EP-220PS - Mixer Omnitronic - Free user manual and instructions
Find the device manual for free EP-220PS Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Channel DJ Mixer |
| Channels | 2 (Phono/Line switchable) |
| Inputs | 2x RCA (Phono/Line), 1x 1/4" (Mic), 1x 3.5mm (Aux) |
| Outputs | 2x RCA (Master), 1x 1/4" (Headphone) |
| Equalizer | 3-band (High, Mid, Low) per channel |
| Crossfader | Replaceable crossfader |
| Dimensions (W x D x H) | 180 x 150 x 50 mm |
| Weight | 0.8 kg |
| Power Supply | 12V DC, 500 mA (adapter included) |
| Power Consumption | 6 W |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 80 dB |
| Total Harmonic Distortion | < 0.05% |
| Input Sensitivity (Phono) | 2.5 mV |
| Input Sensitivity (Line) | 150 mV |
| Headphone Impedance | 32 Ω |
| Material | Metal chassis, plastic knobs |
| Care and Cleaning | Wipe with dry cloth; avoid liquids |
| Safety | Do not expose to moisture; use only provided power adapter |
| Spare Parts and Repairability | Replaceable crossfader; service by qualified personnel |
| General Information | For DJ and home use; compatible with turntables and media players |
Frequently Asked Questions - EP-220PS Omnitronic
What is the Omnitronic EP-220PS?
The Omnitronic EP-220PS is a 2-channel DJ mixer designed for mixing audio from turntables, media players, and microphones.
How do I connect turntables?
Connect turntables to the RCA inputs with the switch set to Phono. Ensure turntables have a built-in preamp or use an external one.
Can I connect a microphone?
Yes, the EP-220PS has a 1/4" microphone input with volume control.
How do I connect headphones?
Connect headphones to the 1/4" headphone output on the front panel. Use the cue buttons to preview channels.
What power adapter do I need?
The mixer requires a 12V DC, 500 mA power adapter with a center-positive tip. Use only the included adapter.
How do I clean the mixer?
Unplug the unit and wipe with a soft, dry cloth. Do not use liquids or abrasive cleaners.
Why is there no sound?
Check that all cables are properly connected, the power is on, and the master volume is turned up. Also ensure the input channel faders are raised.
Can I use this mixer for recording?
Yes, you can connect the master output to a recorder's line input. Use standard RCA cables.
How do I replace the crossfader?
The crossfader is replaceable. Open the bottom panel, disconnect the old fader, and install a new compatible one. Refer to the manual for detailed steps.
Is there a warranty?
The Omnitronic EP-220PS comes with a standard 2-year warranty against manufacturing defects. Retain your purchase receipt.
User questions about EP-220PS Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual EP-220PS - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EP-220PS by Omnitronic.
USER MANUAL EP-220PS Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : EP-220PS
Category : Mixer