (resistive load). For inductive loads, derate to 5A. Refer to the manual for exact specifications.
How do I mount the LUB-27 in a rack?
Attach the included rack ears to the sides using the provided screws. Then secure the unit in a 19-inch rack using four rack screws (not included).
Why is the power LED not lighting up?
Check that the power cord is firmly connected and the mains outlet is live. Also, verify the internal fuse is intact. If blown, replace with same type and rating.
Can I daisy-chain multiple LUB-27 units?
Yes, if your model has a through output (PowerCon thru). Otherwise, use separate power feeds. Do not exceed total load on a single circuit.
How do I clean the LUB-27?
Disconnect the unit from power. Use a soft, dry cloth to wipe the surface. Do not use liquids or abrasive cleaners.
What should I do if a channel switch is stuck?
Do not force it. Contact Omnitronic support or a qualified technician for repair. Continuing to use a faulty switch may cause damage.
Is the LUB-27 suitable for outdoor use?
No, it is designed for indoor use only. Keep it away from moisture, rain, and extreme temperatures.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version via the website.
User questions about LUB-27 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual LUB-27 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LUB-27 by Omnitronic.
USER MANUAL LUB-27 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : LUB-27
Category : Switch