DB-1 - Multimeter Sonel - Free user manual and instructions
Find the device manual for free DB-1 Sonel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Sonel |
| Model | DB-1 |
| Dimensions (approx.) | 180 x 85 x 50 mm |
| Weight (approx.) | 300 g (with battery) |
| Power Supply | 9V battery (6F22 type) |
| Display | LCD, 3½ digits, 2000 counts |
| AC Voltage Range | 200 mV to 600 V |
| DC Voltage Range | 200 mV to 600 V |
| AC Current Range | 200 µA to 10 A |
| DC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 20 MΩ |
| Continuity Test | Yes, with buzzer |
| Diode Test | Yes |
| Transistor Test | Yes (hFE) |
| Safety Rating | CAT II 600V, CAT III 300V |
| Overload Protection | Built-in fuse (10A/250V, 0.2A/250V) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Relative Humidity | ≤75% (non-condensing) |
| Accessories Included | Test leads, 9V battery, manual |
| Maintenance | Clean with damp cloth; no solvents |
| Spare Parts / Repairability | Replaceable fuse, battery, test leads |
Frequently Asked Questions - DB-1 Sonel
How do I measure AC voltage with the Sonel DB-1?
Set the rotary switch to the ACV range. Connect the black lead to COM and red lead to VΩmA. Touch the probes to the circuit. Read the voltage on the display.
What does the 'Ω' symbol mean on the multimeter?
The Ω symbol indicates the resistance measurement function. Select the appropriate range to measure resistance in ohms.
How do I replace the battery in the Sonel DB-1?
Turn off the meter. Remove the screw at the back and lift the battery compartment cover. Replace the 9V battery (6F22) with a new one. Close the cover and tighten the screw.
Can I measure current above 10A with this meter?
No, the maximum current rating is 10A for 10 seconds. Do not exceed this limit to avoid damaging the meter or causing injury.
What is the continuity test and how do I use it?
Continuity test checks if a circuit is complete. Set the dial to the continuity (sound wave) symbol. Touch probes to both ends of the circuit. A beep indicates continuity (resistance <50Ω).
Why does the display show 'OL'?
OL means overload or out of range. The measured value exceeds the selected range. Switch to a higher range or check your connections.
Is the Sonel DB-1 suitable for automotive diagnostics?
Yes, it can measure DC voltage (12V/24V systems), resistance, and continuity, making it useful for basic automotive electrical checks.
How do I test a diode with the DB-1?
Set the dial to the diode symbol. Connect the red lead to anode and black to cathode. The forward voltage drop (typically 0.5-0.8V for silicon diodes) is displayed.
What safety precautions should I take?
Always use the correct range and never measure voltage in the current mode. Wear insulated gloves and avoid wet environments. Remove test leads before changing ranges.
Where can I find the complete user manual?
The full manual is available for free download in PDF format from notice-facile.com or the Sonel website. It contains detailed specifications and safety instructions.
User questions about DB-1 Sonel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual DB-1 - Sonel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DB-1 by Sonel.
USER MANUAL DB-1 Sonel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sonel
Model : DB-1
Category : Multimeter