AquaPure PLC700 - Water pump Jandy - Free user manual and instructions
Find the device manual for free AquaPure PLC700 Jandy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump (Pool Pump) |
| Brand | Jandy |
| Model | AquaPure PLC700 |
| Power | 1.5 HP |
| Voltage | 115V/230V (Dual Voltage) |
| Flow Rate | 70 GPM at 50 ft head |
| Max Head | 50 ft |
| Inlet/Outlet Size | 2 inch NPT |
| Material | Corrosion-resistant Thermoplastic |
| Dimensions (L x W x H) | 20 x 10 x 12 inches |
| Weight | 35 lbs |
| Motor Type | Permanent Magnet (Energy Efficient) |
| Features | Self-priming, Quiet Operation, Thermal Overload Protection |
| Maintenance | Clean strainer basket regularly; inspect seals and O-rings |
| Safety | Overload and Thermal Protection |
| Spare Parts & Reparability | Available through authorized Jandy dealers |
| Certifications | UL, CSA |
| Warranty | 3 years |
Frequently Asked Questions - AquaPure PLC700 Jandy
What is the recommended voltage for the Jandy AquaPure PLC700?
The pump operates on either 115V or 230V (dual voltage). Ensure your electrical supply matches the selected voltage.
How do I prime the AquaPure PLC700 pump?
FIll the pump strainer basket with water before starting. The pump is self-priming, but the basket must be full to avoid dry running.
What is the maximum flow rate of this pump?
The AquaPure PLC700 delivers up to 70 GPM at a head of 50 feet, suitable for most residential pools.
How often should I clean the strainer basket?
Clean the strainer basket weekly during heavy use, or when you notice reduced flow. Turn off the pump before opening the lid.
What type of motor does the AquaPure PLC700 use?
It features a permanent magnet motor for higher energy efficiency and quieter operation compared to standard induction motors.
Can the pump be used with saltwater pools?
Yes, the thermoplastic construction is corrosion-resistant, making it suitable for saltwater and chlorinated pools.
What should I do if the pump loses prime?
Check for air leaks on the suction side, ensure the strainer basket is full of water, and verify that the water level is above the skimmer. Re-prime as needed.
Is the pump protected against overload?
Yes, it has built-in thermal overload protection that shuts off the motor if it overheats, preventing damage.
What are the dimensions of the pump?
Approximately 20 x 10 x 12 inches (L x W x H), allowing easy installation in standard equipment pads.
Where can I find spare parts for the AquaPure PLC700?
Spare parts are available through authorized Jandy dealers or online retailers. Use the model number for exact fit.
User questions about AquaPure PLC700 Jandy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual AquaPure PLC700 - Jandy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AquaPure PLC700 by Jandy.
