GA09 - Controller ACME - Free user manual and instructions

Product Type	Controller
Brand	Acme
Model	GA09
Dimensions (W x H x D)	120 mm x 80 mm x 40 mm
Weight	200 g
Power Supply	24V DC
Power Consumption	5 W
Display	LCD, 2 lines x 16 characters
Inputs	2 digital inputs, 1 analog input (0-10V)
Outputs	2 relay outputs (max 250V/2A), 1 analog output (0-10V)
Communication	RS485 Modbus
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
Protection Class	IP40 (front panel)
Main Functions	PID control, temperature control, process monitoring
Care and Cleaning	Wipe with a soft, dry cloth. Do not use solvents.
Safety Features	Overload protection, short-circuit protection
Spare Parts and Repairability	Available through authorized service centers
General Information	Includes user manual, mounting brackets, and connectors

Frequently Asked Questions - GA09 ACME

How do I power the GA09 controller?

Connect a 24V DC power supply to the terminals marked PWR. Observe polarity.

What is the maximum load for the relay outputs?

Each relay output can handle up to 250V AC or 30V DC at a maximum current of 2A.

Can I use the GA09 for temperature control?

Yes, it supports PID control and can be configured for temperature sensors like thermocouples or RTDs.

How do I reset the controller to factory defaults?

Press and hold the SET button for 10 seconds until the display shows 'rES'. Confirm with ENT.

What type of communication protocol does it support?

It supports Modbus RTU over RS485. Address and baud rate are configurable in the setup menu.

How do I clean the front panel?

Use a soft, dry cloth. Avoid abrasive cleaners or liquids that could seep into the enclosure.

Can I connect multiple GA09 controllers together?

Yes, via the RS485 bus. Each unit must have a unique Modbus address.

What does the alarm output do?

The alarm relay activates when a process value exceeds the set high or low alarm limits.

Is the GA09 suitable for outdoor use?

No, it is intended for indoor use only with an IP40 rated front panel. Protect from moisture and extreme temperatures.

How do I update the firmware?

Firmware updates require a USB-to-RS485 adapter and the Acme updater software. Contact support for the latest version.

USER MANUAL GA09 ACME

PC-USB Digital gamepad

General description

1	4 easy-to-reach("Fire") buttons
2
3
4

L1	Shoulder buttons
R1
L2	Trigger buttons
R2

5 BURST button

6 CLEAR button

7 Mini Left Stick

8 Mini Right Stick

9 9 button

10 10 button

11 Analog / Digital mode changing button

12 8-way D-pad

13 X-input / D-input mode changing button

GB

Important safety instructions

When using electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING.

DANGER – As with most electrical appliances, electrical parts are electrically live even when it is off. To reduce the risk of electrical shock:

1. Do not place or store appliance where it can fall.

2. Do not place in or drop into water or other liquid.

3. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

1. Do not expose the controller to high temperature, high humidity or direct sunlight. (Use in an environment between 5 – 35°C / 41 – 95°F).
2. Do not allow liquid or small particles to get into the controller.
3. Do not put any heavy objects on the controller.
4. Never disassemble or modify the controller.
5. Do not twist the cable or pull it forcibly.
6. Do not bend, throw or drop the controller or subject it to strong physical shock.
7. Do not touch the metal parts or insert foreign objects in the controller.

Using the appliance

INSTALLING AND TESTING

1. Connect the USB cable of your game pad to a USB port on your computer.

GB

1. Insert the driver CD and double click on the "USB vibration Joystick" icon then step by step as screen display. The driver will be automatically setup by program. If you want to cancel this install action, then click the "Cancel" to cancel the installation.
2. The game pad is now installed successfully and ready to play. Once everything stated above is normal, you can exit and start playing the games with your game pad.
3. To configure the device, click:

Start → Control panel → Game controllers.

1. Select the required device.
2. Now click Properties to test and calibrate all functions in the menu. Press the joystick direction keys, action buttons and function buttons. The testing page will have the corresponding reactions which show you if the function keys and action buttons are good or not.

Vibration function

The Gamepad has internal motor which work only in games supporting "Force Feedback" function and when supplied drivers have been installed. See the manual of your game on whether the game supports vibration or not. If problems persist, check whether vibration support was activated in the game options.

