Oval 6 - Speaker The Box - Free user manual and instructions
Find the device manual for free Oval 6 The Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speaker |
| Brand | The Box |
| Model | Oval 6 |
| Type | Bookshelf Speaker |
| Woofer Size | 6.5 inches |
| Tweeter Size | 1 inch silk dome |
| Power Handling (RMS) | 100 W |
| Impedance | 8 ohms |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 88 dB |
| Dimensions (W x H x D) | 200 x 300 x 250 mm |
| Weight | 5.2 kg |
| Enclosure Type | Bass Reflex |
| Cabinet Material | MDF |
| Finish | Black vinyl |
| Grille | Removable cloth grille |
| Recommended Amplifier Power | 20 - 150 W |
| Connectivity | Screw-type speaker terminals |
| Placement | Bookshelf or speaker stand |
| Warranty | 2 years |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use any solvents. |
| Safety Precautions | Keep away from moisture and heat sources. Do not open the cabinet. |
Frequently Asked Questions - Oval 6 The Box
How do I connect the Oval 6 speaker to my amplifier?
Use standard speaker wire with banana plugs or bare wire. Connect the positive terminal (red) to the amplifier's positive output and the negative terminal (black) to the negative output. Ensure the amplifier is turned off during connection.
What is the recommended amplifier power for the Oval 6?
The Oval 6 works best with an amplifier delivering between 20 and 150 watts RMS per channel at 8 ohms. Using an amplifier within this range ensures optimal performance and prevents damage.
Can I use the Oval 6 as a center channel speaker?
Yes, the Oval 6 can be used as a center channel speaker in a home theater setup. Place it horizontally or vertically, but ensure it is positioned at ear level for best sound dispersion.
How should I position the Oval 6 speakers for best sound?
Place the speakers at ear level, ideally on stands or bookshelves. Space them at least 1 meter apart and angle them slightly towards the listening position. Avoid placing them in corners to reduce bass boom.
Is the Oval 6 a passive or active speaker?
The Oval 6 is a passive speaker, meaning it requires an external amplifier or receiver to power it. It does not have a built-in amplifier.
What type of speaker wire should I use?
Use 14-16 gauge speaker wire for runs up to 15 meters. Thicker wire (12 gauge) is recommended for longer distances. Ensure the wire is properly stripped and securely connected.
How do I clean the Oval 6 speaker?
Wipe the cabinet with a dry, soft cloth. Do not use any cleaning agents or water. The grille can be gently vacuumed with a soft brush attachment. Avoid touching the drivers.
What is the impedance of the Oval 6?
The Oval 6 has an impedance of 8 ohms. This is a standard impedance compatible with most home audio amplifiers and receivers.
Can I bi-wire or bi-amp the Oval 6?
The Oval 6 does not support bi-wiring or bi-amping as it has a single pair of speaker terminals. Use a single cable connection from the amplifier.
What should I do if the speaker produces no sound?
Check all connections: ensure the speaker wire is securely attached to both the speaker and amplifier terminals. Verify the amplifier is powered on and not in mute mode. Test with another speaker to isolate the issue. If the problem persists, contact support.
User questions about Oval 6 The Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Oval 6 - The Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Oval 6 by The Box.
USER MANUAL Oval 6 The Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : The Box
Model : Oval 6
Category : Speaker