LED Silent Bar - Projector Eurolite - Free user manual and instructions
Find the device manual for free LED Silent Bar Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Bar Projector |
| Brand | Eurolite |
| Model | LED Silent Bar |
| Dimensions (L x W x H) | 1040 x 140 x 200 mm |
| Weight | 5.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 100 W |
| LED Type | 12 x 10W RGBW SMD |
| Beam Angle | 25° |
| Control Modes | DMX, Standalone, Master/Slave, Music Control |
| DMX Channels | 4/8/12 selectable |
| Housing Material | Aluminum |
| Cooling System | Passive (no fan) |
| Noise Level | 0 dB (silent) |
| Ingress Protection | IP20 |
| Mounting | Truss with omega brackets |
| Connectors | DMX in/out (3-pin XLR), Power input (PowerCON compatible) |
| Display | OLED |
| Certifications | CE, RoHS |
| Accessories Included | Power cable, user manual, omega brackets |
| Maintenance & Cleaning | Use a soft damp cloth; do not use solvents or abrasive cleaners. |
| Repairability | Contact Eurolite support for spare parts and repair service. |
Frequently Asked Questions - LED Silent Bar Eurolite
How do I set the DMX address on the LED Silent Bar?
Use the control panel to navigate to the DMX address menu. Press 'Menu' and use the up/down buttons to set the desired address. Confirm by pressing 'Enter'.
Can I use this fixture without a DMX controller?
Yes, you can use it in standalone mode. Select 'Auto' or 'Music' mode via the onboard menu for sound-activated or built-in programs.
What is the maximum number of units I can daisy chain?
You can daisy chain up to 10 units when using master/slave mode. For DMX, up to 32 units per DMX universe.
How do I clean the LED Silent Bar?
Disconnect power, then use a soft, damp cloth to clean the housing and lens. Do not use alcohol or harsh chemicals. Ensure the unit is completely dry before reconnecting.
The fixture does not respond to DMX. What should I check?
Verify the DMX cable is properly connected and not damaged. Ensure the DMX address matches your controller. Check that the terminator is installed at the end of the chain.
Can I replace the LEDs myself?
LEDs are not user-replaceable. If an LED fails, contact Eurolite support for repair options.
What power connectors are required?
The fixture uses a PowerCON-compatible input. A power cable with a suitable plug for your region is included. Ensure the voltage matches 100-240V.
Is the LED Silent Bar suitable for outdoor use?
No, the IP20 rating means it is only suitable for indoor, dry locations. Avoid exposure to moisture or dust.
How do I update the firmware?
Firmware updates can be performed via a DMX controller with RDM support. Connect a compatible interface and follow the manufacturer's instructions. Check Eurolite website for updates.
What accessories are available for this fixture?
Optional accessories include mounting brackets, flight cases, and diffusion filters. Contact your Eurolite dealer for more information.
User questions about LED Silent Bar Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual LED Silent Bar - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED Silent Bar by Eurolite.
USER MANUAL LED Silent Bar Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED Silent Bar
Category : Projector