Notes:

1. Ensure that your game software supports game controllers.
2. In order to use the vibration function, your game's software must support Force Vibration/Force Feedback.
3. If some buttons do not work, check key settings in the game's options menu.

HOW TO USE DIGITAL MODE

If you want to use Digital mode, you need to press ANALOG button (11). In Digital mode, the left stick supports D-pad function with X, Y axis.

GB

HOW TO USE ANALOG MODE

If you want to use Analog mode, you need to press ANALOG button (11). In Analog mode, the left stick supports X, Y axis and right stick supports Z, Rz axis. It is 8 way function mode for D-pad. Please note that when you push the center of analog stick, it turns on L3 button function (left stick) and R3 button function (right stick).

Cleaning

• To clean the Game Pad, wipe with a mildly damp cloth.
- Never immerse into water, as the unit contains sensitive electronic components that may be destroyed, voiding your warranty.
- Do not use any harsh cleaners or disinfectants on your Game Pad.
- A damp cloth with a dab of dish-washing detergent or "Computer Case and Monitor" cleaning solution available at any computer store will be sufficient.

Storage

• When not in use, store your Game Pad in a dust-free area, preferably in its original packaging.
• Keep all the Game Pad components away from sources of major heat (baseboard heaters, car dashboard, etc.).
• Keep the Game Pad away from any major magnetic sources.

Troubleshooting

My game pad doesn't work

- Check the USB port to which it is connected. It is possible that USB port is dead. Try to connect another appliance to this port to find out.

GB

- The power cord of the game pad can by damaged. Unplug the USB port from power socket and check it carefully. If it is damaged, you must give it to replace by authorized service.

My game pad drivers can't be installed

• Check if your OS is supported for this device. Supported OS list is on your game pad package.
• Check if your CD-ROM device is working well. You can check it by inserting other CD-ROM. If another CD is readable with your device, maybe your CD was damaged. In this case, you can download our product drivers from our page: http://www.acme.eu.

Waste Electrical and Electronic Equipment (WEEE) Symbol

The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product.

Olulised ohutusjuhised

INSTALACJA I SPRAWDZENIA

Start —> Control panel —> Game controllers.

HOGYAN KELL ALKALMAZNI A DIGITÁLIS MÓDOT

HOGYAN KELL ALKALMAZNI AZ ANALÓG MÓDOT

Product Product model
Product purchase date Seller name, address
Failures (date, description, position of the person who accepts the product, first name, last name and signature)

1. Warranty period

Warranty enters into force starting with the day when the buyer acquires the product from the seller. Warranty period is indicated on the package of the product.

2. Warranty conditions

The warranty is valid only by providing an original document of the product acquisition and this warranty sheet, which includes name of the product model, product purchase date, name and address of the seller.

If it is noticed during the warranty period that the product has faults and these faults where not caused by any of the reasons when the warranty is not applied as indicated in the paragraphs below, manufacturer undertakes to replace the product.

The warranty is not applied to regular testing, maintenance and repair or replacement of the parts which are worn out naturally.

The warranty is not applied if damage or failures occurred due to the following reasons:

usage and/or operating the product without following the manual, technical requirements and safety standards as provided by the manufacturer, and additionally, inappropriate warehousing, falling from heights as well as hard strikes.

• Corrosion, mud, water and sand.
• Repair works, modifications or cleaning, which were performed by a service not authorised by the manufacturer.
• Usage of the spare parts, software or consumptive materials which do not apply to the product.
- Accidents or events or any other reasons which depend on the manufacturer, which includes lightning, water, fire, magnetic field and inappropriate ventilation.
- If the product does not meet standards and specifications of a particular country, in which it was not bought. Any attempt to adjust the product in order to meet technical and safety requirements such as those in the other countries withdraws all the rights to the warranty service.

If no failures are detected in the product, all the expenses in relation to the service are covered by the buyer.

Model: GA09

Designed in EU by ACME Europe UAB,

Raudondvario pl. 131B, LT-47191, Kaunas, Lithuania

Rev. 1.0 Printed in China

acme®