TransPort DR64 - Router Digi - Free user manual and instructions
Find the device manual for free TransPort DR64 Digi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Router |
| Brand | Digi |
| Model | TransPort DR64 |
| Dimensions (W x D x H) | Approximately 200 x 150 x 40 mm |
| Weight | Approximately 500 g |
| Power Supply | 12 V DC, 2 A |
| Power Consumption | Typical 12 W |
| Ethernet Ports | 4 x 10/100/1000 Mbps |
| Serial Ports | 1 x RS-232 |
| Wireless Connectivity | 4G LTE, Wi-Fi 802.11 b/g/n |
| VPN Support | IPsec, OpenVPN, PPTP, L2TP |
| Routing Features | Static routing, RIP, OSPF, BGP |
| Firewall | Stateful inspection, NAT, ACL |
| Management | Web GUI, CLI, SNMP, Digi Remote Manager |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC, IC, RoHS |
| Installation | Desktop or wall mountable |
| Cleaning | Wipe with a dry, soft cloth |
| Safety | Use only supplied power adapter; keep away from liquids |
| Spare Parts | Power adapter, antennas, mounting screws |
| Repairability | Contact authorized service center for repairs |
Frequently Asked Questions - TransPort DR64 Digi
How do I reset the Digi TransPort DR64 to factory defaults?
Press and hold the reset button on the rear panel for 10 seconds until the LED blinks. The router will reboot with factory settings.
How can I access the web-based configuration interface?
Connect your computer to one of the LAN ports. Set your computer's IP to 192.168.1.x (subnet 255.255.255.0). Open a browser and go to 192.168.1.1. Login with default credentials (admin / admin).
What should I do if the router does not power on?
Check the power cable and adapter. Ensure the power outlet is working. Try using a different power adapter with the same specifications (12V DC, 2A).
How do I configure the cellular connection?
Go to the web interface, navigate to Cellular > Mobile. Enter your APN, username, and password provided by your carrier. Enable the cellular interface and save changes.
Can I use the router outdoors?
The router is designed for indoor use. If outdoor installation is required, it must be placed in a weatherproof enclosure within the specified temperature and humidity ranges.
How do I update the firmware?
Download the latest firmware from Digi's support site. In the web interface, go to Administration > Firmware Update. Upload the file and confirm. Do not power off during the update.
What is the default IP address of the router?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0.
How do I set up a VPN connection?
Navigate to VPN > IPsec (or OpenVPN) in the web interface. Configure the remote endpoint, authentication, and encryption settings according to your VPN provider's instructions.
The router keeps disconnecting from the internet. What can I do?
Check the cellular signal strength in Cellular > Status. Ensure the antenna is properly connected. Try a different SIM card or positioning the router for better reception. Also check for firmware updates.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. Search for 'Digi TransPort DR64' on the site.
User questions about TransPort DR64 Digi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual TransPort DR64 - Digi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TransPort DR64 by Digi.
USER MANUAL TransPort DR64 Digi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Digi
Model : TransPort DR64
Category : Router