MTSM13 - Motion detector ACME - Free user manual and instructions
Find the device manual for free MTSM13 ACME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | ACME |
| Model | MTSM13 |
| Category | Motion Detector |
| Detection Technology | Passive Infrared (PIR) Sensor |
| Detection Range | Up to 12 meters |
| Detection Angle | 120 degrees |
| Power Supply | 3 x AAA batteries (1.5V DC) |
| Battery Life | Up to 2 years (typical) |
| Mounting Type | Wall mounted with bracket |
| Operating Temperature | -10°C to 40°C |
| Dimensions (H x W x D) | 110 x 60 x 40 mm |
| Weight | 100 grams |
| LED Indicator | Red LED for alarm status |
| Alarm Output | Built-in siren up to 85 dB |
| Ingress Protection | IP20 (indoor use only) |
| Installation | Simple screw mounting, battery powered |
| Maintenance | Clean lens with soft dry cloth periodically |
| False Alarm Protection | Immune to false triggers from small pets |
| Spare Parts | Not user serviceable; batteries replaceable |
| Reparability | No user repair; contact ACME support |
| Manual | 20 pages PDF in English available on notice-facile.com |
Frequently Asked Questions - MTSM13 ACME
How to install the ACME MTSM13 motion detector?
Choose a location at least 2 meters above the floor, with a clear view of the detection area. Mount the bracket using screws and slide the detector onto it. Insert 3 AAA batteries and adjust the angle. See the manual for details.
How to adjust the detection range?
The detection range is fixed to 12 meters. You can tilt the sensor head to change the effective area. For lower sensitivity, install a partial shield (not included) or reposition the detector.
What should I do if the LED does not light up during detection?
Check that the batteries are correctly inserted and have enough charge. Ensure the LED setting is enabled in the internal switch (if available). If the problem persists, replace the batteries.
How to clean the motion detector?
Use a soft dry cloth to gently wipe the lens and the body. Do not use water, solvents or abrasive cleaners. Regular cleaning prevents false alarms.
Is the MTSM13 suitable for outdoor use?
No, the device has an IP20 rating, which means it is only protected against objects larger than 12.5 mm and not against water. Use it indoors or under a roof.
How long do the batteries last?
In normal operation, the batteries last up to 2 years. Low battery warning may be indicated by a blinking LED, depending on the model configuration.
Can the motion detector avoid false alarms from pets?
Yes, the sensor features pet immunity to prevent false alarms from animals weighing up to 18 kg (approximate). Place the detector at the recommended height to ensure this.
What is the detection angle of the device?
The detector covers a 120-degree angle in front of the sensor. This provides a wide field of view suitable for most rooms.
How do I change the batteries?
Open the battery compartment by sliding the cover off. Remove old batteries and insert three new AAA 1.5V batteries following the polarity signs. Close the cover and test the detector.
Where can I find the original manual for the ACME MTSM13?
You can download the official PDF manual with 20 pages in English for free from notice-facile.com. Simply search for MTSM13 ACME to access the manual.
User questions about MTSM13 ACME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual MTSM13 - ACME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTSM13 by ACME.
USER MANUAL MTSM13 ACME
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACME
Model : MTSM13
Category : Motion detector