EWS860AP - Access Point ENGENIUS - Free user manual and instructions
Find the device manual for free EWS860AP ENGENIUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | EnGenius |
| Model | EWS860AP |
| Product Type | Wi-Fi 6 (802.11ax) Access Point |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 2.4 Gbps (aggregate) |
| Network Standards | IEEE 802.11a/b/g/n/ac/ax |
| Power Supply | PoE+ (802.3at) or 12V/2A power adapter |
| Power Consumption | Max. 15 W |
| Network Ports | 1 Gigabit Ethernet port (10/100/1000) with PoE-in |
| Dimensions (L x W x H) | 200 x 200 x 35 mm |
| Weight | 500 g |
| Housing Material | White ABS plastic |
| Operating Temperature | 0 °C to 50 °C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Mounting Method | Wall or ceiling (kit included) |
| Key Features | Wi-Fi 6, MU-MIMO, OFDMA, beamforming, management via EzMaster cloud or local controller |
| Wireless Security | WPA3, WPA2, WPA, 802.1X, MAC filtering, VLAN |
| Maintenance and Cleaning | Disconnect power, clean with a soft dry cloth. Do not use chemical products. |
| Spare Parts and Repairability | No spare parts available. Device not user-repairable. |
| Warranty | 2 years (depending on reseller) |
Frequently Asked Questions - EWS860AP ENGENIUS
How to install the EnGenius EWS860AP access point?
Plug the Ethernet cable into the PoE+ port and connect the other end to a PoE switch. Mount the device on a wall or ceiling using the provided kit. Power it on and wait for the LED to turn green.
How to configure the EWS860AP for the first time?
Log in to the web interface via the default IP address (192.168.1.1). Use username 'admin' and password 'admin'. Follow the setup wizard to configure the SSID and security.
What is the difference between standalone and controller-managed modes?
In standalone mode, the AP operates independently with local configuration. In managed mode, it is controlled by an EnGenius controller (physical or cloud) for centralized management. The default mode is standalone.
How to reset the EWS860AP to factory defaults?
Press and hold the Reset button on the back of the device for at least 10 seconds until the LEDs flash. Release and wait for the reboot.
What to do if the power LED does not light up?
Check that the Ethernet cable is properly connected to an active PoE+ port. If using a power adapter, ensure it is plugged in. Test with another cable or port.
How to update the firmware of the EWS860AP?
Download the latest firmware from the EnGenius website. Log in to the web interface, go to 'Administration' > 'Firmware Update' and select the file. Do not power off during the update.
Does the EWS860AP support VLAN?
Yes, it supports 802.1Q VLAN. You can configure multiple SSIDs with different VLANs in 'Network' > 'VLAN' settings.
What are the benefits of Wi-Fi 6 on this access point?
Wi-Fi 6 (802.11ax) offers higher data rates, better efficiency in dense environments thanks to OFDMA and MU-MIMO, and reduced power consumption for Wi-Fi 6 clients.
How to secure my Wi-Fi network with the EWS860AP?
Use WPA3 encryption if your clients support it, otherwise WPA2. Enable MAC filtering, disable WPS and SSID broadcast if necessary. Change the default administrator password.
Can I mount the EWS860AP outdoors?
No, this device is designed for indoor use only. It is not IP certified for weather resistance.
User questions about EWS860AP ENGENIUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual EWS860AP - ENGENIUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWS860AP by ENGENIUS.
USER MANUAL EWS860AP ENGENIUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ENGENIUS
Model : EWS860AP
Category : Access Point