Luca ZLU-M90CS - Basket Zephyr - Free user manual and instructions
Find the device manual for free Luca ZLU-M90CS Zephyr in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Under cabinet hood |
| Brand | Zephyr |
| Model | Luca ZLU-M90CS |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 65 cm (adjustable) |
| Weight | 18 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Motor power | 2 x 150 W |
| Max airflow | 600 m³/h |
| Max noise level | 65 dB(A) |
| Lighting | LED, 2 x 3 W |
| Filters | Washable metal (2 pieces) |
| Control | Touch with display |
| Speeds | 3 speeds + boost |
| Exhaust diameter | 150 mm (top or rear outlet) |
| Recirculation | Possible with charcoal kit (optional) |
| Energy class | A |
| Repairability index | 7.5 / 10 |
| Warranty | 2 years |
| Filter maintenance | Dishwasher safe monthly cleaning |
| Safety | Automatic shut-off, overheat detection |
Frequently Asked Questions - Luca ZLU-M90CS Zephyr
How to install the Luca ZLU-M90CS hood?
Attach the wall bracket following the provided drilling template, connect the exhaust duct (diameter 150 mm) and plug in the power supply. For recirculation installation, add the charcoal kit (not included). Refer to the manual for exact dimensions.
How to clean the metal filters?
Remove the filters and wash them in the dishwasher at max 65°C or by hand with a mild detergent. Dry them completely before reinstalling. Monthly cleaning is recommended.
Can the hood be used in recirculation mode?
Yes, with the activated charcoal filter kit (reference ZCC-001). Install the filters above the metal filters and follow the assembly diagram to seal the air outlet.
What to do if the hood does not turn on?
Check the power supply (fuse, circuit breaker). Ensure the filters are properly engaged (safety switch). If the problem persists, contact customer service.
The noise level is high, is that normal?
At maximum speed (boost), the noise reaches 65 dB(A), which is normal for a flow rate of 600 m³/h. For quieter operation, use lower speeds. Make sure the duct installation is correct (no vibrations).
How to replace the LED lighting?
The LEDs are integrated and cannot be replaced individually. In case of failure, contact customer service to order a complete lighting module (reference ZLED-LUC).
Is a remote control provided?
Yes, the hood comes with an infrared remote control to adjust speeds, lighting, and the boost function. Range approximately 5 meters.
What is the energy class of this hood?
The Luca ZLU-M90CS hood is rated A according to European standards, with an annual consumption of about 35 kWh.
How to change the charcoal filter in recirculation mode?
Replace the charcoal filters every 3 to 6 months depending on usage. Open the access hatch, remove the old filters and insert new ones (ref. ZCC-001). Close the hatch.
Where to find spare parts?
Spare parts (metal filters, remote control, LED module, charcoal kit) are available from Zephyr customer service or on the official website. Use model number ZLU-M90CS to order.
User questions about Luca ZLU-M90CS Zephyr
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual Luca ZLU-M90CS - Zephyr and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Luca ZLU-M90CS by Zephyr.
USER MANUAL Luca ZLU-M90CS Zephyr
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zephyr
Model : Luca ZLU-M90CS
Category : Basket