TransPort WR44R - Router Digi - Free user manual and instructions
Find the device manual for free TransPort WR44R Digi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Cellular Router |
| Brand | Digi |
| Model | TransPort WR44R |
| Dimensions | 5.0 x 9.8 x 14.5 cm (1.97 x 3.86 x 5.71 in) |
| Weight | 0.45 kg (0.99 lb) |
| Power Input | 12-48 VDC |
| Power Consumption | 12 W typical |
| Cellular Connectivity | 4G LTE with fallback to 3G/2G |
| Ethernet Ports | 4x Gigabit Ethernet (2x PoE) |
| Serial Ports | 1x RS-232/422/485 |
| Wi-Fi | Dual-band 802.11 a/b/g/n/ac |
| VPN Support | IPsec, OpenVPN, GRE |
| Firewall | Stateful packet inspection, NAT, ACL |
| USB Ports | 1x USB 2.0 Host |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Ingress Protection | IP30 |
| Maintenance | Keep clean and dry; avoid exposure to dust, moisture, and extreme temperatures |
| Cleaning | Use a soft, dry cloth; do not use abrasive cleaners or solvents |
| Safety Certifications | UL/CSA, FCC, CE, IC |
| Spare Parts | Power adapter, antennas, mounting brackets available from authorized dealers |
| Repairability | No user-serviceable parts; contact Digi support for repairs |
Frequently Asked Questions - TransPort WR44R Digi
How do I factory reset the TransPort WR44R?
Press and hold the reset button (located on the back panel) for at least 10 seconds using a paperclip. The device will reboot to factory defaults.
Can I use the WR44R with any cellular carrier?
The WR44R supports multiple 4G LTE bands and is carrier-agnostic. However, you must ensure it is unlocked and has the correct SIM card for your network.
How do I change the Wi-Fi password?
Log in to the web interface (default IP: 192.168.1.1). Go to Wireless > Security and set a new passphrase. Save and reboot if prompted.
What is the default IP address and login credentials?
Default IP: 192.168.1.1. Username: admin, Password: admin. It is strongly recommended to change these after initial setup.
Does the WR44R support PoE?
Yes, two of the four Ethernet ports support Power over Ethernet (PoE) to power devices such as IP cameras or access points.
How can I troubleshoot a lost cellular connection?
Check the SIM card is correctly inserted and active. Verify the antenna connections. Log in to the router and check the cellular status under Status > Cellular. Ensure the correct APN is configured.
Can I use the WR44R as a VPN server?
Yes, it supports IPsec and OpenVPN server modes. Navigate to VPN > Server to configure. You will need to set up user authentication and certificates.
What is the maximum number of connected devices?
The router can handle up to 254 simultaneous devices on the LAN via DHCP. Performance may vary based on network load and cellular bandwidth.
How do I update the firmware?
Download the latest firmware from Digi's support site. Log in, go to Administration > Firmware Upgrade, upload the file, and click Upgrade. Do not power off during the update.
Is the WR44R suitable for outdoor use?
It is rated IP30, meaning it is protected against small tools and wires but not against water. It should be installed in a weatherproof enclosure if used outdoors.
User questions about TransPort WR44R Digi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual TransPort WR44R - Digi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TransPort WR44R by Digi.